Ure Museum Database



Browse
There are 639 objects for which Shape_description contains → a
11.10.15 With vertical ring handles. The whole of the body fluted horizontally. Side of foot ridged; underside concave with a narrow flat resting surface and a slight projection in the centre. 2003.29.0084.jpg
11.10.16 Miniature. Open mouth with slightly flared rim. Body with a wide neck, three grooves on lower body, two grooves on foot ring base conical with flat resting surface. 2003.29.0090.jpg
11.10.21 If the foot is restored correctly this is a variant of Ure's type K 2 (Ure 1927, 68), which is the most common Haemonian skyphos, as judged by the Agora material: cf. Agora 23, 60, esp. no. 1516, pl. 103 (with the same type of foot); ABV 565-71, 598-710 Slightly concave black rim; shallow bowl with flat underside; moulded ring foot, with concave inner surface. 2008.99.0780.jpg
11.10.3 A squatting, male satyr 2002.97.0761.jpg
13.10.1 Rat-tanged dirk (sword blade used as a dagger or spearhead), with long thin blade, pointed at both ends, with sloping shoulders. A rib runs nearly the full length of the piece (flattened in the last 2 cm of the blade end). The middle of the rib, near the attachment end, is thin, rhomboidal in section, narrowing to pointed tip or tang which is turned up slightly at the end. Approximately 1/4 down the length of the blade the flange broadens, so that two flat sides spread from the centre rib. The blade end of the dirk has nearly straight sides, but tapers gently to a rounded tip. Catling's type 1d; near Åstrom's type I4. As Catling suggests (1964, 56) the rat-tailed weapon, the most characteristic of prehistoric Cypriote metal forms, occurs in so many sizes that it is impossible to classify them as swords, dirks, daggers, or even spearheads. 2007.99.0100.jpg
13.10.11.1 Ovoid in shape with a hole through the centre on the smallest axis, and an edge around the widest part of the bead.
13.10.11.11 Ovoid with a piercing through the longest axis and a ridge around the middle.
13.10.11.12 Ovoid with a piercing through the longest axis and a distinctive girth.
13.10.11.14 ovoid with a piercing through one axis and a pronounced girth.
13.10.11.15 Ovoid with piercing through th shotrest axis and a pronounced girth.
13.10.11.16 Ovoid in shape with a hole through the centre on the smallest axis and an edge around the widest part of the bead.
13.10.11.2 Ovoid in shape with a hole through the centre on the smallest axis, and an edge around the widest part of the bead.
13.10.11.3 Ovoid bead with a hole though the longest axis. DSCN0189.jpg
13.10.11.4 spherical bead with a hole though the shortest axis
13.10.11.8 Uneven sphere with a hole though the middle.
13.10.17 Barrel-shaped jug, deep-spreading lip, half has broken away. One handle, with a raised area along the middle. Clay on body rounded into a point in the middle of either side. 2003.92.0048.jpg
13.10.19 Wheel made open bowl with a concave foot. 2008.99.0140.jpg
13.10.2 Nearly rectangular piece, lentoid in section, narrowing gradually on all sides, raised more prominently on one side, which has a ridge down the centre of the lower part. 2010.99.0129.jpg
13.10.23 Elongated ovoid body, tapering at the bottom to a convex but nearly flat base and at the top, more gradually, to a very short neck with concave sides, then a broad rim, slightly concave on upper and lower sides, with a narrow mouth; two lugs (with wavy ridges), parallel to eachother, on either side of the vase, approximately 1/3 below the rim. 2008.03.0042.jpg
13.10.26 Shallow bowl; horizontal rim with two holes for suspension at one side, one of the holes has a thin piece of rope in it (modern?)and clay; the base is slightly bulbous (the shape is slightly irregular leading to an incline of the rim to one side); interior smooth; 'ridges' can be felt on the exterior where the clay was turned on the potter's wheel; short, wide resting surface. 2003.92.0071.jpg
13.10.27 'Cocked hat'; open lamp consisting of a shallow circular bowl; two folded in edges which form a wick rest; small rim visible at back; small central circular foot. 2005.01.0001.jpg
13.10.3 Nearly rectangular piece, bilaterally symmetrical, with a raised rib down the centre, two parallel rivets, one on either side, at the shoulder, just above the tang (where the blade may have been socketed into a wooden handle. The thickness is uniform for most of the length of the dagger. ) 2008.99.0122.jpg
13.10.38 Female (?) handmade head wearing a fillet. Pointed distintive nose. 2008.01.0004.jpg
13.10.4A-B Two slightly concave disks, not joined (although they sit together well). The lid is thinner than the base with no significant rim, but a beveled edge. The mirror itself has a rim on the underside, and an offset edge on the upper part. These are clearly two parts of a Hellenistic mirror with lid, typical of Hellenistic cyprus. A pair of bronze plates could be locked together because one mirror had a low cylindrical rim into which the other, with a flanged edge, could be fitted. The inside mirror is decorated on the recessed side and polished on the flat side. The outside mirror is polished on the recessed side and sometimes decorated on the flat side. The two polished sides would then lie together, sometimes plated with silver (as in the case of an example in Amathus tomb 62, published in Excavations in Cyprus). For the Greek prototypes see See A. Schwarzmaier, Griechische Klappspiegel: Untersuchungen zu Typologie und Stil (Berlin 1997). 2010.99.0120.jpg
13.10.6 Flat bronze heart-shape piece, flaring at the pointed end, with a spool-shaped element (reel-shaped, according to Catling, as recorded in the Ure archives), horizontally arranged and attached at the centre of the upper part; Each end of the spool comprises a flat disk, while at the centre the surface is curved and narrower, so that a vertical space is revealed between the heart and the spool. 2010.99.0112.jpg
13.10.8 Shallow but wide mortar with small lip and rim. Very thick body gradually leading to a small concave foot. 2011.96.0001.jpg
14.9.103 Single fragment of an open shape, perhaps a stamnos 2007.08.0009.jpg
14.9.114 Lower half of a figurine (joins Reading 14.9.115), preserving the legs and lower torso of a nude boy, some drapery (a cloak) behind him that is twisted around his right hand, and the rectangular base on which he stands. 2002.97.0408.jpg
14.9.115 Top half of hollow figurine in the shape of a youth 2002.97.0411.jpg
14.9.119 Female head, appearing to wear sakkos, but now broken at back with a row of curls at the front. 2008.99.0080.jpg
14.9.3 Alabastron-shaped jug with one handle that joins the rim to the upper body and a delineated flat base. 2008.99.0106.jpg
14.9.41 Fragment with rim attached. The rim is offset a little and the clay bends halfway down the fragment to lead to the base of the cup. 2003.01.0096.jpg
14.9.44 Fragment with part of a sharply offset rim attached. 2003.01.0099.jpg
14.9.49 Fragment from a neckless krater with a flat projecting rim. 2003.01.0084.jpg
14.9.58 Conical with narrower neck at one end and widening to a lip at the other like a miniature vase. End with lip slopes inwards to a raised central circle. 2006.20.0325.jpg
14.9.61 Small curved rim fragment. Underside has small ridge about halfway into the fragment to the inside of which the fragment has a pronounced change of angle. 2006.20.0320.jpg
14.9.79 Fragment from a closed vase (probably amphora) 2004.46.0085.jpg
2003.6.19 Single fragment from near the attachment of a handle. 2007.03.1216.jpg
2004.8.1 Fragment from the bowl of a Skyphos. 2006.20.0564.jpg
2004.8.7 Solid, irregular trapezoid (six faces). A cylindrical hole piercing the top of the loom (diameter 0.6).
2005.3.25A-C Fragments of a kylix, A: base, foot, stem and section of body, B: rim (joins up with fragment A), C: rim 2006.20.0368.jpg
2005.3.28A-B Two fragments from a bird kylix
2005.3.29 Fragment of a bird kylix 2006.20.0385.jpg
2005.3.31 Fragment of a bird kylix rim 2006.20.0380.jpg
2005.3.32 fragment of a bird kylix 2006.20.0378.jpg
2005.3.36 Fragment of a bird kylix handle and rim 2006.20.0391.jpg
2005.7.7 Fragment of a medallion-shaped textile 2012.97.0010.jpg
2005.9.5 Cast of a low relief wall panel from Deir el Bahari. Copies relief. 2008.08.0232.jpg
2005.9.6 Cast of a low relief from an Egyptian wall. Copies a panel.
2006.12.100 A small, almost certainly non functional aryballos
2006.12.103 4 small protrusions, roughly evenly spaced. 2 seem to be from a broken handle. 2007.03.1001.jpg
2006.12.105 Fragment of rim with part of a handle 2007.03.1006.jpg
2006.12.108 Fragment of lid ? of vessel with three spurts over edge; presumably there was once a fourth. 2007.03.1014.jpg
2006.12.91 Small vessel like a flat bottomed alabastron, unlikely to have been functional
2006.12.92 Small vessel like a squat, flat based alabastron. Possibly not functional. 2007.03.0990.jpg
2006.12.95 Shaped like a very small aryballos, but seems unlikely to have been functional. 2007.03.1019.jpg
2006.12.96 Very small vessel like a flat bottomed alabastron, probably too small to have been functional 2007.03.1055.jpg
2006.12.97 Small, shallow vessel with handle, possibly originally had a second handle that has since been lost. 2007.03.0995.jpg
2007.4.106 Fragment is possibly part of a handle 2007.30.0022.jpg
2007.4.107 Fragement perhaps part of a bowl or cup. 2007.30.0015.jpg
2007.4.11 Fragment is approximately rectangular shaped, but with a triangular addition to one side. 2007.03.0775.jpg
2007.4.110 Fragment is approximately in the shape of a pentagon.
2007.4.121 Fragment possibly with part of a pouring spout 2007.30.0019.jpg
2007.4.144 Part of a circular base
2007.4.15 Perhaps a handle
2007.4.152 Base of a pot, around half of circular base remains, with stem and a small part of the bowl of the pot
2007.4.166 Shard of a pot handle: curved
2007.4.167 Curved shard of the side of a container
2007.4.17 Perhaps from a handle, or rim.
2007.4.18 Rhomboid, like a kite 2007.03.0800.jpg
2007.4.181 Curved pot shard with a handle
2007.4.216 Pouring lip of a pot, complete with rim from the top of the pot. There are holes in the pot where the liquid would come out
2007.4.70 Fragment is shaped like a trapezium. 2007.03.0735.jpg
2007.4.83 Fragment of a handle
2007.9.4 Both long edges are curved, one more greatly so, resulting in the width of fragment being much wider at one end, meetimg the horizontal edge at a small point.
2007.9.5 One long, straightish edge, the other edge in a convex curve, over all forming the vague shape of a semi-circle.
2007.9.6 Vaguely pentagon shaped, with a very pronounced point on one side.
2007.9.7 Four-sided, almost rectangular except for one side which slopes down more genlty, resulting in a noticeably acute point at one corner.
2007.9.8 Four-sided, rim edge slightly curved, one side edge curves concavely, creating a long point.
2007.9.9 Two straightish sides meet at an almost right-angle. Depending whether one looks at the outside or the inside of the fragment, there are a further one or two sides, due to the very uneven nature of the edge.
2008.7.1 U-shaped strap handle attached to a rim fragment
2008.7.119 Trapedoidal fragment, curves upwards from centre into a semi-circular peak.
2008.7.123 Trapzoidal fragment with a small pierced cylindrical handle on the rim (for string?)
2008.7.127 Trapezoidal fragment, one edge curves to a rim.
2008.7.130 Long rim fragment, slightly curving but steeply angular on exterior of fragment. Almost a long pyramid in shape, with a curved base.Small rounded handle on one broken edge.
2008.7.133 Hammer-head shaped fragment, with one semi-circular face. Slopes up to a rim.
2008.7.135 Rim fragment with handle; exterior has a handle with a hole through it, possibly to put string through
2008.7.136 Rectangular fragment. Getle dip in the middle curving upwards either side to create a waved shape.
2008.7.198 Pentagonal shaped fragment, possibly from a rim
2008.7.3 Rectangular fragment thicker at one end and curved sharply at the other. Possibly a handle fragment.
2008.7.4 An almost pentagon shaped fragment preserving some of base and a steeply curved side.
2008.7.41 Rim fragment with 4 broken edges; Exterior: LH side has a ridge toward base of fragment
2008.7.54 Hexagonal fragment from possibly neck of a pot as the exterior top of the fragment curves out into what could be a lip; exterior base of fragment also begins to curve outwards; horizontal curvature to the fragment
2008.7.57 Triangular rim fragment with a ridge around the rim
2008.7.6 Pentagon shaped fragment, preserving part of a very slightly curved body.
2008.7.8 Triangular fragment preserving part of the body of a vessel.
2016.3.1 Round body, convex shoulders and concave discus with a regular filling hole, roughly at the lower end of the discus; short round nozzle, leading convexly to the base, and round tip with ovoidal wick hole at centre. Vertical round handle, raising up at rear part of the shoulder. 2016.99.0260.jpg
2016.5.1 Projecting disc-shaped rim with rounded lip from which emerges a short tubular neck which curves into a globular body with a flat bottom. A narrow strap handle curves to the shoulder. The bottom of the vase has a small flat recess in the centre. 2016.01.0003.jpg
2016.5.2 Open rim separated from the body by a grooved band. Shallow body. Slightly oblique handles of the stick type. Conical hollow foot with flexed walls.
2016.5.3 Flaring mouth, wide elongated conical neck, separated from a large ovoid body by a moulded groove. Small round foot. Handle is missing. 2016.01.0031.jpg
22.11.1 Globular body with spout to one side. In centre at top is a 'false' neck with a round covering (attached but meant to look like a false lid) attached to two handles which come down to shoulder, one either side. Very small foot, flat and reserved base. 2001.99.0013.jpg
22.3.22 Rim fragment of a bell krater 2006.20.0109.jpg
22.3.26 The rim is flat and ring-shaped, the body is conical, the stem is very short and cylindrical and the foot is ring-shaped with a concave area underneath. 2003.97.0922.jpg
22.3.4 Wide mouth with a rim at 45 degrees. 2003.97.0837.jpg
22.3.40 Downturned molded rim, from which projects the horizontal element of a ridged strap handle that curves back in and descends to the shoulder. Body drops sharply from shoulder and tapers to raised base. Cf. several examples in Lipari 2, esp. Lipari 2, 138, pl. CXXXVI.4a (tomb 385, 'stile Gnathia') 2003.37.0005.jpg
22.3.41 Single triangular fragment preserves part of the base of a closed shape, perhaps a jug, with a flat bottom. 2004.99.0530.jpg
22.3.42 Open lamp with wide, shallow, circular body, with curved shoulder and a down turned rim. covered flat nozzle with a large oval wick hole. Horizontal band handle which follows the back of the body. Foot is shallow and slightly concave 2004.95.0093.jpg
22.9.1 Pappas figurine consisting of a rectangular body, ovoid in cross-section, flaring at the base, with a concave resting surface. At the top of the body or trunk, two rudimentary 'arms' extend in triangular forms that terminate in rounded stumps; above, the neck rises in a cylinder from which (on the front) extends a protrusion that suggests a nose, above which is a flat piece of clay coiled back on itself, resting against a widening cylindrical 'polos' crown, which is concave at the top. 2004.08.0002.jpg
23.11.31A2 Winged female facing forwards, wearing a long patterned skirt, and holding a sickle in her right hand. 2005.06.0109.jpg
23.11.31B1 Goddess facing left, wearing a tiered headdress over long, styled hair, and a long skirt marked with vertical stripes/drapes? The right arm terminates with a small crescent. 2005.06.0009.jpg
23.11.31B2 Winged female facing front, wearing a long patterned skirt 2005.06.0012.jpg
23.11.31BB Warrior facing right, holding a round shield with a design of spokes radiating from a central boss, and a diagonally-hefted spear. 2005.06.0013.jpg
23.11.31C2 Winged female facing front, wearing a long waisted shirt.
23.11.31E Profile figure facing left wearing a helmet and holding a shield with bike spokes formation. Appears to have once held a spear. Two prominent wide legs emerge from underneath the shield. Lead is an off-colour brown-grey. 2005.06.0030.jpg
23.11.31IIII Female facing left, wearing a pointed headdress over long styled hair. One hand appears to be held up to the face. There is a thin spike projecting upwards at the back. The skirt is belted at the waist, and is patterned with vertical bands containing zigzags or chevrons which terminate at a shin-length curved hem. The left shin and foot appear angled back to the other foot, giving the figure the appearance of walking. 2005.06.0062.jpg
23.11.31K Warrior standing in profile to the left, wearing a helmet, holding a spear and a circular shield with radiating lines. 2005.06.0070.jpg
23.11.31K2 Hand holding a wreath comprised of triangular shaped elements 2003.96.0025.jpg
23.11.31KK Male facing left, playing pipes. Wearing only a short cloak, which is wound about the shoulders and draped to fall forward over both arms. The left hand holds the pipes to the lips, and the right hand is clenched to grip an incomplete object. 2003.96.0036.jpg
23.11.31L Profile warrior holding a round shield. 2005.06.0077.jpg
23.11.31N Profile figure facing left with a flat helmet revealing the face. Only a stump of the spear remains. Holding a complete circular shield with a pattern visible. Thin legs emerge from underneath the shield. Lead is an off-colour white-grey. 2005.06.0093.jpg
23.11.31NNNN Single fragment consisting of the head and shoulders of a figure facing right. Wearing a large knobbed headdress which is decorated with tall vertical loops with a central line, over long styled hair
23.11.31Q Warrior facing right, holding a round shield with a wavy "sun" design. 2005.06.0107.jpg
23.11.31QQQQ Warrior facing right, wearing a crested helmet and carrying a round "bicycle-spoke" shield. 2005.06.0112.jpg
23.11.31RR Female figure facing left with arms held away from the sides of the body. Wearing a headdress and a long garment marked across at the chest, waist, and hem levels. 2005.06.0117.jpg
23.11.31RRRR Crested figure facing right holding a shield and a spear. The shield is decorated with a rosette and boss design, and a straight but separate element runs down from the left of the shield and across near the base. 2005.06.0119.jpg
23.11.31UU Two fragments of a female. She wears a sash, knotted at the front with a bow, over a long skirt patterned with vertical bands of single- and double-line zigzags. Her right hand is holding a plate or dish. 2005.06.0132.jpg
23.11.31X1 Winged female facing right, wearing a tiered headdress over long, styled hair. 2005.06.0148.jpg
23.11.31XXX Female wearing a long patterned skirt. The upper, larger section of the skirt is divided into four vertical bands made up of wide plain, narrow plain, wide plain, and single-line zigzag motifs. These are terminated with two horizontal bands running around the hem. 2003.96.0029.jpg
23.11.31XXXX Female wearing long skirts. The top of the figure is oddly shaped. The left arm extends down and slightly away from the side of the body, ending in a fork. The skirts are sashed at the waist, and are marked with long vertical lines ending at a wide hem with more widely spaced pairs of lines. 2005.06.0153.jpg
23.11.31Z Striding male facing left, holding a spear and a round shield with "bicycle-spoke" design 2005.06.0194.jpg
23.11.31ZZ Female facing right, wearing a long skirt marked with horizontal bands. The straight line of the back projects above the head. One arm is raised in front of the body, and the other is held at waist level. 2005.06.0161.jpg
23.11.7 Flat base; rounded lower body to which are attached two small triangular handles, circular in cross-section, which rise slightly; sharply curved join to upper body, which flares broadly to a plain, rounded rim. 2004.98.0022.jpg
23.11.8 Flat base; bulbous lower body from which emerge two horizontal handles, circular in cross-section, which rise slightly; carinated at join to upper body which flares broadly to a plain, rounded rim. 2004.98.0024.jpg
25.8.1 Lekythos of the 'Phanyllis Class' shape, with a cup mouth 2003.97.0874.jpg
25.8.5 The handle is in three tiers, with a point at the tip. 2002.97.0271.jpg
25.9.2 Central hole opening to inside of plemochoe with a ledge to receive a lid. 2003.97.0811.jpg
26.12.13 Trefoil lip from which a handle curves down to the top of the bulbous body. Deep groove separates body from wide foot. Resting surface slightly concave. 2003.97.0873.jpg
26.12.26 Trefoil lip oinochoe with a banded handle that bears a ribbed back. The body is ovaloid and the foot is conical with a round base. 2003.36.0009.jpg
26.12.27 Body narrows slightly towards top. At the bottom of the body there is a wider ledge attached to which there are three moulded lion paws as feet. 2002.97.0543.jpg
26.12.30 Shallow-bottomed with a thick-walled conical foot, flat resting surface; small ribbon handles. 2002.97.0296.jpg
26.12.33 Slightly incurving lip, with a carination just below the rim, narrowing with convex sides to a flat base, with convex sides just above base. Wire cutting marks in circular design on base. On the interior, the centre of the bowl rises up slightly. 2002.97.0349.jpg
26.12.7 Stemmed. The vessel is slanted to one side, which suggests that the base is not flat or that the body has not been made to rest flat on top of the foot. The wide rim has a flat lip. The base hollow to where the bottom of the bowl rests. 2003.58.0008.jpg
26.12.8 Piriform, with a small handle. 2007.01.0026.jpg
26.2.11 Fragment including part of rim of a very small bowl. 2013.04.0028.jpg
26.2.25 Fragment from a large bowl 2003.45.0092.jpg
26.2.68 Fragment of the bottom part of the cup of a chalice(?)or bowl(?). Single, hexagonal fragment from the floor of the bowl. 2007.03.1175.jpg
26.2.84 Large fragment preserving a complete handle and partial shoulder of a vase. 2005.02.0453.jpg
26.2.85 Fragment; probably from a broad-bottomed jug 2003.43.0095.jpg
26.4.2 The handles are almost a rectangle shape, and are shaped to angle straight out from the edge of the Kylix, turning up slightly at the end. 2002.97.0264.jpg
26.4.5 Probably from a stamnos-pyxis 2003.19.0095.jpg
26.7.11 There is a single strap-handle at the top. There is a small ball of clay, on the interior, which appears to plug up a hole at the top of the bell. Cf. especially Wolters-Bruns pl. 43.13 2002.97.0314.jpg
26.7.15 Long ribbon handles with a shallow groove level to the bottom of the handles. 2003.29.0099.jpg
26.7.2 The handles are riddled, of ellipsoid cross-section and incurving. The stem is high and thick and the foot is disk-shaped, while the concave area of the base forms a conical center. 2003.09.0004.jpg
26.7.8 Bulbous body, wider in the lower part. Projected rim with a very small discus area leading to a irreguar filling hole. Long nozzle with a wide, flat, oval wick hole. Applied strip handle attached to the rim and reaching down to the base. Flat unmarked base. Tall indentation on the left side of the body. 2002.97.0553.jpg
27.10.1 Shape A (BSA xlii, p.15). Neck and handles modern, undecorated. Body almost spherical, base flat. 2004.95.0053.jpg
27.4.1 Deep ovoid bowl with concave rim and rounded lip, narrowing to a disk foot, rounded on the exterior, sharply beveled on the interior, with a flat resting surface and a slightly convex underside. On either side a u-shaped handle, round in cross-section, rises up from just below the rim, top the height of the lip. There is a slight groove at the join of body and foot. 2004.01.0001.jpg
27.4.5 Rim turns sharply out, broad and flat on top. Handles rounded at far end and with upward twist. In centre of bowl a well 1.5 cm deep occupies the space interior of the stem. The foot appears in three stages, the first ridge being the narrowest, and the other two getting bigger in sequence. 2003.19.0007.jpg
29.11.12 Pig. Hollow, with a small (vent) hole underneath 2002.97.0748.jpg
29.11.6 Two u-shaped horizontal handles placed slightly above the lip, slightly angled upwards. Deep body descending to a groove above the ring base. 2004.05.0024.jpg
29.11.8 Flaring, slightly convex rim with rounded lip, smoothly joins a short, straight-sided cup that curves sharply to a slightly offset resting surface, slightly concave. A single strap handle curves arches between the walls of the basket on the inside. 2008.99.0398.jpg
29.5.3 Ball aryballos with a disk-shaped wide rim, a vertical banded handle and a spherical body. 2003.57.0088.jpg
29.6.1 Plaster cast of a three-sided sculptural relief
34.10.10 Gill's 'Pheidias shape'. Wide mouth with a flat rim. The handle is in two pieces branching out sideways along the rim at the top. Base is flat. 2003.97.0476.jpg
34.10.15 Gourd-shaped vessel, with an elongated ovoid body tapering into a cylindrical handle that finally terminates in elongated, rounded tip. Pierced in the bottom of the ovoid part, and ca. 2 cm from the tip. Use as a rattle is indicated by the sound of a pebble inside. 2004.95.0115.jpg
34.10.23 Molded figurine (hollowed at back in a tall rectangle) depicting Leda with the swan. Leda stands with her right foot upraised (on a rick?), and holds in her upraised left arm a himation, which wraps around her back and swirls onto the top of her right leg, to cover her pudenda, right leg, and run down the interior of her left leg. She holds the swan firmly with her right hand, so that it is tucked under her right arm. 2002.97.0419.jpg
34.10.27 Standing male figure in a cloak with his legs crossed, leaning on a support to his right. Figurine is hollow and has large hole in the back. No relief sculpture on the reverse side. 2005.89.0041.jpg
34.10.7 Inslanting rim, with plain round lip, that curves into an ovoid body on a tall foot ring, with slanting interior and exterior walls, the latter curving to a flat resting surface, with flat underside. Two u-shaped handles, round in section, rise at a diagonal from the bottom of the shoulder to high above the rim. 2008.98.0461.jpg
34.10.8 Short cylindrical knob, with grooved flat top, grooved profile, and conical stem broadening to the slightly domed top of the lid. At the midpoint of the lid, beyond a gentle groove and a ridge, the lid flares to a rounded edge, the underside of which narrows to a tapering straight sided walls that would have sat inside the vase to which it belonged (perhaps a stamnos). The underside of the lid is hollowed, rounded, and smooth. 2008.98.0476.jpg
34.2.2 Small hydria with plain everted rim, with a round lip, curving continuously to a narrow concave neck and a sloping shoulder, then an ovoid body attached to a short disk foot, tapering on both exterior and interior, with a flat resting surface and a pointed underside. The vertical strap handle, slightly concave on its outer side, reaches from the lip to the widest part of the body, where it curves into the shoulder. Two horizontal d-shaped, upcurving handles, round in section, also rise up from the join of the shoulder and body. 2002.97.0658.jpg
34.8.11 Rounded, deep fat body with a small down turning discus and a large filling hole in the centre, small 'kick' et the bottom of the reservoir. Straight sided flat long nozzle with a slightly oval wick hole. Small foot with a slightly concave base. 2005.01.0128.jpg
34.8.12 The lid is three-stepped, with a flat disk-shaped surface on top of which there are two, concentric, conical areas and the handle, which is pear-shaped, with a button-like ending. The body is amphi-conical? But the upper surface is rounder and of a smaller diameter. The stem is slim and high, the foot is three-stepped and its bottom is a larger ring-shaped surface. Underneath, the surface is concave and conical. 2005.88.0067.jpg
34.8.5 Chimney mouth. Base flat except for a central concave section. 2003.97.0434.jpg
35.4.4 Trefoil lip oinochoe, with a handle of ellipsoid cross-section that is raised higher than the lip. The body is spherical and the short foot is conical. Gill's shape 5c. 2005.88.0051.jpg
35.4.5 Wide overhung rim; handles come up to beneath the overhang in a right-angle shape; body tapers to small thin stem; very thick footring; underside recedes in almost conical shape. 2001.99.0031.jpg
35.5.34A-Q Eighteen fragments of one piece, some fragments joined (a and f each comprised of three fragments joined together, i comprised of two fragments joined. 2004.10.0001.jpg
37.11.7 Flaring mouth and wide neck separated from body by a moulded groove. Single curved handle starting at groove and bending to lip. Small foot, base slightly concave. 2003.98.0059.jpg
37.11.8 The vessel has a rope handle at its back with a rotella (connects to the rim with a bit that looks like an anklebone). The other two handles are inclined upwards and of cylindrical shape. They are attached to the upper part of the body in two spots and they are riddled. The foot is quite tall and conical (widening towards the base). 2003.36.0007.jpg
39.1.2 Strongly moulded rim, curving into a roughly cylindrical upper body that bulges out into the shallow bowl. Two vertical handles, roughly square in section, with horizontal pointed spurs, level with the rim, rejoin the body at the upper part of the bowl. Two-part moulded foot, with a domed underside. 2010.98.0301.jpg
39.8.1 Stemless cup-skyphos with an offset lip terminating in a rounded everted rim; moulded foot comprised of concave element above convex element, interrupted by a ridge at the top. 2003.93.0335.jpg
39.9.7 The body is supported by a low-stemmed, ring-shaped base, gradually widening out to the foot. The handles are handmade, almost circular and they rise a bit higher than the rim. 2003.18.0003.jpg
44.6.1 Donut shaped body; rim turns in gradually; the remains of a ribbon handle protrude from one side of the rim; diagonal footring. 2003.35.0091.jpg
45.10.1 High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder. 2004.99.0028.jpg
45.10.7A-B Tripodic pyxis (three-legs) with a lid, of cylindrical shape. There is a flat, disc-shaped, plastic ring that joins the body with the feet. 2003.94.0098.jpg
45.3.1 Everted rim below which is attached a pinched handle with a string hole; elongated piniform body. 2003.39.0002.jpg
45.6.12 Miniature. Handle bends outwards, like lekane-handle and a protrusion each side. 2003.97.0738.jpg
45.6.13 Two curved handles attached to shoulder and just below mouth. Neckhas a moulded ridge at base. The resting surface is wide and the base is concave. 2003.97.0643.jpg
45.6.16 Flared cup mouth. Strap Handle descending from top of neck to sloping shoulder. Base has a central concave section. Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p49 shape class K, pl. 15 no. 80.249 2003.97.0442.jpg
45.6.18 Flared mouth with flat on the top rim. Single strap handle curves from top of shoulder down to top of body. Small torus flat base, divided from the body with a groove. Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p40, lip type j 2003.13.0004.jpg
45.6.26 Shallow with incurved rim, round body on a high stem and a ring in centre of stem. Convex foot with a central groove and flat resting surface except for central concave circle. 2010.98.0276.jpg
45.6.30 Molded, overhanging rim with a lower flange, curving into a thin neck which gradually widens to an ovoid body; molded foot, concave on the underside. For shape cf. bottles found at Metaponto that are similar (in shape and decoration) catalogued by L. Burn in Carter 1998, 2.632-633, especially T 192-6. Cf. also Padova, Museo Civico Archeologico inv. 1746-C: Zampieri 1996, 203-204 no. 58 (ill.). 2003.37.0001.jpg
45.6.34 Bell-shaped mouth tapering to a short neck that broadens to an ovoid body. High swung strap handle joins from neck to shoulder. Conical foot. 'Pagenstecher lekythos' type. Cf. CVA Michigan 1, pl. 27.11 (smaller but similar shape and surface, said to have been found at Taranto) and Lentini inv. 61597: Lagona 1973, no. 85, pl. 11 (more slender). Both of these examples have smaller handles. For Sicilian vessels of this shape (decorated with bands or undecorated) see examples from Selinunte (Anne Kustermann Graf, Selinunte. Necropoli di Manicalunga. Le tombe della Contrada Gaggera [2002] 181 inv. nos. 113/0 952 and 953, pl. 57 [tomb 113]); Camarina (MonAnt 54 [1990] 25, pl. VIII [tomb 590.2]; 54, pl. XXVI [tomb 799.1-2]; and pl. LXXXIII [tombs 1222.5-6 and 1232.2, which are taken to be (imitative of) Corinthian lekythoi). 2002.97.0017.JPG
45.6.37 Conical mouth with a thick, slightly convex rim, merging into a short, tubular neck, from the top of which emerges a thick strap handle that loops down to the bottom of the shallow sloping shoulder; ovoid body; broad torus ring foot. 2010.98.0160.jpg
45.6.38 Stemmed. The bowl is shallow with a flat lip. 2003.31.0011.jpg
45.6.41 Shallow cup with thick rim, no handles, and a small foot. Flat resting surface and conical base. 2006.20.0166.jpg
45.6.66 Circular deep body with small lip leading to a large filling hole. At the centre of the reservoir is a central circular hollow which is no taller then the rim of the lamp and widens towards the base of the lamp. The nozzle is flat but at a slight incline, the tip of the nozzle is irregular, one side is rounded, the other is angular, the wick hole is oval. Base is a slightly concave ring with parallel circumferences. 2005.01.0072.jpg
45.6.67 Circular rounded body with a small amount of discus which inverts into the reservoir. The filling hole is large and circular. The nozzle is long and is slightly upturned with a small circular wick hole and a splayed, slightly rounded tip. Shallow foot, slightly concave. 2005.01.0300.jpg
45.6.68 Small circular body with convex shoulder and reservoir meeting at the widest point to form an angular girth. Large filling hole in the center of the body, encircled by a small depression of the discus. Nozzle is flat with slightly curved sides. The tip of the nozzle is flat with rounded, but unequal sides with an oval wick hole. Small shallow circular foot in the center of the body. 2005.01.0074.jpg
45.6.69 Restricted lateral ellipsoid body, long convex shoulder shallow lower body. Large filling hole in the center of the body. Beginnings of a flat nozzle with concave side and a circular wick tube. Moderate straight sided foot with concave base, leading to a 'kick' on the internal side of the base. 2005.01.0048.jpg
45.6.70 Circular shallow body with flat shoulder and a concave discus with small filling hole towards the right edge of the discus. Body shallower at the front end and the widest part of the body has a raised band around it. Short rounded nozzle and circular smoke hole. Vertical handle with a circular hole which runs down towards the base. Base demarcated but not raised and slightly off centre. There are two small shoulder lugs on opposing sides. 2005.01.0008.jpg
45.6.71 Circular body with a flat bad around the widest part. Slightly convex shoulder and a concave discus with a small irregular filling hole roughly in the centre. Short nozzle with a rounded tip and circular smoke hole. Vertical handle extends towards base and has a small hole. Base is demarcated but not raised. 2005.01.0010.jpg
45.9.2 Flat-lipped conical mouth, vertical strap handle rising from the bottom of the neck and reattached at the top of the 'ankle' on the body, which is in the shape of a left foot wearing a sandal. The base is a flat surface, separated from the sole by an incised line. 2011.98.0081.jpg
46.9.1 'Little lion' shape. Shallow, flaring mouth; thin neck from the top of which a single strap thin handle curves down to the flat shoulder; slight ridge between neck and shoulder; body tapers down to disk foot; base flat with central concave circle. Cf. Agora 12 part 2, no. 1115, pl. 38 2003.92.0149.jpg
47.10.3A-B Lid: tall, conical, flat-topped knob on a sharply sloping conical lid, with plain rim, vertical profile, flat underside, leading to a short flange (0.3) to sit within lekanis. Lekanis: slightly everted, rounded rim with flat lip, on a deep bowl with straight walls in two parts, separated by a sharp carination near the bottom, attached to a short disk foot, angled on inside and out, with a slightly convex underside. From either side of the rim extends a semicircular horizontal handle, round in section, that rises very slightly, flanked by short pointed spurs or lugs on either side of the handle. 2010.98.0012.jpg
47.2.10 Rounded, thickened, out turned rim, broader than base; convex wall descending directly to a flat base, grooved on the underside. 2008.10.0009.jpg
47.2.12 Rounded, slightly incurved rim; shallow convex upper wall divided by a reserved groove from a sharply concave wall that runs continuously down to the foot, although only a single curve is perceived on the interior. Short torus ring foot, with a narrow reserved resting surface and a reserved medallion at the centre of the underside, circumscribed by a concentric ridge. Convex-concave profile. 2008.98.0420.jpg
47.2.21 Bell, with a rounded lower edge, narrowing sharply and then tapering slowly to a rounded shoulder, where it is attached to a round knob, hollowed on one side, thickened on the other, pierced with a hole; there is another hole in the top of the bell, just below the hollowed part of the knob. A hand-modeled striking ball is attached, with a thin piece of jute string, knotted through the top hole and lowered through the bottom hole. 2010.99.0080.jpg
47.2.27 Cylindrical figure of a warrior. Pointed helmet, moulded face with long beard. Arms across chest, right carries shield, may have also held a spear, although now damaged. 2009.99.0109.jpg
47.2.3 Castulo cup: large stemless cup with inset lip. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising slightly over the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove. 2001.99.0135.jpg
47.2.5 Rounded thin rim, below which are attached two horizontal round handles, horseshoe-shaped; vertical wall curving into a shallow bowl, on a broad, flaring ring foot with a continuous concave interior surface from the underside through the resting surface. 2008.10.0013.jpg
47.2.6 Slightly flaring rim, flattened at the top, but sloping inwards; angled wall that curves sharply to a shallow bowl; horizontal, horseshoe-shaped strap handle, attached just below the rim and rising slightly above; broad torus ring foot. 2001.99.0123.jpg
47.2.7 Slightly flaring rim, flattened at the top, on an angled wall that curves sharply to a shallow bowl; horizontal strap handle, nearly triangular, attached just below the rim, rising slightly upwards; groove at the junction of body and broad ring foot, slightly convex at centre of underside. 2008.98.0404.jpg
47.2.8 Thickened, slightly everted rim, surmounts a wide shallow bowl; ring torus foot. 2001.99.0128.jpg
47.6.2A-B Powder pyxis (with slip-on lid); for another Sam Wide powder pyxis see London, British Museum E 814 (from Tanagra), showing Herakles at the fountain.T he lid is cylindrical with a plastic ring on the top. The body is conical and the base is a broad, disk-shaped, flat ring. 2007.01.0019.jpg
47.6.4 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in centre. 2008.99.0577.jpg
47.6.5 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in the centre. 2002.97.0491.jpg
47.7.1 Rounded rim, slightly outturned, below which are attached two horizontal round handles, u-shaped, slightly curving upwards; vertical wall curving into shallow bowl, on a broad, flaring ring foot with a convex underside. 2010.98.0265.jpg
47.7.3 Inside, embedded in earth is a small, unpainted jug. 2003.26.0008.jpg
47.8.1 Stemless (of a late type) 2005.88.0039.jpg
48.12.13 Short straight tapering neck; shoulder meets the body at a corner point; two small handles are attached to the upper body; the body is bulbous and has no foot. 2008.99.0242.jpg
48.12.2 Deep bowl (corresponds to FS [='Furumark Shape'] 285). The shape seems somewhat less deep than most published deep bowls. The best comparison to be found is in Mountjoy 1999, 1.189 Argolid no. 447, from Asine, House I, room 46. Bowl of pinkish fabric with flaring lipless rim, concave sides, tapering in lower part to a high ring base (is it conical?). Two horizontal round handles are attached to the side walls. 2003.98.0127.jpg
48.12.4 Broad, flat rim; short neck the length of which runs the handle with a hole for suspension; inverted oviod body; rounded base. 2003.92.0261.jpg
48.12.6 Disk-shaped mouth with flat rim; cylindrical neck; flat strap handle reaches from rim down to middle of shoulder; body is a slightly flattened ball, round on the bottom. 2003.97.0245.jpg
48.12.7 Flaring neck; upper part of body slopes sharply out to junction with bottom of single curved vertical circular handle. Widest part of body is towards base making a 'squat' shape. Flat base. 2003.97.0296.jpg
48.12.9 Projecting rounded rim with a lip that is flat on the upper surface; ribbed vertical strap handle extending 1/3 down the length of the vessel; slender neck widening to a cucumber shaped body. Flat concave base, the underside of which is outlined with a groove. 2008.99.0514.jpg
49.1.2 A slim alabastron with a small mouth and a projecting rim, an offset neck, lugs on either side of the body near the neck, and a raised three-stepped foot that is slightly concave on the underside. 2013.99.0040.jpg
49.12.1 Everted, nearly flat rim, with round lip, curves sharply to a cylindrical upper body, somewhat concave, separated from the lower body by a ridge above a flange. The lower body is comprised of four horizontal ribs, above a shallow bowl that narrows to a thin, short stem, that curves continuously into a conical foot, finishing with a broad groove above a rounded edge. The underside is hollowed. Two strap handles, which flare on either side, rise up above the rim and then descend to rejoin the body at the flange. A spur projects from the lower part of each handle, approximately in the middle of the upper body. 2008.98.0387.jpg
49.4.1 The mouth is conical, with a large aperture, the handle is banded and the foot is two-stepped and disk-shaped, with a small central concave dot underneath. 2005.88.0081.jpg
49.8.1 Unusual form; neck and body are identical to a shape 8M oinochoe (mug) in Boston, Museum of Fine Arts 22.632 (Padgett 1993, 211 no. 142, ill.), as if a fancier rim, handle, and lower part of the foot have been added to this piece. 2004.99.0026.jpg
49.8.2 The two-stepped handle has its upper part in the shape of echinus, while the lower part is a smaller, plastic ring. The body is conical and the rim is incurving. 2003.94.0065.jpg
49.8.5 Broad, flat rim; short strap handle; body shaped rather like a bombylios, with moulded rings; small ring foot; concave base. 2003.97.0247.jpg
49.8.9 Scale aryballos (pointed/piriform). The vessel has a flat, wide, disk-shaped rim, a banded handle and a slim, cylindrical neck. The body is ovaloid (inverted egg) and the base is ring-shaped.
50.10.1 Coldstream (79) classes this amphora as part of the 'plump and ungainly group' of LG IIb amphorae whose potters modelled amphora bodies after those of pitchers (see J.M. Cook, BSA 42, 151). Flaring mouth with rounded, thickened rim; two vertical strap thick handles extend from the top of the decorative zone on the neck down to the bottom of the decorative zone on the shoulder; rounded body tapers to a ring foot. Flat underside 2003.95.0091.jpg
50.10.2 Slightly everted lip with nearly flat rim, on a cylindrical bowl with concave sides, divided with a a sharp carination from a convex lower that smoothly curves into a short stem on a rounded foot ring, with rounded resting surface, tapering inner wall, and nearly flat underside. Two suspension holes are arranged horizontally just below the rim on one side. 2008.98.0344.jpg
50.10.3 Vertical sided, slightly outturned rim; ridge between rim and body; another ridge at top of stem; top part of stem channelled; stem broadens out into a wide foot; conical underside. 2004.76.0001.jpg
50.10.4 Cup mouth, a vertical, banded handle and a disk-shaped base. 2013.99.0031.jpg
50.12.13 Rim fragment from a cup. 2003.98.0108.jpg
50.12.24 Rim fragment of a deep cup 2003.98.0171.jpg
50.12.3 Fragment of a bowl with vertical handle. 2003.98.0221.jpg
50.12.30 Fragment of a cup 2003.98.0229.jpg
50.12.33 Fragment of a small jar, handmade, with broken stump of handle 2006.20.0154.jpg
50.12.39 Fragment of a closed shape 2003.98.0085.jpg
50.12.41 A slightly curved fragment of a large jar. 2003.98.0219.jpg
50.12.47 Fragment of cup with nearly straight sides (like a Corinthian skyphos) 2003.98.0177.jpg
50.3.2 Tall and slightly lopsided. Steep angled wall with a slightly everted rim and a ridge just below; two ridges at bottom of wall, including join with slightly sloping floor; another ridge marks the join with the cylindrical stem, slightly broadening at the bottom; two ridges mark the join with the trumpet-shaped base. Offset on interior at join of wall and floor. Base conical on underside. 2003.97.0304.jpg
50.4.10 Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside. 2008.99.0771.jpg
50.4.12 Castulo cup': large stemless cup. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove. 2001.99.0131.jpg
50.4.13 Attic type skyphos (cf. Agora 12, no. 341) except for plain underside, size (somewhat smaller than Attic examples), and perhaps breadth of handles. Rounded rim, below which are two horizontal round handles, horseshoe shaped. Walls continuously curve into a deep bowl, divided from the short torus ring foot by a groove. 2003.97.0646.jpg
50.4.14 Gill classes it as a kantharos of the 'Ampurias class'. Sessile kantharos with low handles. Sparkes 1968, 9, notes that the sessile kantharos with low handles is the most practical, albeit least elegant, of the fifth century kantharoi. Slightly outturned, rounded rim; tall, flaring wall, offset from shallow rounded bowl, divided from moulded ring foot by groove. Two vertical strap handles loop down from rim down to just above junction of wall and bowl. 2003.92.0162.jpg
50.4.16 Plain, rounded, thickened rim; shallow cup; ridge at junction of bowl and stem; tall stem curving continuously to the upper surface of the foot, which has a slightly concave outer surface, and rises to a small underside. Classed by Gill as a 'plain rim' type; he further notes 'Acrocup type foot and fillet'. 2003.92.0176.jpg
50.4.18 Nearly identical to a lidded mug excavated from the Pantanello Necropolis at Metaponto, published by Maria Elliott, in Carter 1998 2.643, fig. 14.2, 667 M3 (T 128-2): the Pantanello mug, which Elliott describes as an 'odd mug' and probably a local imitation of the late 5 c. Attic double handle mug (667), has a knotted handle which is otherwise similar to ours in contour and thickness. For less close comparanda cf. Morel 1981, type 5345a (citing examples from Capua and environs, e.g. CVA Capua 3, Italia 1312 no. 2: less squat, but similar); these Campanian examples are dated to ca. 300. Convex lip with rounded outturned rim, to which is joined a vertical strap handle, tripartite, with two projections on either side of the rim attachment. The handle loops and reattaches at the top of the bulging, ribbed body (ribbing visible on the interior). Tall angled ring foot, the interior of which has an incised spiral (not visible on exterior). 2010.98.0291.jpg
50.4.19 The shape is nearly identical to that of a smaller lekythos from the Pantanello Necropolis at Metaponto, published by M. Elliott in Carter 1998, 2.684-85 SL10 (T 128-3), although the ribbing is more akin to that found on Pantanello SL9 (T 126-9). Cf. also Sicilian examples from Agrigento (especially AG 1331: de Miro 1962, 137, fig. 41c). See also 'comments' below. 2003.37.0082.jpg
50.4.20 Outward facing lip on a rim folded into a grape leaf shape, shape continues down neck. Neck joins a plain convex shoulder. Tapering lower body joining slightly taurus foot with slightly concave base. Curved vertical handle attached to the lip and the shoulder 2005.02.0003.jpg
50.4.22 The bowl is a variant of Hoffmann's shape III (see H. Hoffmann, Tarentine Rhyta [Mainz 1966] 2) but the bowl is unusually aligned with the animal head. The Reading example corresponds to Hoffmann's 'main group' of Tarentine ram's-head rhyta, and particularly to his group E, which is 'the first wholly naturalistic representation of the ram-head', which he ascribes to the 'hand of Coroplast Beta' 2003.92.0308.jpg
50.4.23 Circular deep body with a small convex shoulder. Discus is concave with a small filing hole off centre and a small protruding nodule also off centre; this is probably the remains of a suspension lug. Long flat nozzle with a rounded tip and a large wick hole off centre at the end. Base is flat and demarcated with a line. 2005.01.0017.jpg
50.4.24 Shallow circular body with convex shoulder and a small concave discus; small filling hole at centre. Nozzle is short and has a flat surface at the tip into which a wick hole has been made, slightly off centre. Small vertical ring handle at the back of the lamp. Base is demarcated but flat. 2005.01.0054.jpg
50.4.25 Circular body, concave discus with a circular filling hole to the frontal left hand side. Flat nozzle with concave sides and single ended volutes, the tip is splayed and ends in an obtuse angle, the wick hole is circular. There is a base demarcated but not raised, the base is slightly concave. 2001.99.0018.jpg
50.4.5 Type 7a. Cut-away neck, with a vertical strap handle attached to the lowest part, rejoining the body at the bottom of the shoulder; cylindrical neck sharply joining sloping shoulder, which curves into the ovoid upper body, tapering into a cylindrical lower body; raised base; reserved on the interior, underside and resting surface. 2008.99.0569.jpg
50.4.8 Bell-shaped mouth with convex lip and high out-turned rim; tubular neck joined to ovoid body; short thick stem curving out to a carinated moulded foot, concave on the underside; vertical strap handle curves up from the middle of the neck and rejoins at the base of the shoulder. 2003.97.0814.jpg
50.5.1 Trefoil lipped oinochoe with rounded protrusions either side of neck-handle join. Single curved handle that reaches over into mouth, appears to have had an oblong pattern, and is flanked by moulded protrusions at the top and bottom. Wide neck with a groove at juncture with bulbous body. Ring foot reserved and base raised. 2006.20.0092.jpg
50.5.2 Large bell krater with a downturned rim, two recurved handles on the upper part of the body, lower body sloping to a thick stem and a molded pedestal foot. 2004.04.0004.jpg
50.5.5 Large krater with wide, downturned rim that extends sharply from the top of the body; two upcurving handles high on the body, which narrows to a short, cylindrical stem; hollowed pedestal foot, ridged just below the top of the foot. The resting surface is concave and the underside undulates smoothly up to the bottom of the bowl. 2004.04.0002.jpg
51.1.1 Flat outturned rim with rounded lip, sharply curving to nearly cylindrical bowl, slightly concave, which broadens and then tapers in the convex lower part to a disk foot, sloping on the upper part, rounded on the lower part, tapered on the interior, with flat resting surface and nearly flat underside. Just below the rim on one side are two holes for suspension. 2002.97.0233.jpg
51.1.2 The vertical handle is of ellipsoid cross-section with a banded back. The horizontal handles are riddled, circular and slightly curving upwards. The foot is conical, with a ring-shaped termination and the base has a concave, conical surface with an inflated semi-spherical central part. 2010.98.0180.jpg
51.1.3 Thick, wide rim with flat top, broad neck. Two rounded handles curve upwards from the top of the body to the neck, from the middle of which they continue in a broad, vertical strap handle to the rim. The body tapers into the narrower bottom and thick, wide base. 2005.88.0055.jpg
51.1.4 Slightly everted lip with rounded rim, on a deep plate that is convex at the upper part and then curves, with a near carination to become concave in the lower part, on a flat base that is beveled on the outer part. A single suspension hole is on the lip. 2004.02.0009.jpg
51.4.11 Moulded rim, grooved, with flat upper surface and sharp lip, on a short cylindrical neck, with attaches, at a ridge, to an ovoid body, attached below, also at a ridge, to a slightly flaring stand, with splaying foot, slightly ridged on upper edge, bevelled on exterior, hollow on the interior. From the shoulder, on either side, rises an m-shaped handle (half of one chipped off) with short projections in the middle. Three holes (to enable air flow) are drilled into the upper part of the stand, just below the join. 2002.97.0369.jpg
51.4.3 Fragment from a the rim (very little preserved), neck and body of a column krater. 2007.99.0095.jpg
51.4.5 Sack-like body with narrow mouth (missing, as is handle), broadening with slightly convex sides, and rounding gently to a flat base. 2004.06.0004.jpg
51.4.7 Fragment of a Little Master band cup 2003.97.0864.jpg
51.4.8 The rim is slightly flared and the neck is short; a strap vertical handle curves down from the rim to the shoulder; two smaller, round, horizontal handles protrude from the upper side of the rounded and pear shaped body; the foot is small and flaring; the base is convex
51.4.9 The rim is conical, strap small handle connecting the enck with the shoulder, is banded with an inflated back, shoulder curving slightly upwards, the body is ovaloid, tapering down to a torus foot, conical underneath. Cf. Agora 12 part 2, no. 1117, pl. 38 Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p43 shape class E, pl. 14 nos. 130.108 & 127.59 2013.99.0155.jpg
51.7.11 A large bell krater with a downturned, rounded rim, two recurved horizontal handles high on the body, the lower body sloping sharply to a thick stem, and a thick, molded, angled pedestal foot. 2010.99.0139.jpg
51.7.13 Small pseudo-panathenaic amphora with downturned rim (and skewed mouth), offset neck divided from the sloping shoulder by a ridge, vertical strap handles curving up from the bottom of the neck to the bottom of the shoulder, ovoid body tapering to a thick stem, and a curved pedestal foot that is highly concave on the interior. 2003.95.0062.jpg
51.7.15 A small mouth, with flaring lip, on a short concave stem, is joined smoothly to a ring aryballos, rectangular in section, approximating a sharp-edged donut, with beveled edges on the inside. A short strap handle rises slightly from the rim and curves smoothly to adhere to the exterior surface of the aryballos. Ure 57: 'Rectangular in section, as is normal in Boeotia'; cf. P.N. Ure, Hesperia 15 (1946) 45-50. Small mouth and handle. Angular shape with side and edge flat 2010.98.0234.jpg
51.7.16 Wide cup mouth with a reserved, flat rim. Two tripartite strap handles rise up from the neck and join the body at the shoulders. Ovoid body tapers to a thick disk foot, beneath a short (restored) stem. Base is concave 2001.99.0160.jpg
51.7.2 Lid: slightly convex top with circular groove (1.9 cm diam.) at the centre, overhanging a cylindrical body, with straight sides, terminating in a rounded rim at bottom. Pyxis: high cylindrical body with straight sides and simple rounded rim sits atop a flanged element, with rounded edges, that slopes sharply to a foot ring with tapered interior edge and rounded resting surface. 2003.92.0198.jpg
51.7.3 Flaring lip with rounded rim, sharply joined to ovoid body; single round, curved vertical handle rises up from alongside the lip and rejoins at the shoulder; lower part of body sharply joins to a short, flaring foot, concave on the underside, with a pointed underside. 2008.98.0370.jpg
51.7.5 Bell mouth, flaring at the rim, with a convex upper surface, offset from a narrow neck, broadening and curving sharply into the ovoid body; strap handle rises from the top of the neck and joins the lower part of the shoulder; molded ring base, divded into two concave parts, divied by a ridge at the middle; convex underside. 2008.99.0557.jpg
51.7.7 Sessile kantharos, traditionally thought to be an imitation of the 'Saint-Valentin' class of ceramics (Beazley 1947, 219), although Robinson 1997 now says that it is derived from a metallic prototype. Quite standard among its class (Xenon Group kantharoi) in shape (and decoration). Rounded outturned rim, below which are attached two vertical strap handles, rejoined at a slight ledge between upper body and lower body; upper body near cylindrical, whereas lower body is a deep bowl; low flaring ring-foot, ridged on the exterior, with concave face on the interior continuously curving through the resting surface. 2003.97.0936.jpg
52.3.4 Slightly convex, slanted, overhanging lip, rounded at the edge, on a slightly concave tapering rim, slightly offset from the lower bowl that curves sharply to a tall conical foot, rounded at the edge, with flat resting surface and a slightly convex underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs (handle and lugs broken off on one side). 2007.99.0153.jpg
53.8.1 Mesomphalos phiale with a thickened rounded lip, with a slight carination on the inside edge, with convex walls, sloping down to a flat plate, at the centre of which is an omphalos (raised central boss), decorated in relief all around. 2003.92.0274.jpg
53.8.2 Rounded rim; steep angled wall; slightly sloping floor continuously curving to the stemmed foot with a high trumpet-shaped base below moulding. Offset on interior at join of wall and floor. Base mostly flat but conical at the centre. Cf. Toronto, Royal Ontario Museum 918.3.72: Hayes 1984, 100 no. C67 (ill.) 2008.99.0710.jpg
53.8.3 Slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs. 2010.98.0024.jpg
55.1.1 Rounded outturned rim, narrowing to neck and broadening to baggy body, in a continuous curve down to the angled torus ring foot. Vertical ribbon handle, slightly grooved, loops from just below rim to the upper part of the body. 2008.98.0373.jpg
56.8.1 Rim is flat and the neck blends into shoulder. Body descends into a thin groove before a sloping foot. 2003.97.0946.jpg
56.8.2 Tall inslanting rim with plain round lip, sharply turning to a short shoulder that broadens to an ovoid body, which tapers to a tall moulded foot, comprised of a beveled top, two concave elements, a carination, below which a scotia above a torus. The resting surface is ridged and the underside consists of a pointed convex centre, within a tapering concave part. Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim. On either side of each handle is a pointed lug. 2002.97.0579.jpg
56.8.4 Shape 1; trefoil-lip joining at the back to a high curving vertical strap handle, which joins at the shoulder; ring base. 2003.59.0004.jpg
56.8.5 Conical, almost acorn shaped knob sits on rounded ring; lid curves down to a ridge; broad, flat edge 2003.92.0217.jpg
56.8.6 Rounded cup with sharply incurving rim and shallow bowl, on a short hollow stem which broadens to a disk foot with a grooved foot, and deeply concave underside. 2010.98.0102.jpg
56.8.8 The body is conical, widening towards the top. The rim has horizontal sides and a small lip at the top. The band handles are almost ellipsoid, with peaked terminations. Ribbon handles. The base is in the shape of an inverted echinus (a conical stand?). 2003.95.0104.jpg
57.3.11 Fragment of a female head from large figurine, hollow inside. 2003.98.0069.jpg
57.3.12 Head and part of body with right arm and hand of Atthis figurine, holding pan-pipes. He wears a Phrygian cap with long ear-pieces, long-sleeved tunic, and cloak. 2005.02.0076.jpg
57.3.14 Head of Atthis wearing a Phrygian cap, with top of cap bent over to left. 2005.02.0080.jpg
57.3.4 Flat piece, perhaps from the shoulder of a closed vase. 2004.12.0097.jpg
58.2.2 Sloping rim; thin neck; inverted pear-shaped body tapering to a small rounded foot. 2003.98.0080.jpg
58.2.4 Wide rim with bevelled lip. Long wide neck leading to a short and rounded body, base protrudes from body but has been damaged (during firing process ?). The handle attaches to the top of the body and then again at the join of the rim and the neck. There is a fork shaped spur which follows the curve of the handle and rim and then continues above the main body of the jug. 2003.92.0082.jpg
58.2.6 One-handled bowl. Rim is slightly concave. Handle is in wishbone shape. A deep well is in the centre, of a greatly smaller diameter than the rest of the bowl. For general shape cf. Sydney, Nicholson Museum 55.18 (Base-ring wheel-made Ware, Late Cypriot III). 2003.92.0112.jpg
59.2.7 Mummified head of a cat in a glass jar. Nearly cylindrical jar, tapering to base; wide mouth with straight sides.
59.6.1 Everted, concave rim, with round lip, offset by a carination from a shallow bowl, tapering sharply to a short stem that broadens to a moulded foot, concave in profile, with a nearly flat resting surface, grooved just within the resting surface, hollowed and conical within; a slightly incurving d-shaped handle rises up, on either side, from the centre of the bowl to the height of the kylix. 2010.98.0333.jpg
59.6.3 Single but ornate handle that has pointed oval at bottom, two moulded lines towards top and a piece that curves up separate to the main handle in a 'cobra-like' strike pose. The main piece of the handle extends along rim of vessel in a leaf-like shape with notches in the edges. Mouth is wide and has small rim. Outside body is marked with 4 pairs of incised bands around its sides. Small curve at side of foot. Base is flat but has 6 incised concentric circles and a central sunken dot.
60.1.1 Pagenstecher lekythos: cf. a more elaborate example from Lipari, 'scavo XXXV': Bernabo Brea and Cavalier 1997, fig. 108 (middle) 2003.99.0032.jpg
60.1.3 Stemless cup with a plain rounded rim. Two horizontal round handles, oblong in shape, incurved and rising over the rim. Handles rise from half-way down the shallow bowl, which is divided from spreading, lipped torus ring foot by a broad groove. 2003.94.0022.jpg
60.1.4A-B Pyxis: inverted rim slightly hanging over bulbous body; small, ring torus foot above a slight groove; convex underside Lid: Gently slopes up to stem and donut shaped knob. 2004.05.0002.jpg
60.8.2 Rim of the mouth is a little bit wonky, with a ridge on the flat top. Cylindrical short neck. Almost flat shoulder. A single rounded handle curves down to the shoulder from the rim, and two horizontal, horseshoe shaped handles emerge from the top of the body. Body tapers down to small torus foot 2002.97.0710.jpg
60.8.3A-B Lid: three tiered round knob with central, nearly conical well; short concave stem curving above and below into knob and lid; nearly flat lid tapering gently to a short vertical rim, rounded at both edges. The underside is slightly hollowed under the knob. Lekanis: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls, slightly carinated and narrowing, with convex lower portion, to a very short stem, on a rounded disk foot, with a flat resting surface, curved on the underside, with a rounded point at the centre. A wishbone handle rises from the top of the wall, on either side; a lug protrudes from either side of each handle. Ure 1960, 216 notes that what remains of the one handle indicates that it was pointed (wish-bone shaped) at the centre as well as rounded in section. 2010.98.0344.jpg
61.6.1.11 A solid, 'discus' shaped loomweight pierced at centre.
61.6.1.13 Fragment of a large jar. 2006.20.0160.jpg
61.6.1.2 Uneven rim; sloping sides form a conical shape; small well in bottom of interior; flat base. 2008.99.0474.jpg
61.6.1.4 Very uneven in shape. Surface left very rough. The lip is uneven, leading into a very open interior which is widest at the mouth. The body is rough, while the base is also roughly made with no smooth finish to the edges. 2008.99.0481.jpg
61.6.1.5 Small bowl with a thick, uneven rim, concave sides, and small base. 2003.92.0125.jpg
61.6.1.8 Ovaloid jug with a small mouth, a long neck flaring to a large body, and tapering again to a small, plain base; fat, rounded handle. 2003.92.0130.jpg
61.6.3 Everted lip with rounded rim, curving out to a short shoulder, then tapering to a conical, deep bowl, with short stem that broadens to a flat, disk foot, with tapering, slightly rounded exterior, gougedresting surface, slightly concave interior, and slightly convex underside. From either side, just below the rim, a u-shaped handle, round in section, rises up to just above the top of the rim. 2010.98.0338.jpg
61.6.4 Deep skyphos with thickened round rim, groove just below, straight walls of unusually deep body that narrows, with a sharp cuve at the bottom, to a short concave stem, and a thick disk foot, rounded on the exterior and angled on the interior, with a flat resting surface and a slightly concave underside. Two u-shaped handles, round in cross section, rise from the upper part of the body to the height of the rim. 2010.98.0213.jpg
61.6.5 Lid: Short button knob, with flat band, beveled interior edge, and slightly convex top, curving smoothly to a nearly flat underside that smoothly joins a short, slightly concave stem, that again smoothly joins a flat, tapering smoothly to a short vertical rim, rounded at both edges. The underside is hollowed under the knob. One-handler: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls curving into a convex lower portion then a very short stem, on a rounded disk foot, with a flat resting surface, beveled on the interior, and slightly convex on the underside. A single, recurved horizontal handle, round in section, rises above the rim. 2002.97.0677.jpg
62.10.1 Tall vertical rim, with plain round lip, that turns into a barrel-shaped body on a short, broad foot ring, with flat resting surface and underside, with exterior wall comprised of a slanting element above a rounded element, and interior wall slanted . Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim. 2008.98.0333.jpg
62.5.1 FS (='Furumark shape') 220. Shallow cup with flaring rounded rim, one vertical round handle, slightly concave sides that taper sharply below the handle to a raised base that is slightly concave on the underside. 2003.94.0035.jpg
64.7.1 Stemless (of a late type). Thin inturned rim; shallow bowl; one remaining rounded handle curves up slightly higher than the rim from just below the rim; round footring; flat underside with slight moulded circle on base. 2007.01.0170.jpg
65.6.1 The mouth is conical, the handle is of ellipsoid cross-section and the foot is disk-shaped. Cf. 'The Red and the Black: Studies in Greek pottery' by B. A. Sparks, 1996, p20 fig I:12 (see also 'Comments' field). 2003.95.0173.jpg
68.12.2 Short cylindrical knob, flat-topped and double-recessed in centre. The short concave stem connects the cylinder to the short domed lid, in a continuous curve. Beyond a gouge the outer 1.8 cm of the lid becomes slightly concave and after two ridges terminates in a slightly rounded edge.The underside is hollowed just below the knob, and has a short flange intended to sits inside the rim of the pyxis to which it would have belonged. 2002.97.0272.jpg
68.12.3 Pomegranate shaped knob, with small hole in the recess at the top, smoothly attached to a short stem, slightly concave, that spreads to a short domed lid, which in turn spreads to a flat rim with sharp beveled edge, slightly thicker underside, smoothly turned to a tapered flange with a rounded edge. Hollowed, round, smooth underside. 2008.99.0609.jpg
69.7.1 Foot-shaped aryballos; Dohan Morrow's Group II, 'network sandals' (Dohan Morrow 1985, 6-9) or Ducat's type B foot-shaped vases (Ducat 1966, 182-84). Foot-shaped aryballos with a broad rim, short vertical strap handle, squared, offset neck; the body of the vase in the shape of a left foot, including ankle, with relief decoration that gives the effect of a sandal enclosing it, and a flat, reserved base. 2005.88.0054.jpg
70.3.3 Ian McPhee describes it as a Kotyle rather than Skyphos type c (?). Tapering ring base, rounded at the bottom, from which the body rises in a sharp diagonal, curving sharply approximately at the halfway point, from which it rises near vertically and eventually flares slightly to a plain, rounded rim, just below which are attached two horse-shoe shaped handles, almost round in cross section. 2008.98.0449.jpg
71.12.4 Ornamental fibula (pin). Long straight pin with pointed end attached to semi-circular piece that thickens and flattens at the end. There is no hinge here but a curled piece joining the pin and the semi-circle acts as a hinge. 2004.95.0145.jpg
71.12.5 Long, thin strigil steeply curved. The handle is thicker at the front and thinner at the back where it bends over to form an oblong. The thinner piece is not attached to the body but curves back on itself and end is a flat circle. 2004.95.0150.jpg
71.12.6 Wide strigil curved in a tight arc. Handle is square and thinner on the back than the front as it bends over to make an oblong shape. The handle adjoins the strigil in a long triangular point with an incised line acting as a border. 2011.98.0027.jpg
71.6.1 Rectangular element with two protrusions to the side, from the lower part, and a molded satyr face in relief, which serves as a lug. 2002.97.0627.jpg
73.10.1 Tall knob, circular in section, flat at top except for a grooved section; knob which narrows then widens to a carination towards the bottom, and narrows again to the join with the concave lid. Flanged rim. 2005.89.0024.jpg
73.9.4 Fragment from near stem of a kylix. 2002.97.0214.jpg
76.6.1 Trefoil lipped. Oval shaped body with single handle from mouth to back, with a curled over section at end. Flat base. Small round neck. 2003.92.0227.jpg
77.5.1.1-17 Seventeen fragments from the same Nikosthenic amphora. 1) Should be rejoined to 2. Part of the body. There is white plaster on both surfaces . 2) Should be rejoined to 1. Part of the body. There are traces of plaster on both sides and adhesives. 3) Part of the body. White plaster and adhesives on both sides. 4) Part of the body. White plaster on both sides and adhesives. 5) Should be rejoined to 6. Part of the body. Adhesives. 6) Should be rejoined to 5. Part of the body. Exterior: There are areas that have been chipped off and few bits that have been pitted off. Interior: There is a layer of white plaster. 7) Could be rejoined to 8? Part of the body. There are bits that have been pitted off on the exterior and the interior is covered with plaster and adhesives. 8) Could be rejoined to 7? Part of the body. White plaster and adhesives on the interior and traces of plaster on the exterior, where there are also bits that have been pitted off. 9) Should be rejoined to 10. Part of the body. White plaster on both surfaces. 10) Should be rejoined to 9. Part of the body. The interior is covered with white plaster and there are traces of it on the exterior. 11) Should be rejoined to 12. Part of the body. The interior is covered with plaster and adhesives, while there are traces of plaster on the exterior, too. 12) Should be rejoined to 11. Part of the body. The interior is covered with plaster and adhesives, while there are traces of plaster on the exterior, too. 13) Should be rejoined to 14. Part of the neck. There are traces of white plaster on the interior. Many bits have been pitted off from boith surfaces. 14) Should be rejoined to 13 and 15. Part of the neck. There are traces of plaster and adhesives on both sides, as well as many bits that have been pitted off. 15) Should be rejoined to 14. Part of the neck. There are traces of white plaster on both surfaces, as well as adhesives. There are few scratches on the exterior and several bits that have been pitted off, especially from the interior. 16) Part of the body. Adhesives and traces of white plaster. There are areas on the exterior, where the colour appears to have been peeled off and some pitting off. 17) Bit of white plaster-part of rim? and covered with adhesives. 2005.91.0037.jpg
78.12.1 Deep circular body, almost flat shoulder, leading to a deep concave discus with two small holes, the frontal one is slightly off centre. Very small rounded nozzle with a large circular wick hole. Vertical handle opposite the nozzle, flat base with no delineation. 2008.99.0677.jpg
78.12.10 Circular body, flat moulded shoulder, small concave discus with a small filling in the front right hand side of the discus. Short flat nozzle, rounded tip with a slightly irregular wick hole that cuts into the shoulder area. Vertical handle which reaches down towards the base and attaches around the shoulder, circular piercing through handle. Circular unmarked base, slightly concave. 2005.01.0114.jpg
78.12.11 Circular body, flat moulded shoulder, small concave discus with a small off center filling hole. Short flat nozzle, rounded tip with a slightly irregular wick hole that cuts into the shoulder area. Vertical handle which reaches down towards the base and attaches around the shoulder. Circular delineated base, slightly concave. 2008.99.0049.jpg
78.12.12 Shallow circular body with large concave discus, filling hole is small and off centre on the discus. Medium nozzle has concave sided with a rounded tip, wick hole is circular and central at the end of the nozzle. Base is flat and delineated 2005.01.0110.jpg
78.12.13 Deep circular body , concave discus with a central filling hole. Medium, flat nozzle with concave sides, a splayed, rounded tip, large circular wick hole, just off centre. Flat circular delineated base. 2008.99.0245.jpg
78.12.14 Circular body with a gradual concave discus with a filling hole in the centre. Flat medium nozzle with concave sides and a rounded tip with a large circular wick hole in the centre. Small circular, unmarked base, very slightly concave. 2008.01.0057.jpg
78.12.15 Circular shallow body , small shoulder, concave discus with a small filling hole in the centre. Medium flat nozzle with concave sides and a rounded tip with circular wick hole in the centre. Circular delineated base, very slightly concave. 2008.99.0794.jpg
78.12.16 Deep circular body with a rounded shoulder terminating in a large filling hole. Long rounded nozzle titling slightly upwards, irregular rounded tip and an oval wick hole. Large splayed foot. Small vertical lug on the right hand side. 2008.99.0035.jpg
78.12.18 'Cocked hat' lamp, shallow open lamp fashioned from a bowl with two sides folded in to provide a wick rest. The rim is thick and very pronounced leading on to a vertical sided shallow reservoir. the base is flat but there is no foot. 2005.01.0281.jpg
78.12.19 Shallow ovoid body, convex shoulder with a small depressed discus; three small holes in the discus. Nozzle is joined into the body shape and has a rounded tip with a medium oval wick hole. Small vertical handle opposite the nozzle. Base is unmarked but slightly concave. 2008.99.0699.jpg
78.12.20 Circular body, concave discus with a mall circular filling hole in the front, right portion of the discus. Long flat nozzle, rounded tip with small circular which hole. Base is defined by a single band and is slightly concave. 2009.99.0093.jpg
78.12.21 Shallow circular body , small convex shoulder, concave discus with a small filling hole in the centre. Flat nozzle with concave sides, rounded tip and circular wick hole. Circular delineated base, slightly concave. 2008.01.0038.jpg
78.12.4 Shallow circular body (back deeper than the front), small convex shoulder, concave discus with a very small filling hole in the centre. Nozzle is flat with concave sides , a rounded tip and a circular wick hole that is just off centre. Base is demarcated and slightly concave. 2008.01.0050.jpg
78.12.5 Shallow circular body, slight shoulder leading to a large concave discus with a filling hole on the central axis, but further forward. Medium nozzle with concave sides leading to a rounded tip with a circular wick hole. Delineated base, slightly concave. Vertical band around the edge of the whole lamp, probably from joining. 2008.99.0037.jpg
78.12.6 Shallow circular body with slightly concave discus with small circular filling hole and a shallow circular base. Short flat nozzle with concave sides and a rounded tip, large circular wick hole. 2005.01.0289.jpg
78.12.7 Shallow circular body, small shoulder with concave discus with a small filling hole just off the centre of the discus. Medium nozzle, flat with concave sides, rounded tip and central circular wick hole. Base is unmarked, circular and slightly concave. Right hand stands slightly taller than the left. 2008.99.0808.jpg
78.12.8 Circular body, small convex shoulder with a slightly concave discus, two small holes on the discus, one on the central axis, the other just slightly off to the left. The nozzle is small and flat with a rounded tip and a circular wick hole, just off centre. Vertical handle extending towards the base at the back with a small hole though the centre. Demarcated base is flat except for a small depression. 2008.99.0064.jpg
78.12.9 Large, deep, circular body, small convex shoulder, concave discus with a small filling hole at the center. Medium flat nozzle (broken) concave sides with a small air hole at the base of the nozzle, the start of a rounded tip with a circular wick hole. Space for handle. Circular flat delineated base. 2005.01.0115.jpg
79.1.1 Deep Circular body, concave discus with a wide filling hole. Flat nozzle with an oval wick hole. Small pierced lug on the right hand side of the lamp. Circular foot. 2005.01.0055.jpg
79.1.10 Circular shallow body, concave discus with a small filling hole in the centre. Long flat nozzle with concave sided which meet the tip of the nozzle at an acute angle, the tip is rounded, large circular wick hole. Base is concave with a moulded ring. At the back are the remains of a handle. 2005.01.0087.jpg
79.1.12 Circular shallow body, concave discus with a small circular filling hole in the center. Small demarcated base, slightly concave. Long nozzle with concave sides and a rounded tip with a circular wick hole in the center of the tip. Two lines run down either side of the nozzle at the termination of volutes. 2005.01.0036.jpg
79.1.13 Large open lamp, deep circular body with a rounded open nozzle. Vertical ring handle at the back, small moulded ring foot. 2005.01.0063.jpg
79.1.14 large circular shape with a short rounded nozzle. Three bisected un-pierced lugs placed on the shoulder of the lamp equidistantly. The discus is sunken and there is a moulded rim to the discus which runs all the way around the wick hole in a continuous form. The wick hole and the filling hole are the same size and are in line with each other, there is also what appears to be an air hole in-between the channel of moulding. There is a ring base. 2005.01.0335.jpg
79.1.15 Fragment of a lamp handle, 2005.01.0091.jpg
79.1.16 Mainly circular body, nozzle is moulded with body disturbing the circular edge back half of body is deeper than the front. Shoulders are convex, discus is concave with a small circular filling hole in the centre. Long deep nozzle, sides follow smoothly on from the body, elongating the circular shape, slightly concave top marked with a ridge on either side, rounded tip and slightly irregular circular wick hole. Remains of small vertical handle attached to the shoulder. Small circular base, slightly concave not lineated. 2005.01.0042.jpg
79.1.17 'Bird-head' lamp, shallow body with one hole nearly at the centre of the discus. nozzle is flat with a splayed tip and concave sides, the smoke hole is circular and almost in the centre of the nozzle. the handle is transverse and has a hole in the centre. The holes all appear to be of the smae size and are all just of centre to the left. 2005.01.0321.jpg
79.1.18 Rough oval shape, very flat body with a flat discus and filling hole in the centre. There is no nozzle, just an elongation of the discus with a small circular wick hole. Circular ring base. 2005.01.0094.jpg
79.1.2 Deep circular body with a large circular filling hole in the centre of the discus. Flat long nozzle with a small circular wick hole and a rounded tip. Circular raised foot, slightly concave with a ring in the middle. "Kick" on the inside at the bottom of the reservoir. 2005.01.0024.jpg
79.1.3 Circular deep body with slightly concave discus, large filling hole and a shoulder lug on the right hand side. Flat nozzle, small oval wick hole. Shallow circular foot, slightly concave with a smaller circle within the foot. 2005.01.0342.jpg
79.1.4 Small Circular body with a convex shoulder and a small flat discus with a large filling hole. Small lug on right hand side with dent in the top, this however does not reach through to the bottom. Flat long nozzle, slightly concave sides with a splayed tip and an oval wick hole. Small circular concave foot. 2005.01.0057.jpg
79.1.5 Circular body with convex shoulder and a concave discus with small filling hole. Small raised protruding foot with flat base. Large vertical handle with one incised line along the length of it and a second band laying across the handle at the highest point, also with an incision along it. Long spout with irregular splayed tip, large oval wick hole. joining lines of the handle and the nozzle are apparent. 2005.01.0336.jpg
79.1.6 Circular body with slightly convex shoulder and a slightly concave discus, two holes of differing size are in the discus. The nozzle is small and rounded with an oval wick hole just off center. Vertical handle which reaches to the base which is demarcated with two concentric circles. 2005.01.0083.jpg
79.1.7 Shallow circular body. Flat nozzle with concave sides, large round wick hole and a rounded tip. Concave discus and wide ring base. Small filling hole, just off centre probably due to decoration. 2008.99.0765.jpg
79.1.8 Small circular body with a convex shoulder and a small concave discus with an irregular filling hole at the centre. Nozzle is slightly arched and splayed at the tip with concave edges and an obtuse tip. Wick hole is oval. base is a concave small demarcated circle with a circle within. 2005.01.0029.jpg
79.1.9 Deep circular body, small concave shoulder leading to large filling hole. Flat long nozzle with concave sides, a splayed tip and an irregular oval shaped wick hole. Large circular straight sided foot with a concave base. 2005.01.0085.jpg
80.7.1 Large lekanis with a slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs. 2010.98.0222.jpg
83.2.2 Wide at the bottom and short. At the top left long peice of terracotta extends outwards to a narrower point. To the right is the same apart from it has been broken. On top another peice of terracotta extends but again is broken. 2006.20.0531.jpg
83.9.26A-C Attic type A 2006.20.0922.jpg
83.9.27 Attic type A 2006.20.0933.jpg
83.9.28 Attic type A 2006.20.0916.jpg
E.2002.8.1 Pronounced thick lip, no neck, bulbous body tapering to a pointed base.
E.2003.9.1 Wide-mouthed jar, with a pointed base 2002.98.0036.jpg
E.23.14 Slate palette, flat and smooth in the shape of a birds head (?). More recognisable in the shape of a 'boomerang'. The palette thins towards the edges. Hole in the arc for suspension. Edges are not sharp but curved. 2006.20.0111.jpg
E.23.16 Fish shaped, handle is tail, mouth is detailed, possibly a detailed eye, and a whole at the top edge for threading, but this could also be a whale's breathing hole(?). Possibly used for rubing malachite for eye make up.
E.23.20 Tall jar with a wide mouth, long neck and small flat base. 2002.98.0026.jpg
E.23.22 Tumbler shaped cup, mouth is wide with no neck. Tapering to a pronounced, flat step-like foot. 2006.20.0100.jpg
E.23.23 Pear shaped jar with a pronounced lip, short neck, and pointed base, widest point has a ridge which is uneven. 2002.98.0182.jpg
E.23.26 Everted lip attached to long straight neck, shallow but wide upper body. Lower body gently tapers to an everted foot with a concave base. Handle attaches to just below the top of the neck and rejoins the body at the widest point of the body. 2007.01.0059.jpg
E.23.27 Broad shouldered jar with thin lip, broad neck, and body that tapers down to a conoidic foot which is slightly raised from the rest of the body. 2002.98.0190.jpg
E.23.29 Fragment which takes the shape of cylinder that flares to a flat base with inscription. It is thought that objects like this were part of the facade of 18th Dynasty Theban tomb chapels. Inscriptions on objects of this type normally include the name and title of owner, although the hieroglyphs on this piece are confused. 2007.01.0076.jpg
E.23.30 Squat, gourd-like in shape with handle. Neck is long, the handle attaches to the top of the shoulder, follows the handle upwards for a centimetre and the bends back to reattach on the upper body. The body is spherical in shape, tapering to a small disc base.
E.23.31 Pronounced lip, short neck, rotund body which tapers to a flat base. 2002.98.0176.jpg
E.23.32 Undulating lip, long neck, bulbous shoulder tapering to a pointed base. Two opposing handles emerge on the sholder just below the band decoration. 2002.98.0198.jpg
E.23.34 Seated figurine of Horus on a solid square base. Horus' two arms run parallel to the thighs and the feet; his plaited side lock over his right shoulder denotes childhood. The base has a short nodule attached to the back of it. 2008.08.0072.jpg
E.23.38 Coffin lid ornament: backbone of Osiris. The object is a cross shape. The horizontal piece of the cross is a square with three horizontal lines carved across it. This is placed about nine-tenths of the way up the vertical piece. Just below the horizontal square are three finer carved lines. 2002.98.0077.jpg
E.23.42.1-4 Group of four red beads, unattached but found together. Two are long and thin, one is a shallow but complete circle and the fourth is an incomplete circle and thick.
E.23.45 Small tweezers with a loop on one end, originally loose in the hinge for hanging. Tweezers are made from three pieces, a central straight but shorter section and two longer but curved inwards sections which would have been the pieces that would have bent together to hold the hair or splinter.
E.23.46 Lightweight hair ring comprised of a circle that is incomplete, to allow hair to be put into the ring. The top and bottom slope into the central hole and the body widens so there is a ridge around centre.
E.23.47.1 A string of random beads placed together. The string consists of two Horus amulets, two lotus petal amulets, two scaraboid amulets, several single beads of circular shapes, one shell, one broken unidentifiable amulet and one cylindrical bead. 2002.98.0232.jpg
E.23.60 A long necklace comprising of hundred of very small shell beads. 2002.98.0235.jpg
E.47.1 Circular body with small sunken discus with small filing hole, large raised sholder. Long flat nozzle with a splayed end and a curved tip and oval smoke hole. Small ring base. 2005.01.0328.jpg
E.47.6.9 Undulating pie-crust mouth (probably hand molded). The body is globular and the base is rounded, with a small part flattened. The base presents the finger marks of the potter. It seems to have been suspended by a string around the neck (attached). 2002.98.0031.jpg
E.62.15 Curved rim fragment, probably from a bowl 2006.20.0687.jpg
E.62.17 Stone scarab. The beetle is sat on a flat base. The upper body is flat. The antenna and 'head' of the beetle are also detailed. 2002.98.0982.jpg
E.62.19 Hammer shaped handle with a slit where the mirror sat in the top. The top parts are curved over. The handle is rounded and wider at the end.
E.62.20 Possibly for holding a small jar. DSCN0183.jpg
E.62.30 Small vase, with pronounced lip and neck. Shoulders are widest point tapering to a flat base. 2002.98.0174.jpg
E.62.40 Three pieces. Lid is circular and flat with a central knob handle, also circular. Second piece is the ring which sits between lid and base and is circular with a central hole cut out and a rim on the underside so it sits in the base. Base is wide at shoulder and tapers to the bottom with smooth walls. At top is a slighlty raised rim to receive ring. Inside is a hollowed out cylinder, not to the contours of the outer wall. 2002.98.0008.jpg
E.62.44 Lid is oval with a central circular knob and traces of an incised band on top. (Lid is missing!) Body has a flat rim, same shape and size as lid so they sit together, but with a central circular opening. Thin neck leading to shoulders. Four oblong feet at each 'corner' and the base between is flat. Flat rim on top of body is reserved. The inside is a cylindrical well, not matching the contours or shape of the outside. Heavy object.
E.62.46 Flat and thin blade with a nail through to both sides, perhaps for attaching a wooden handle. The blade is pointed at one end then widens in a triangle then thins again but not to a point.
E.62.47 This could be part of a pot as the top of the fragment appears to form a lip and the fragment ins curved. 2002.98.0165.jpg
E.62.48 The fragment is wider at the top than the bottom and there is a cylindrical hole that goes right through the object. 2007.01.0070.jpg
E.62.5 Smooth pin, round and tapering to a point.
E.62.50 The mouth is wide with no neck. The body is bulbous tapering to a flat base. 2002.98.0172.jpg
E.62.55 There is no neck and the body tapers to a flat base. The two handles are directly opposite one another on the mouth. 2002.98.0151.jpg
E.62.56 Poppy flask, with a fat body, long bottle neck with spreading lip, large handle. Two moulded rings round neck at junction with handle. Foot conical. Cf. Sydney, Nicholson 52.412, from Abydos (Base-ring I Ware) 2003.92.0135.jpg
E.62.61 Small vase, probably for make-up purposes. Pronounced flat lip, no neck, flaring to a flat base. 2002.98.0155.jpg
E.62.8 Deep sided bowl with curved sides and no significant base meaning bowl is slightly unsteady. There are two incised bands on the outer surface around the rim and a more significant ridge on the inside where bronze has been folded over to make a smooth and safe edge. 2005.88.0070.jpg
E.62.9 Rectangular in shape with a wide back tapering to teeth. Teeth are short and narrow and there are 22 plus two larger side pieces, one either end.
E.63.10 Miniature papyrus sceptre worn as a pendant (suspension hole at top). Zig zags taper to the main body the top of which is decorated with four incised lines. The body swells and then tapers to a pointed base. 2002.98.0952.jpg
E.63.15 The god Horus seated, with plaited side lock and finger on his chin. The figure is completely naked. A uraeus adorns the head. The feet of the figure are attached to a solid, square copper base. 2007.01.0108.jpg
E.63.18 Portion of a slight oval, cylindrical handle of a sistrum/mirror. 2008.08.0161.jpg
E.63.19 A triangular prism attached to a cylindrical shaft. The shaft is flattened in one part. 2002.98.0166.jpg
E.63.20 Triangular prism attached to a cylinder of flattened bronze.
E.63.21 Flat lanceolate with a ridge down the center on each side.
E.63.22 Tri-ridged arrow with concave areas between ridges. Attached to a cylindrical shaft.
E.63.24 Wide necked jar with a large lip and a small neck. 2006.20.0091.jpg
E.63.27 A small lip tapering to a narrow mouth. The neck is long leading straight down to globular body the widest point of which is the shoulder. The body tapers to a flat base. 2002.98.0169.jpg
E.63.28 The lip is narrow, no neck and a weak shoulder. The body flares to the widest point in the lower half of the jar just above the foot. The widest point tapers to the foot, which is approximately 1cm in height with a flat base. 2002.98.0180.jpg
E.63.6 Small blue figure of the god Ptah (Specifically Ptah-Sokar, a combination of the creator god Ptah and the falcon headed god of the dead Sokar). The ponytail of the figure is looped in such a way that it would enable threading. The figure is squat and is naked aside from some neck decoration and a loin cloth. The figure stands on a flat oval base. 2007.99.0065.jpg
E.65.1 Wide flaring lip with rounded rim, narrowing to a short neck, broadening to an ovoid body, with a pointed base. 2002.98.0045.jpg
E.65.10 Mirror is very flat; not perfectly round but still circular with a small rectangular section where the mirror would sit into the wooden handle. 2007.01.0179.jpg
E.65.11 Not perfectly round but still circular. Widest from side to side. Has a rectangular extension at base so that the object would have sat in the handle. Flat and thin with slightly sloped edges to avoid making them sharp. 2008.08.0044.jpg
E.65.6 Long, thin ornament from a coffin lid: the centre appears to have a kind of knot carved into it with three ridges on either side of this. 2002.98.0076.jpg
L.2011.1.10 Circular pot fragment, maybe a knob, broken at the junction with the lid. 2011.97.0114.jpg
L.2011.1.12 Concave shape, maybe a bowl of a vessel, with a concave underside. 2011.97.0165.jpg
L.2011.1.13 Central circular knob, with a round tip and a sort of carination in the edge, hollow in the underneath; rounded rim, hollow inside, connected to the knob by a quite sloping lid. 2011.97.0183.jpg
L.2011.1.14 Round. Slightly convex surface, with a central stem protruding in the middle of the inner part, with a wider slightly convex tip. 2011.97.0195.jpg
L.2011.1.22 Stem of a glass vessel, with a ridge at the junction of the stem with the foot. The stem narrows in its middle part. The bowl seems to be wide, with a flat bottom. 2011.97.0128.jpg
L.2011.1.26 Fragmented neck with remnants of a handle. Bulbous neck, wider near the outturned rim. 2011.97.0177.jpg
L.2011.1.38 Front fragment of a lamp, with part of the central discus with filling-hole, part of the shoulders and nozzle. General shape rounded. 2011.97.0274.jpg
L.2011.1.4 Lamp fragment, with a shoulder and one handle. Quite circular shape. The handle is narrower on the top, and it has a triangular section. 2011.97.0350.jpg
L.2011.1.41 Fragment of one body and of central discus. On the edge of the body a hand-grip. 2011.97.0297.jpg
L.2011.1.44 Fragment of shoulder with a hand-grip, and of central discus. 2011.97.0278.jpg
L.2011.1.46 Flat circular knob, with a circular dip in the centre of the tip. In the underneath small flange. 2011.97.0339.jpg
L.2011.1.48 Deneuve type VIIA or B. Circular shape, with a small handle. 2011.97.0370.jpg
L.2011.1.49 Lid fragment, with a flat circular knob, a cylindrical stem, and steep lid. 2011.97.0382.jpg
L.2011.1.50 Fragment of body of a vessel, with a part of rim, rounded. On the lower part, the body slightly narrows, with a slight carination. Fragment of a big open vessel. 2011.96.0080.jpg
L.2011.1.51 Fragment of rim and one handle, evidence of the connection of the second handle. Vertical short handle with the right side more protruding, extended from the lower part of the rim to the shoulder. Short cylindrical neck, flaring in a quite horizontal shoulder. 2011.97.0332.jpg
L.2011.1.57 Rhomboidal shape (lozenge), single unit of a floor or wall covering. 2011.97.0058.jpg
L.2011.1.71 Fragment of a glass cylindrical stem, that narrows in the upper part, at the junction with the bowl, clearly separated. 2011.97.0151.jpg
L.2016.3.10 Miniature dimension. Round, outwards bulged ceramic disc, with very slightly everted, rounded rim and a moulded face at centre of the exterior. A small curved handle, running in a straight line, is attached to the rim and ends at the back side of the left forehead area and the right chin area.
L.2016.3.13 Bronze figurine of a dog or cow, with geometric body shape: Elongated back/belly, pin-like legs (standing wide apart), short pointy muzzle, slightly outwards pointed ears or horns, downwards sloping tail.
L.2016.3.14 Female dancer, slightly turned to her left in a likewise slight step position. Her right arm slopes down, her left arm is raised and she is looking to her left hand, which is bent backwards. A hole in mentioned hand gives rise to the suspicion that she is holding an (missing) object. There is another hole at her left heel.
L.2016.3.16 Characteristic wedge-shaped lithic flake with one short and two long sides, linked with a rounded edge. Triangular elevated dorsal surface and flat ventral surface.
L.2016.3.23 Almost pyramidal, very coarsely worked artifact, not symmetrical. The 'underside' slightly tapers to a point.
L.2016.3.31 Ceramic figure of a camel, with raised head and straight posture. He is slightly craning his straightened head upwards, so that his broad neck is a little bent backwards. His eyes appear to be triangular but the iris is round. The mouth is slightly open. The saddle is just schematically depicted with a broad band surrounding the humps, both slightly tapering; the back hump is bent to the left, the front hump to the right. The tail leads down closed to his left leg. His legs are long and thin. There is a hole at the bottom of his rounded belly.
L.2016.3.32 Small, relatively heavy metal horn; hollow inside. Moulded bulges line up along the curved body, probably to sketch the natural form, and lead to the rounded tip. Four holes surround the upper part of the horn (actually the end attached to the head). The horn ends with a flat rim.
L.2016.3.7 Heavy Alabaster lid with slightly uneven rounded knob, which leads to a short stem. The stem curves into the diagonal lid with rounded rim and short, broad flange, slightly narrowing to its bottom. The underside is concave at centre.
L.2016.3.9 Base fragment of a flat bowl, with a part of the ring-shaped foot.
REDMG:1926.99.50 Flaring broad lip, quite short, above a short neck which curves into a globular body, round bottomed. 2004.99.0952.jpg
REDMG:1926.99.52 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to an ovaloid body with rounded base; small round vertical handle is tucked in under the overhanging lip. 2004.99.0909.jpg
REDMG:1926.99.54 Chimney mouth (missing), offset slightly from a tall cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap handle arches up from just below the mouth and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, with a profile that is slightly convex; the slightly concave underside has a conical indentation at centre. 2003.93.0391.jpg
REDMG:1926.99.59 Flaring rim , with flat lip, narrowing to a nearly cylindrical body (slightly concave) that tapers sharply at the base, to a low conical foot with concave underside. No lid. 2004.99.0776.jpg
REDMG:1934.26.1 Small cup with rounded rim on a flaring lip that sharply joins a shallow bowl with bulging profile; two horizontal round handles, canted up, join at the broadest part of the bowl. The bowl has almost no stem but attaches directly to a raised ring base with diagonal profile, slightly convex resting surface, and slightly pointed underside. 2004.99.0896.jpg
REDMG:1934.51.8 Nearly conical shallow bowl, with a slightly incurving rounded rim, slightly convex side walls, and a thick, small foot, with straight sides on the exterior, tapered on the interior; pointed underside. For shape cf. CVA France 6 (Ensenere) pl. 22 and Lamboglia (Atti di I congr. Intrem di Studi Liguri (1950) 39, forma 26. 2004.99.0795.jpg
REDMG:1934.53.4 Broad flaring lip, convex on the upper surface, with a downturned rim, offset from a concave shallow bowl; hollow high stem offset from plate but spreading at the bottom into a disk foot, hollowed on the interior. 2004.99.0437.jpg
REDMG:1934.53.5 Belly-handled jar. High outturned rim narrowing to a short neck; ovoid body, in the centre of which are attached two vertical round handles, canted; flat base, slightly concave. Cf. larger examples of this shape are in Toronto, Royal Ontario Museum 918.3.77 (Hayes 1984, 47, no. B29, ill.) and Orvieto, Querce inv. 398 (Camporeale 1970, 126 no. 136, fig. 59, pl. 32b). 2005.89.0032.jpg
REDMG:1935.87.1 Trefoil mouth at the back of which is attached an angular strap handle, that rises slightly and then descends sharply to join the lower shoulder; long neck that broadens gradually to a piriform body; short ring foot with rounded profile, flat resting surface, diagonal inside wall, and slightly convex underside. 2005.99.0060.jpg
REDMG:1935.87.11 The base is raised to provide a foot on which to support the weight of the cup.
REDMG:1935.87.15 Plain rim with flat lip, just below which is attached a horseshoe shaped horizontal handle, slightly canted and rising to just above the rim;.flattened hemispherical body attached to a ring foot, rounded on the outer surface, with a flat resting surface, and curved interior wall, offset from pointed underside. 2003.93.0012.jpg
REDMG:1935.87.18A Trefoil-lipped oinochoe with lid tricorn lid (RM.87.35.18B). Wide-bodied, with a tall curved handle, trefoil mouth, and tricorn lid. Body contracting to foot-ring. Cf. Payne NC fig. 10 A-H, esp G. 2003.93.0247.jpg
REDMG:1935.87.21 Broad projecting rim with flat lip, narrow cylindrical neck, sloping shoulders curving into an ovoid body, narrowing to a flat base; flat strap handle extends from the rim to the bottom of the shoulder.
REDMG:1935.87.25 Rounded rim on everted, slightly overhanging lip that curves into a short, broad neck; two vertical strap handles rise up from the neck and rejoin at the shoulder; smooth join to barrel-shaped body; short ring foot, concave on the underside by convex at the centre. 2005.89.0068.jpg
REDMG:1935.87.29 Stemless. Two handles, one either side from well below the rim are bent up at the ends. Shallow body descending to a groove and then a rounded footring.
REDMG:1935.87.30 Mouth has a rim that slopes downwards. Concave sides with two small lug handles, each placed ca. 1.5 cm below rim ; carination and further concave element near flat base.
REDMG:1935.87.32 Column krater. The handles have two bars of a cylindrical cross-section and adjoin in a square at the rim, having side-surfaces above the bars. The foot is in the shape of an inverted echinus, a cylindrical stand widening towards the bottom. There is also a plastic ring just below the lowest part of the body. 2005.89.0042.jpg
REDMG:1935.87.35 Female head with melon coiffure, broken off a stone statuette of a woman.
REDMG:1935.87.6 Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards, to which spurs are attached on either side. The lower body is offset from the handle zone, rounded in the lower part where it sharply joins a moulded foot, with groove above a spreading upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface, and a pointed, slightly offset underside.
REDMG:1942.5.6.1 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to a globular body with rounded base; flat strap handle falls directly from the rim to the middle of the shoulder. 2003.97.0031.jpg
REDMG:1942.5.6.2 Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
REDMG:1947.13.1 Large pseudo-panathenaic amphora with a cup-shaped mouth terminating in an outturned rim; offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original). 2003.93.0004.jpg
REDMG:1950.25.1 Type 8B oinochoe. Wide mouth with rounded, slightly overhanging rim flaring out from a broad neck, attached sharply to the top of the barrel-shaped body, with a moulded ring foot, with a vertical upper part and a grooved, slightly broadening lower part; narrow, flat resting surface; slightly concave underside. Two-piece handle, knotted at the top, splays at the attachment to the rim. 2003.93.0334.jpg
REDMG:1951.130.1 Oinochoe with trefoil lip. Broad neck, widening into grooved trefoil lip, from the back of which extends a vertical tripartite strap handle that reattaches at the middle of the shoulder; broad ridge at the bottom of the neck to which is attached the ovoid body, tapering to a broad ring base, convex on the exterior, with a flat resting surface. 2004.99.0353.jpg
REDMG:1951.131.1 Slim alabastron with narrow mouth, projecting rim, slightly convex on the upper surface, and beveled at the edge, flat on the underside; tall, slightly concave neck, offset from a tall ovoid body, with two small lug handles on the upper 1/4 of the body; molded pedestal foot is comprised of a tapering upper element broadening into a disk foot, with a diagonal outer surface, with three ridges, a flat resting surface, and a conical indentation on the underside. 2003.94.0080.jpg
REDMG:1951.132.1 Guttus type askos: swelling rounded body with bearing at the top a large relief medallion (frontal female mask with puffed cheeks and a lock of hair knotted over the forehead) offset and raised from the body; at a distance of ca. 0.5 cm are two incised lines beyond which the body is covered with fine vertical fluting down to its midpoint. A long diagonal spout with slightly concave sides rises obliquely from the shoulder below the medallion, and terminates in a three-stepped flanged mouth. A loop handle (semicircular in cross section) rises from the shoulder at a right angle to the spout. A tall thick foot, offset from the body, with a ridge at the halfway point broadens toward a ring base, slightly rounded on the exterior, with a concave underside offset from a concave element within the narrow resting surface. The foot is particularly tall, and is ridged in the middle: otherwise in shape this askos corresponds to Morel's type 8141h 1 (Morel 1981, pl. 209). 2004.99.0752.jpg
REDMG:1951.133.1 Shallow ellipsoid bowl with rounded rim, underneath which are attached two horizontal round sections, curving up above the rim, rectangular in shape, and bent in at the tops. Deep angled ring foot, with a narrow, rounded resting surface, convex on the interior vertical surface, and flat on the underside.
REDMG:1951.134.1 Plain rounded rim, body nearly vertical at top and curving into a deep bowl, which narrows to a short stem attached to a disk foot with a rounded resting surface, small underside pointed at centre. Two horseshoe-shaped horizontal round handles, attached slightly below the rim. 2004.99.0768.jpg
REDMG:1951.135.1-2 Pyxis: Flanged rim widening to sharply curved shoulder, rounded below, and tapering to a flat base; round horizontal handles on either side pressed up against rim to form lugs. Lid: cylindrical knob attached to a disk. 2004.99.0432.jpg
REDMG:1951.136.1 Moulded knob, topped by an offset beveled element with inset circle on upper surface; concave stem curves into a diagonal lid, with a slightly incurving lip, with a rounded rim. 2004.99.0633.jpg
REDMG:1951.137.1 Moulded knob, topped by beveled element with inset circle on upper surface; concave stem, attached to a nearly flat lid, with a moulded flange on the underside, slightly concave at centre. 2004.73.0004.jpg
REDMG:1951.138.1 Moulded rounded (‘mushroom’) knob, topped by beveled disk with inset circle, conical indentation on upper surface, surrounded by a groove; cylindrical stem offset from a to a slightly diagonal lid, with a moulded flange on the underside, concave at centre.
REDMG:1951.139.1 Moulded knob, topped by a slightly rounded element with inset circle and conical indentation, on upper surface; lower part of knob curves into a nearly cylindrical stem offset from a diagonal lid, with a tapered lip, with a plain rim. 2004.99.0643.jpg
REDMG:1951.140.1 Broad rim, slightly convex on upper surface, ridged at the outside edge, with overhanging lip; neck, concave in profile, broadens to a nearly flat shoulder that curves sharply to an ovoid body, which narrows sharply at the bottom, where it is joined to a moulded pedestal foot with a splayed base and concave underside; upper part of foot has tapering straight sides; the profile of the base is decorated with two ridges. Two incurving horizontal handles, round in sectiona, are attached to the upper third of the body; a vertical handle, also round in section, emerges from the top of the neck and curves down to the lower part of the shoulder. 2004.99.0808.jpg
REDMG:1951.141 Flaring rounded rim with flat lip, narrowing to a funnel-shaped body that curves sharply in the lower part to a broad stem that flares into a molded pedestal base, with a slanted exterior, ridged on the upper part, and a concave underside, pointed at the centre; two incurving horizontal round handles are attached just above the centre of the body.
REDMG:1951.142.1 Trefoil mouth attached at the back to a small strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy, bulbous body; broad, angled ring foot, rounded at the bottom, thin resting surface, slightly convex on underside. 2004.99.0702.jpg
REDMG:1951.143.1 Trefoil mouth at the back of which is attached a nearly L-shaped strap handle, that begins above the height of the mouth and descends to join the lower shoulder; short neck broadening to a piriform body, ribbed below the shoulder under shortly above the foot; short ring foot with flat resting surface, diagonal inside wall, and slightly convex underside. 2001.99.0005.jpg
REDMG:1951.144.1 Central well, surrounded by a ridge, rising to broad rim with overhanging vertical lip, tapering slightly in; on the underside the plate curves to a short, thick stem that broadens to a moulded foot, concave and flaring on the exterior surface, hollowed on the interior, with a flat resting surface, pointed at centre of plate. 2005.99.0120.jpg
REDMG:1951.147.1 Tall cylindrical neck offset from a squat body, with a curved shoulder, flange below the shoulder, concave side walls (offset at top and bottom), and a broader ring base, curved on the upper surface, with a broad resting surface, offset, slightly concave underside. From the front of the neck extends diagonally a tubular spout, squared at the end. From the back of the spout rises a high curving strap handle, rounded on the outside, which arches in a rectangular form, and descends sharply towards the lower part of the shoulder; which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. Two moulded male heads, bearded, are found on either side of the upper handle attachment. 2005.99.0048.jpg
REDMG:1951.148 Broad rim with slightly convex, tapering upper surface, and overhanging concave lip; rim joins on either side with diagonal spurs at top of round columnar handles (two either side), which descend at a slight diagonal to the shoulder. Broad neck, slightly concave, attached sharply to short curving shoulder from which an ovoid body descends and tapers to the foot. 2003.93.0266.jpg
REDMG:1951.150.1 Flaring rim, curving continuously from the exterior, with an overhanging, convex lip, curving on the underside into a short, thick neck that broadens to a baggy body, sharply joined to a broad pedestal foot, flat on the upper surface, convex on the vertical surface, and hollowed slightly interior, with a cyma molding leading up to a flat underside.The triple-ridged strap handles rise up from the sides of the neck and rejoin at the shoulders. 2005.99.0161.jpg
REDMG:1951.151.1 According to Trendall and Cambitoglou, RFVA 1.278.149, this is a special lekythos shape. Cup mouth, slightly flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the bulbous squat body; short ring base, rounded in profile, with narrow, flat resting surface and recessed underside; strap handle rises from the upper part of the shoulder, along the side of the neck and curves to rejoins at the lowest part of the shoulder.
REDMG:1951.152 Moulded grooved rim, with a flat overhanging lip, atop a thin, nearly cylindrical neck, attached to an ovoid body, ridged at the top; raised base, with thin reseting surface and slightly pointed underside.
REDMG:1951.153.1 Askos in the shape of a duck, with an everted rounded rim on a short cylindrical neck, from the back of which rises a strap handle that curves down to join the vase just above the tail. 2005.90.0025.jpg
REDMG:1951.154 Flaring flat, broad lip with convex upper surface and and concave lower surface, curving into a cylindrical neck; vertical ribbon handle emerges from the rim and rejoins the bottom of the neck at a bulge, below which is a conical body, with a rounded base, and a slight conical indentation at the bottom. 2005.99.0098.jpg
REDMG:1951.155 Flaring broad lip with flat upper surface, tapering rim, and concave lower surface; pinched neck to which is attached a small lug handle, with a suspension hole; neck broadens to a baggy, ovoid body, with a rounded base. 2005.99.0095.jpg
REDMG:1951.156.1 Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem. 2004.07.0008.jpg
REDMG:1951.157.1 Cup mouth, flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the squat, high shouldered body, from which it is offset; tall but narrow ring base with rounded resting surface and slightly convex underside; strap handle rises from the side of the neck and rejoins at the lowest part of the shoulder.
REDMG:1951.158.1 Trefoil mouth attached at the back to a small, ridged strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy body; broad ring foot, squared in section, with a thin resting surface, slightly convex on underside. 2004.99.0782.jpg
REDMG:1951.159.1 Large pseudo-panathenaic amphora with an offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original). 2005.89.0030.jpg
REDMG:1951.160.1 Large krater with everted mouth and downturned rim, two recurved horizontal round handles attached to the upper part of the cylindrical body, which narrows to ashort, broad stem that curves into a pedestal foot, with a recessed band above slightly tapering sides, hollowed within. 2003.95.0072.jpg
REDMG:1951.161.1 Overhanging everted lip with rounded rim curves sharply a near cylindrical body, narrowing to a tapering stem, which in turn is joined to a hollowed, moulded pedestal base;.the upper surface of the base is nearly flat, surrounded by a ridge and then a groove from which the nearly vertical sides descend; two incurving round horizontal handles are attached just above the middle of the body. 2005.90.0006.jpg
REDMG:1951.1707 Everted rounded rim, from the back of which extends a round vertical handle that reaches to the middle of the biconical body with a flat, rough base. 2004.99.0402.jpg
REDMG:1951.1708 Everted rounded rim, from the back of which rises a round vertical handle that joins the body at the middle of the slightly baggy body with a flat, rough base.
REDMG:1951.1714 Rounded, slightly everted rim on slightly concave lip, slightly convex lower walls curve into a short foot, with a flat base.
REDMG:1951.1715 Rounded rim on incurving lip, curves into a top heavy bowl, with nearly straight, diagonal sides, above a short foot, flat on the underside; rounded interior. 2008.99.0268.jpg
REDMG:1951.1716 Rounded rim on incurving lip, curves into a top heavy bowl, with a slight carination in the lower third, beneath which the walls become slightly concave, above a flat base; rounded interior. 2008.99.0264.jpg
REDMG:1951.1717 Rounded rim on incurving lip, curves into a top heavy bowl; walls become slightly concave just above the flat base; rounded interior. 2008.99.0262.jpg
REDMG:1951.1718 Rounded rim on incurving lip, curves into a top heavy bowl that becomes slightly concave above the flat base; rounded interior. 2008.99.0257.jpg
REDMG:1953.25.1 Type B, formerly known as 'glaux' variety. Slightly incurved rim, below which is attached a one side a round horseshoe-shaped handle, canted slightly up to the level of the rim, and on the other side a ridged strap handle that rejoins just above the middle of the body; convex side walls; torus ring foot with slightly convex underside. 2004.99.0612.jpg
REDMG:1953.25.103 Moulded female figurine with extended arms, wearing headdress. Flat, roughly worked back. Arm position suggests she may have been a singer, forming parts of a ring and is now broken from her base. 2007.12.0056.jpg
REDMG:1953.25.13 Globular oinochoe of Archaic shape. Trefoil lip attached at the back to a broad strap handle, high swung and descending vertically to the middle of the shoulder; slight step at top of shoulder, below sharp join with cylindrical neck; squat body; broad, angled ring foot, with flat resting surface; slightly convex underside.
REDMG:1953.25.14 Trefoil mouth attached at the back to a high swung strap handle that reattaches near the bottom of the shoulder; short cylindrical neck with a ridge marking the join with the high-shouldered, squat, rounded body; broad, angled ring foot, slightly concave on underside. For large trefoil oinochoai see Corinth 13, 130-32 fig. 14
REDMG:1953.25.15 Trefoil lip attached at the the back to a broad, high curved strap handle that curves in slightly to the middle of the shoulder; short cylindrical neck joining stepped shoulder in a continuous curve; globular body curves into a short ring foot with diagonal resting surface and slightly concave underside.
REDMG:1953.25.16 Trefoil mouth at the back of which is attached a hook-shaped round handle that begins above the height of the mouth and turns back to join the shoulder, with a slight spur; short neck curving into a baggy body in a continuous curve; short ring foot with narrow, rounded resting surface, diagonal inside wall, and pointed underside. Handle attachment is indicative of the Dotted Spray Group 2005.99.0090.jpg
REDMG:1953.25.188 Draped adult (perhaps man) holding a baby. 2003.93.0108.jpg
REDMG:1953.25.19 Trefoil lid with a small knob.
REDMG:1953.25.2 Rounded, slightly everted rim, below which are attached two horizontal handles, rounded on the outsides and slightly flattened on the insides, slightly canted and rising above the rim. Body bulges slightly below handles but otherwise tapers gradually to a thick raised base, which is slightly broader than the lowest part of the body. The underside is circumscribed with a lightly gouged band. 2005.99.0144.jpg
REDMG:1953.25.22 Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, slightly flaring at the shoulder, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, comprised of a scotia above a torus; the flat base has a conical indentation at centre. 2005.99.0074.jpg
REDMG:1953.25.23 Chimney mouth (missing), offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, with a profile that is concave above convex; the flat base has a conical indentation at centre. 2005.99.0080.jpg
REDMG:1953.25.25 Tall cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap handle rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering gently towards the base, which is attached to a moulded pedestal foot, tapering down, with a profile that is slightly convex; the underside has a conical indentation at centre. 2003.93.0393.jpg
REDMG:1953.25.26 Cup mouth with flat lip, slightly offset from narrow neck, which broadens to a nearly flat shoulder; thin strap handle rises from under the cup mouth and rejoins at the lower part of the shoulder; below carination is a conical body, with concave side walls, tapering down, and straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside. 2003.93.0394.jpg
REDMG:1953.25.27 Narrow cylindrical neck, broadens to a nearly flat shoulder; thin strap handle rises from the top of the neck and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside. 2005.99.0085.jpg
REDMG:1953.25.28 Narrow neck (mostly missing), broadens to a nearly flat shoulder; thin strap handle broadens and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then curving in to a short stem, attached to a small pedestal foot with a raised base; small nipple at the centre of the underside. 2003.93.0396.jpg
REDMG:1953.25.29 Narrow neck (mostly missing) broadens to a nearly flat shoulder; thin strap handle broadens and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then curving sharply into a short stem, attached to a small pedestal foot, tapering down, with a slightly raised base; small nipple at the centre of the underside. 2001.99.0095.jpg
REDMG:1953.25.30 White-ground lekythos, group iii. Conical mouth with flat rim, slightly offset from cylindrical neck which curves sharply into nearly diagonal shoulder; vertical strap handle (missing) reached from top of neck to bottom of the shoulder, below which a carination marks the join with the straight body that tapers down to a high, molded, pedestal foot, grooved at the top of the slightly convex vertical surface, concave on the underside, with a nipple at the centre.
REDMG:1953.25.32 Kalathos-shaped body, with a flaring rounded rim, to the top of which are attached the looped ends of a pair of strap handles, concave on their exterior surfaces; the tubular ends of the loops rejoin the middle of each handle, and below the bottom of each handle, attached at the bottom of the cup, is a spur. Below a carination, the bottom of the cup narrows to a nearly cylindrical stem, ridged at the center, below which it widens, and smoothly curves into the top of a moulded foot, with three ridges, of increasing diameter, on the exterior surface. Within the narrow resting surface is a concave underside, with a conical hollow at centre. 2005.89.0006.jpg
REDMG:1953.25.33 Central well, surrounded by a ridge and groove; walls rising to broad rim, just beyond a groove on the upper surface, with overhanging vertical lip, tapering slightly out; on the underside the plate is slightly convex and joins a short, thick, angled ring foot, with a tapering resting surface and a slightly convex, pointed underside. 2005.89.0008.jpg
REDMG:1953.25.34 The vessel presents a rounded belly with a very narrow neck, which ends in a flat rim with a inner lip that would prevent the liquid from falling. 2005.02.0007.jpg
REDMG:1953.25.35 Chimney mouth, bell-shaped, flaring at the top, with a broad rim, convex on the upper surface, and sloping in; the mouth is offset from a short neck that broadens toward the barrel-shaped body, from which it is also offset; thick disk foot, rounded in profile, with a thin resting surface, concave on the underside, pointed at centre; strap handle (missing) rose from the side of the neck and rejoined at the lowest part of the shoulder. 2001.99.0036.jpg
REDMG:1953.25.36 Flaring rim, with a flat lip on the upper surface, at the top of a tall neck with concave sides, alongside which is attached and rises a small strap handle (lopsided) that rejoins at the middle of the shoulder; sharply joins barrel-shaped body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside. 2003.93.0321.jpg
REDMG:1953.25.38 Lekanis: slightly everted rim with diagonal flange, curves in to a shallow bowl; two flanged ribbon handles, attached horizontally just below rim; pronounced ring foot with vertical sides and raised underside. Lid: Moulded knob with deep circular depression; in centre of sloping lid, which steps down with three fasciae and then a convex lower part decorated with two incised bands; rounded rim. 2003.93.0102.jpg
REDMG:1953.25.39 Flanged rim and tapering body, to which are attached broad horizontal strap handles (rounded but almost oblong in shape), slightly canted upwards, with spurs on either side. The lower body is offset from the handle zone, rounded in the lower part where it attached to thick stem broadening to a moulded foot, with spreading upper part, slightly concave, and a broader, rounded lower part, broadening towards the base, with a conical depression on the interior, and a narrow resting surface 2005.99.0148.jpg
REDMG:1953.25.40 Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards. The body is rounded in the lower part and sharply joins a moulded foot, with an angled upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface. 2003.97.0324.jpg
REDMG:1953.25.41 Flanged rim and tapering body, to which are attached horizontal triangular strap handles, slightly canted upwards. The body narrows sharply to short stem, slightly offset from the top of a moulded foot, with a vertical exterior surface and a conical indentation on the underside, and a narrow resting surface. 2003.93.0327.jpg
REDMG:1953.25.43 Broad projecting rim with slightly convex lip; short narrow neck curving into a globular body with rounded base; flat strap handle extends from the rim to the middle of the shoulder.
REDMG:1953.25.44 Flaring rim, with concave profile, joining bulging body at a carination, below which are attached two u-shaped horizontal handles, rounded in section, canted slightly up; below handles body curves sharply towards stem, broken off. 2004.99.0501.jpg
REDMG:1953.25.45 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
REDMG:1953.25.46 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot. 2004.99.0629.jpg
REDMG:1953.25.47 Rounded everted rim on concave lip, below which are attached two horizontal round handles, oblong in shape, canted and slightly incurved, rising to just below the rim; deep bowl joins a spreading, lipped torus ring foot with a sloping resting surface.
REDMG:1953.25.48 Deep round mouth with concave lip, slightly overhanging, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled ring foot. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
REDMG:1953.25.49 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the middle of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base.
REDMG:1953.25.5 Plain rim below which are attached two horizontal round handles; concave sides tapering down to a narrow, angled ring foot with convex resting surface. Semi-glazed skyphos, type ii: see Corinth 13, 125 fig. 13 2003.97.0216.jpg
REDMG:1953.25.50 Deep round mouth with concave lip, slightly overhanging attached to a high swung vertical ribbed handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled foot, with a flat base. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134. 2004.95.0163.jpg
REDMG:1953.25.51 Upturned rim, slightly offset from the neck, which is cylindrical and nearly straight, joining an ovoid body, slightly baggy, supported by a broad ring base. Vertical strap handle, grooved, extends horizontally from the rim and curves back into the body, which it joins in the upper part.
REDMG:1953.25.52 Wide mouth with slightly concave lip, and a ridge from which descends a moulded, overhanging rim, which broadens. The rim is concave on the underside and curves into a broad neck that broadens to a piriform body. The vertical strap handle emerges from the rim and descends sharply to the bottom of the shoulder. The raised base is flat on the underside. 2004.99.0216.jpg
REDMG:1953.25.53 Incurving rim with concave lip, narrowing to a short neck at the top of which is attached a small vertical strap handle that extends the the shoulder; wall curves continuously from neck, widening to an ovoid body atop a disk foot; underside concave with a slight circular protruberance at centre. Tapering 'cucumber', survival of the Late Corinthian Archaic type (see Corinth 13, 140-41, fig. 15), but with a disk foot. E.g. Corinth T1317: Corinth 13, 222 no. 277-4, pl. 37. Cf. also Rhitsona 50.273. 2002.97.0005.JPG
REDMG:1953.25.54 Wide-mouthed mug. Rounded outturned rim, narrowing at the neck and broadening to a baggy body, in a continuous curve down to the thick torus ring foot, with a thin resting surface, diagonal element, and offset underside; a vertical loop ribbon handle is tucked in just below the rim where it adjoins the upper half of the body.
REDMG:1953.25.55 Wide flaring mouth with rounded rim; short neck narrowing to sharp join to an ovoid body that tapers sharply at the bottom to a flat base; grooved just above the base. Two-piece strap handle splays at the attachment to the rim and rejoins the shoulder (for handle cf. RM.1950.25, which is, however, knotted). 2003.93.0301.jpg
REDMG:1953.25.57 Cup mouth with slighted everted, rounded rim, concave lip, narrows to neck, which flares to a top-heavy body; round vertical extends horizontally from the rim and descends in slight s-curve to the shoulder; slightly raised base with flat underside, worked with spiral pattern grooved in.
REDMG:1953.25.59 Deep round mouth with rounded rim, concave, slightly overhanging lip, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge at the attachment to the globular body, slightly flattened, and a low, sharply angled foot with a flat base.Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
REDMG:1953.25.60 Round mouth with slightly flaring lip from which extends a short vertical ribbed handle that reattaches at the middle of the shoulder; short, thin neck, which curves out sharply to a nearly flat shoulder that broadens to a squat, rounded body; wide vertical ribbing on widest part of body; short, angled foot, with slightly concave base.
REDMG:1953.25.61 Moulded mouth, flares to tall rim, which narrows to a tall, cylindrical neck; neck curves gently into a sloping shoulder, grooved near the join to the body, which broadens slightly and then tapers, with slightly concave sides, to a slightly raised base, grooved on the resting surface, flat on the sunken underside. 2004.99.0164.jpg
REDMG:1953.25.62 Broad mouth with thickened downturned rim. Slender neck sloping to a nearly horizontal shoulder, from which emerge two lug handles, just below a moulded band; finely ribbed body that tapers to a short raised base.
REDMG:1953.25.64 Narrow neck, nearly flat shoulder, curving to a broad body, tapering slightly down, to a slightly raised base, concave at the centre; two pinched triangular round handles rise from the edge of the shoulder, on opposite sides of the bottle. 2003.93.0227.jpg
REDMG:1953.25.65 Flaring broad lip with flat upper surface and a short rim curving into a cylindrical neck above a moulded ring, from which descends the conical body, narrowing slightly to a flat base, with a slightly bevelled edge.
REDMG:1953.25.66 Two thin vertical strap handles arch up from the top of a cylindrical neck, slightly offset at the bottom, and rejoin at the middle of a sloping shoulder; shoulder curves sharply into a conical body, slightly rounded at the bottom where it joins a short stem flaring to a disk foot, hollowed at the bottom. 2003.93.0355.jpg
REDMG:1953.25.67 Nearly flat lid, with rounded rim, curving into a deep thin flange, whereby lid would have sat probably within the pyxis; button knob at centre.
REDMG:1953.25.68 Sloping lid above slightly tapered flange with a rounded rim; flat-topped knob, with sloping sides, at centre. 2003.93.0323.jpg
REDMG:1953.25.69-70 Moulded knob, topped by an offset beveled element with inset circle on upper surface, with a two-part profile, convex on the upper part; concave stem curves into a diagonal lid, with a slightly incurving convex lip that terminates in a rounded rim. 2007.02.0002.jpg
REDMG:1953.25.72 Round uneven rim, lopsided diagonal walls, and a flat base; rough and bumpy on interior of bowl and base. 2004.99.0101.jpg
REDMG:1953.25.73 Round uneven rim, slightly incurving, lopsided tapering walls, convex at top and concave at bottom, and a flat base; rough and bumpy on upper part of interior walls. 2004.99.0095.jpg
REDMG:1953.25.75 Incurving rounded rim; interior surface curves smoothly; exterior upper part offset from a lower concave element, curving out at the bottom to flat base, marked by a ridge on the exterior; nipple surrounded by a grooved circle at centre of underside. 2005.99.0110.jpg
REDMG:1953.25.77 Large circular, deep body, flat shoulder, slightly raised, concave discus with a small filling hole in the centre. the beginnings of two nozzles, both sided are concave with large decorative features protruding from either side. Base of handle remains with half of the hole left. Ring base, slightly concave. 2005.01.0270.jpg
REDMG:1953.25.78 Circular shallow body, concave shoulder leading to a large filling hole. Beginnings of a band handle. Wide shallow nozzle tilts slightly upwards, large oval wick hole. flat unlimited base. 2003.93.0127.jpg
REDMG:1953.25.79 Small Circular body, convex shoulder, rim of large central filling hole is concave. Large slightly raised nozzle, rounded tip with a large oval wick hole, slightly irregular underside to nozzle. Small straight sided circular foot with a flat base. Slight anomaly at the bottom of the reservoir in the centre. 2005.01.0248.jpg
REDMG:1953.25.9 Corinthian type skyphos. Rounded incurved rim below which emerge two horizontal round handles, rising slightly; tall, thin-walled body bulges at top and tapers sharply to a flaring ring foot with a concave resting surface and raised underside.
REDMG:1953.41.1 Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, slightly incurving. A short stem, slightly concave, attaches the bowl to a thick disk foot, convex on the underside (a continuation of the rounded resting surface) but hollowed through the middle of the stem. 2005.99.0133.jpg
REDMG:1958.111.1 Slightly flaring cup mouth, with a slightly convex upper surface; strap handle (lopsided) rises from the top of the neck and rejoins at the middle of the shoulder; cylindrical neck, broadening at the bottom, offset from the globular body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside. 2004.99.0928.jpg
REDMG:1958.112.1 Cup mouth with flat rim, tall cylindrical neck, slightly widening at the top, curving into a diagonal shoulder, below which (from a carination) the body tapers slightly, and then curves sharply to join a tall moulded base, with straight sides, slightly concave on the underside, with a cylindrical depression; a vertical strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination. 2004.99.0934.jpg
REDMG:1958.113.1 Ovoid aryballos, with a rounded mouth (now broken), small round vertical handle reaching from just below the mouth to the bottom of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, bossed on the underside.
REDMG:1958.117.1 Rounded, slightly incurving rim, which which rise (at slight angles) two high swung strap handles, rejoined at the bottom of the bowl in a continuous curve with the bottom of the bowl; between the handles, the bottom of the bowl is set off from the side walls. A flaring, broad ring foot is convex on the interior; the underside of the bowl is slightly convex. On the interior, the bottom of the bowl is offset from the side walls at a sharp carination. 2004.99.0885.jpg
REDMG:1958.19.1 Jug with tall narrow tapering neck, beak spout, and bulbous body. Vertical strap handle joins the base of the neck near the spout and a thrid where the neck and body are joined.
REDMG:1958.23.1 Wide body that tapers at the bottom towards a slightly convex base. The rounded base forces the jug to lean to one side. The tall narrow neck has an everted rim. Single, wide flat strap handle joins the base of the rim and the shoulder.
REDMG:1958.33.1 Jug with bulbous body with delineated flat base. Single strap handle joins the upper body to the centre of the long neck with a funnel-shaped mouth ending with an everted rim.
REDMG:1958.52.1 Cocked-hat lamp with a low body, wide rim, and slightly uneven base.
REDMG:1961.150.2 Slightly flaring body with a rounded base. Tall narrow neck and beak spout. Base is uneven and therefore the vessel leans to one side.
REDMG:1961.150.3 Spreading lip above long cylindrical neck, decorated with a moulded ring at the junction with the thin rounded vertical handle, which arches and rejoins at the broadest part of the biconical body; conical foot. Lopsided. 2004.99.0982.jpg
REDMG:1961.150.4 Hemispherical bowl, slightly indented at base, to which is attached a triangular handle with two prongs at the top. 2004.99.0856.jpg
REDMG:1961.199.1 Very narrow neck, from which loops up a small, narrow strap handle, which rejoins at the middle of the broad shoulder. The shoulder curves into a bulbous body, grooved just above a slightly raised base. The underside is slightly concave at its centre. Some circular ridges (comb ot wire marks) remain on the underside. 2004.99.0879.jpg
REDMG:1961.199.3 Continuously curving sides: flaring rim, rounded on the upper surface, broad cylindrical neck, nearly diagonal shoulders, ovoid body narrowing to a pinched stem, flaring base, flat (although rough and thus unstable) on the underside.
REDMG:1962.184.33.21 Cup mouth on cylindrical neck, slightly narrowing and then curving to a slightly diagonal shoulder; narrow strap handle extends from the middle of the neck to the bottom of the shoulder, just above a carination, from which descends the nearly straight side walls; body narrow sharply at the bottom to a short stem attached to a tall moulded base, which tapers down. 2004.99.0872.jpg
REDMG:1964.1154.1 Outturned rounded rim , narrowing to a nearly cylindrical body (broadens slightly below) that narrows sharply to a short, nearly cylindrical stem, attached to a pedestal foot, hollow within, slightly angled on the upper surface, nearly vertical on the sides, flaring to a slighted everted base, with a rounded resting surface 2004.99.0831.jpg
REDMG:1964.1601 Circular deep body with small shallow nozzle which is slightly up turned at the tip. Large oval wick hole, filing hole is wide and circular, there is no discus. Ribbon handle around the back of the lamp, attaching to the shoulder in two places. Small, slightly uneven foot with a flat base slighitly carrinated. 2003.93.0124.jpg
REDMG:1964.1603.1 Circular deep body with lower body wider than the upper. Flat , slightly concave rim to a large circular filling hole. nozzle is long and flat with small oval wick hole at the tip and a small depression at the end of the tip. Base is flat and circular, wheel or wire marks still exist on the base. Band handle is attached across the back of the lamp. 2005.01.0199.jpg
REDMG:1964.1604.1 Circular body with small convex shoulder leading to a large circular filling hole. Nozzle is straight sided with a slightly dipped tip, level top and a oval wick hole. Handle was a horizontal band handle around the back. Base is circular, large and has a very slight depression. 2005.01.0200.jpg
REDMG:1964.1605.1 Small Circular body, convex shoulder, rim of large central filling hole is concave. Large flat nozzle, rounded tip with a large oval wick hole. Small slightly splayed circular foot. Slight anomaly at the bottom of the reservoir. 2003.93.0130.jpg
REDMG:1964.1606 Small circular body with wick hole almost in the shoulder, just protruding slightly to form a lip. Large circular filling hole, small oval wick hole. raised circular foot with rough edge. At the bottom of the reservoir is a lump, probably from the patrix ? 2005.01.0324.jpg
REDMG:1964.1607.1 Very small almost circular body, convex shoulder with large circular filling hole. Nozzle affects the circular shape of the body, almost forming a lip to the lamp, oval wick hole is pierced though lip and shoulder. Large circular foot, base is unturned and has wire cutting marks. Small kick in the base of the interior. 2005.01.0137.jpg
REDMG:1964.1608.1 Small circular body, convex shoulder, concave rim leading to a large circular, central filling hole. Flat long nozzle with slightly down-turned oval wick hole and a rounded tip. Small circular strait sided foot with flat base. 2005.01.0205.jpg
REDMG:1964.1610.1 Ovoid body, convex shoulder, medium rounded filling hole in the centre at the highest point. Nozzle is part of the body and is the most acute angle, elongated oval wick hole piercing the body. Irregular flat lateral pinched handle, base is a slightly raised ring mirroring the ovoid shape of the body. 2003.93.0118.jpg
REDMG:1964.1612.1 Main body; circular with long nozzle, low girth, rim of large circular filling hole is stepped down from the shoulder. Nozzle is smooth and cylindrical with one side deeper than the other. Large circular, high vertical handle attached to the shoulder opposite the nozzle. Small slightly of centre foot is circular and has a concave base. Kick on the interior of the base.
REDMG:1964.1613.1 Circular shallow body with rounded convex shoulder leading to a concave discus with two small filling/air holes along a central axis. Nozzle is of an average length with a rounded wick hole. large un-pierced pinched vertical handle, small circular, slightly concave demarcated base. 2005.01.0262.jpg
REDMG:1964.1614.1 Deep circular body, nearly straight convex shoulder and a deep concave discus with a small filling hole at the centre. Nozzle was flat and had a small round wick hole and probably a rounded tip. high vertical handle reaching down towards the base, circular piercing through the handle. Circular base is demarcated with a single line and is very slightly concave. 2005.01.0193.jpg
REDMG:1964.1615.1 Circular deep body, convex shoulder, small circular concave discus with reasonably large central filling hole. Small rounded nozzle with a medium sized flat, circular wick hole, at base of nozzle there appears to be a small air hole. Flat vertical handle with circular piercing through it. Handle is high above the body and reaches down towards the base. Base is circular and flat, it is delineated by two moulded bands. 2005.01.0139.jpg
REDMG:1964.1617.1 Circular shallow body, concave shoulder with large circular filling hole. Flat, slightly upward tilting nozzle narrowing towards the rounded tip; large oval wick hole. Beginnings of a band handle. Base not outlined, very slightly concave. 2003.93.0169.jpg
REDMG:1964.1618.1 Main body; circular with long nozzle, low girth, rim of large circular filling hole is stepped down from the shoulder. Nozzle has concave sides, tip is splayed, large oval wick hole. Large circular, high vertical handle attached to the shoulder opposite the nozzle. Small foot is circular and has a concave base very small kick on the interior of the base.
REDMG:1964.1619.1 Rough oval shape, straight sides, slightly upward sloping shoulder, raised rim that runs from the wick hole, around an almost circular discus area and then returns to the wick hole, this rim forms a slight rim for the wick hole too. In the centre of the discus area is small filing hole, the nozzle is deep and in the same form as the body with a large wick hole. Small circular ring base with slight depression. Lamp leans towards the left on the base. 2003.93.0121.jpg
REDMG:1964.1620 Small, squat variant of the Classical round-mouthed oinochoe, type B. Round mouth, slightly concave lip, from which extends a short vertical strap handle that reconnects at the bottom of the shoulder; narrow neck, sloping shoulder, sharply curving to a hemispherical body; high ring foot, slightly angled. 2004.99.0251.jpg
REDMG:1964.1621 Wide mouth with moulded, slightly concave lip, and slightly everted rim, below which the short vertical strap handle emerges, bends, and descends to the shoulder. Globular body attached to an angled ring foot. Shape similar to Corinthian round-mouthed oinochoe, type B (cf. Corinth 13, fig. 14), but with a slightly concave lip, and more globular than Corinth T1712: Corinth 13, 228 no. 296-2, pl. 41. 2008.99.0225.jpg
REDMG:1964.1622 Cup mouth with rounded rim, narrowing to a short neck, at the top of which is attached a small vertical strap handle that extends the lower part of the shoulder; wall curves continuously from neck, broadening to a slim ovoid body joined to a broad raised foot that is diagonal in profile; flat underside. 2004.99.0150.jpg
REDMG:1964.1624 Short, baggy oinochoe with pinched, flaring trefoil lip from the back of which rose a (high swung) vertical strap handle, broad neck and a globular body, slightly elongated at the back where the handle reattaches; rounded base. 2004.99.0139.jpg
REDMG:1964.1625 Trefoil lip, attached to a short neck curving smoothly into a squat, baggy, body; high curving strap handle reaches from back of lip to middle of body; slightly raised base with flat underside. 2004.99.0126.jpg
REDMG:1964.1626 Trefoil mouth attached at the back to a high-swung vertical handle (missing) that reattached at the bottom of the diagonal shoulder; below carination, body bulges and then tapers to a flat base, slightly concave on the underside. For tall trefoil oinochoai see Corinth 13, 131 fig. 14, 133, e.g. Corinth T1298-99: Corinth 13, 312 nos. D 49-f-g, pl. 57. 2004.99.0156.jpg
REDMG:1964.1628 Plain rim below which are attached two horizontal round handles; concave sides tapering down to a narrow, angled ring foot, concave on underside, with circular protruberance. 2003.93.0115.jpg
REDMG:1964.1630 Very small kotyle, with rounded rim, convex sides tapering to a short disk foot, with a flat underside; two triangular round handles attached vertically, just below the rim and rising slightly, just above the height of the body.
REDMG:1964.1631 Very thin walls, with rounded rim, just below which are attached horizontal handles. Walls slightly concave, divided from a spreading, lipped torus ring foot, with a pointed resting surface, by a pair of grooves. This example corresponds to Ure's Class II.C skyphos, particularly (ii) which includes reddish-purple bands just below the level of the handles, perhaps a band at the bottom of the body where it joins the ring foot, and concentric purple bands on the underside (or plain black or reserved undersides). See Ure 1927, 24.
REDMG:1964.1632.1 Deep skyphos. Thin rim, slightly averted, below which u-shaped round horizontal handles are attached, and rise slightly to just above the height of the walls. The sides, tapering down, are slightly convex at the top and concave below, terminating in a groove, just above the short raised base with a flat underside, grooved on the outside. 2006.20.0243.jpg
REDMG:1964.1647 Large trefoil oinochoe. High swung strap handle emerges from below the trefoil mouth and reattaches at the middle of the shoulder; slightly concave neck with a step at the top of th the slightly sloping shoulder that curves continuously to a squat, rounded body; broad angled foot with slightly raised base.
REDMG:1964.1648 Projecting rim, with rounded lip and with slightly concave mouth, from which emerges a narrow cylindrical neck, grooved at the base; sloping shoulder; narrow strap handle that curves down to the middle of the shoulder; globular body with a flat bottom. 2002.97.0026.JPG
REDMG:1964.1649 White-ground lekythos, group iii. Tall cylindrical neck broadening to a diagonal shoulder. Vertical strap handle rises from top of neck to bottom of the shoulder, where it broadens. Below the handle attachment a carination marks the join with the straight body, which narrows at the base to a molded pedestal foot with a slightly concave outer edge, convex underside, indented in the centre.
REDMG:1964.1660 Thick rounded rim, slightly overhanging, above a baggy bowl that narrows sharply to a tapering, slightly concave pedestal foot, with a flat base. The interior of the bowl is concave at the centre. Some irregularities such as uneven edge of base.
REDMG:1964.1661 Everted rounded rim with flat upper surface, tapering to a narrow neck that broadens to a piriform body, conical in the lower part, on a tall, slightly flaring foot, with a flat resting surface and conical depression with a nipple at the center. 2004.99.0605.jpg
REDMG:1964.1663 Rounded, slightly raised rim; two pinched round horizontal handles, round in section, rise at a diagonal from the sloping shoulders which curve gently down to a small raised base, concave on the underside. 2003.93.0363.jpg
REDMG:1964.1668.1 Unguent Jar. Miniature amphora with an everted rim, long and narrow neck, and foot with a concave base. Handles on either side and completely attached to the upper body. 2003.93.0254.jpg
REDMG:1964.1674 Flat rim on everted lip, slightly concave on the interior; nearly straight sides which taper sharply to a flat base; (lug) handles. 2003.93.0373.jpg
REDMG:1964.1675.1 Rounded rim surrounded bya slight ridge from which rises the shoulder of a squat ovoid body, tapering to a short angled ring base, concave on central part of underside. On interior of rim five evenly spaced notches are gouged into the inside of the mouth.
REDMG:1964.1676 Everted rim, slightly concave on the interior, concave walls broadening to a carination from which the sides taper sharply to a flat base. 2004.99.0503.jpg
REDMG:1964.1677.1 Rounded rim, nearly flat sides taper to a flat base.
REDMG:1964.1699.1 Everted rounded rim which tapers to a short neck and then broadens to a body with nearly vertical sides, slightly tapering to a flat base; round vertical handle, twisted, extends from the rim to the shoulder. 2004.99.0386.jpg
REDMG:1964.1707.1 Everted thickened and rounded rim, from the back of which extends a round vertical handle that joins the body at the middle of the biconical body with a flat, rough base.
REDMG:1964.1710.1 Probably had a wishbone handle. Typical Late Cypriot I shape. Rounded base. 2008.99.0252.jpg
REDMG:1997.209.2 Bulbous vase, with rounded outturned rim, a tall cylindrical neck tapering down and then broadening to a baggy body with a narrow, flat base. Striations on the exterior indicate where the vase was scraped by the pottery during creation.
REDMG:1997.209.3 Ovoid aryballos, with a rounded mouth, narrow cylindrical neck, pinched round vertical handle reaching from just below the mouth to the middle of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, flat on the underside.
REDMG:1997.209.4 Cup mouth; exterior surface of foot, slightly convex, broadens towards the base, with has a flat underside except for a conical indentation at the centre. 2004.99.0919.jpg
REDMG:1998.153.4 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the bottom of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base and wire marks. 2004.99.0846.jpg
REDMG:2003.84.1 Amphora with a wide neck tapering towards an outward rim. Two handles attached horizontally to the shoulder. Wide body tapers towards the delineated, slightly concave base.
REDMG:2003.92.1 Squat rounded body that tapers towards a ring base. Single strap handle joins the long narrow and leaning neck near the thick rim and shoulder.
REDMG:2003.93.1 Squat wide body that tapers towards a ring base. The body is flat and angled in places. Single-reliefed handle joins the long tapering neck near the thick rim and shoulder.
REDMG:2004.95.1 Phanyllis shape: Cup mouth with flat lip, cylindrical neck broadening to a diagonal shoulder; strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination, from which descends an ovoid body that narrows at the bottom to a flat disk foot, with a conical depression at the centre of the underside. 2004.99.0868.jpg
REDMG:2004.96.1 Palmette. Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, canted and slightly incurved, rising to just below the height of the rim. A short stem, slightly concave, attaches the bowl to a thick disk foot, with a groove at the outer edge of the vertical surface; broad, convex resting surface; hollowed through the middle of the stem. 2004.99.0960.jpg
REDMG:2004.97.1 Plain rounded rim; tapering walls, slightly concave, broaden slightly at the bottom of the bowl, which is moulded with two carinations; diagonal profile to bottom of bowl; tall cylindrical stem, slightly bulging at the middle, curves out to a flat disk foot, with rounded sides, but an indeterminate bottom. Two vertical strap handles swing up from the rim and rejoin the vase at the lower carination, where they comprise a smooth curve with the bottom of the bowl. 2004.99.0889.jpg
REDMG:2004.98.1 Cup mouth, with a slightly convex upper surface; tall cylindrical neck, from which rises a thin vertical strap handle, that rejoins the diagonal shoulder just above the carination; straight sides, taper gently towards the base, to which is attached a molded pedestal foot, slightly concave on the underside, with a cylindrical depression at centre. 2004.99.0926.jpg
TEMP.2003.6.11 Skyphos or Kantharos? The rim is torus-shaped and sloping and the handle is vertical with a central rib.
TEMP.2003.6.3 (a) Part of a triple handle and part of the area of the body where it was joined. (b) Part of lower body area and ring-shaped base with a concave area, whose central, inflated part is pointed.
TEMP.2003.6.7 Two-handled skyphos. The handles are of ellipsoid cross-section, riddled and curving upwards (higher than the body). a) Part of the rim and body. c) Part of the body. d) One handle and part of the body. e) Part of the other handle. f) Tiny bit of the handle. g) Part of the handle and body. 2006.20.0406.jpg
TEMP.2003.6.8 Skyphos with ring-shaped foot and one or two handles, missing. a, b, d, and e) Parts of the rim and body. c)Part of the rim and body and the spring of one handle (completely missing). f) The largest part of the foot, base and lowest part of the body. g) Part of the lower body.
TEMP.2007.2.43 Fragment of a handle from a cup-mouth 2007.10.0035.jpg
TEMP.2007.2.45 Fragment of a mouth and neck 2007.10.0038.jpg
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH