Ure Museum Database

There are 105 objects for which Shape_description contains "an" Ovoid in shape with a hole through the centre on the smallest axis, and an edge around the widest part of the bead. Ovoid in shape with a hole through the centre on the smallest axis and an edge around the widest part of the bead. Ovoid in shape with a hole through the centre on the smallest axis, and an edge around the widest part of the bead.
13.10.12 Body almost cylindrical, pointed at bottom. Short neck, trefoil lip, handle that joins the shoulder an the lip. 2007.99.0135.jpg
13.10.22 Fat Body, narrow neck leading to an out turned rim. One handle joins the shoulder of the vase to the neck directly beneath the rim. Low ring foot. 2008.99.0280.jpg
13.10.26 Shallow bowl; horizontal rim with two holes for suspension at one side, one of the holes has a thin piece of rope in it (modern?)and clay; the base is slightly bulbous (the shape is slightly irregular leading to an incline of the rim to one side); interior smooth; 'ridges' can be felt on the exterior where the clay was turned on the potter's wheel; short, wide resting surface. 2003.92.0071.jpg
13.10.36 Upper half of moulded, standing female, holding an offering in right hand. Back unworked, with hole for ventilation when firing. 2007.12.0009.jpg
13.10.4A-B Two slightly concave disks, not joined (although they sit together well). The lid is thinner than the base with no significant rim, but a beveled edge. The mirror itself has a rim on the underside, and an offset edge on the upper part. These are clearly two parts of a Hellenistic mirror with lid, typical of Hellenistic cyprus. A pair of bronze plates could be locked together because one mirror had a low cylindrical rim into which the other, with a flanged edge, could be fitted. The inside mirror is decorated on the recessed side and polished on the flat side. The outside mirror is polished on the recessed side and sometimes decorated on the flat side. The two polished sides would then lie together, sometimes plated with silver (as in the case of an example in Amathus tomb 62, published in Excavations in Cyprus). For the Greek prototypes see See A. Schwarzmaier, Griechische Klappspiegel: Untersuchungen zu Typologie und Stil (Berlin 1997). 2010.99.0120.jpg
14.9.103 Single fragment of an open shape, perhaps a stamnos 2007.08.0009.jpg
14.9.52 Two fragments forming an irregular shaped piece from handle zone of three-handled jar, with the stump of broken handle. 2003.01.0002.jpg
14.9.72 Perhaps from an oinochoe 2003.46.0072.jpg
2005.9.6 Cast of a low relief from an Egyptian wall. Copies a panel.
2007.4.111 Fragment is an aryballos. 2007.30.0005.jpg
2007.9.9 Two straightish sides meet at an almost right-angle. Depending whether one looks at the outside or the inside of the fragment, there are a further one or two sides, due to the very uneven nature of the edge.
2008.7.4 An almost pentagon shaped fragment preserving some of base and a steeply curved side.
22.3.7 Stemless. Inside, deep concave rim, sharply marked off although the outside is an unbroken curve and does not follow contours of the inside. Groove separates the body from the short foot. 2003.30.0003.jpg
23.11.31E Profile figure facing left wearing a helmet and holding a shield with bike spokes formation. Appears to have once held a spear. Two prominent wide legs emerge from underneath the shield. Lead is an off-colour brown-grey. 2005.06.0030.jpg
23.11.31KK Male facing left, playing pipes. Wearing only a short cloak, which is wound about the shoulders and draped to fall forward over both arms. The left hand holds the pipes to the lips, and the right hand is clenched to grip an incomplete object. 2003.96.0036.jpg
23.11.31MMM Female wearing an elaborate pronged headdress and long skirts. The right arm appears heavier, as though draped in or carrying something. 2005.06.0087.jpg
23.11.31N Profile figure facing left with a flat helmet revealing the face. Only a stump of the spear remains. Holding a complete circular shield with a pattern visible. Thin legs emerge from underneath the shield. Lead is an off-colour white-grey. 2005.06.0093.jpg
23.11.31V Warrior facing right, with crested helmet and round shield decorated with "bicycle-spoke" design. There is an also area of square grid-marking on the neck, below the back of the helmet.
25.9.3 The rim is wide and sloping, the handle is double, of ellipsoid cross-section and forms an intense curve against the body, which is ovaloid and inflated. The base is ring-shaped and narrower than the rest of the vessel. 2003.31.0095.jpg
26.12.32 Stemless; rim very slightly offset; two rounded handles protrude from just below the rim in an oblong shape; groove separating body from very small foot 2002.97.0601.jpg
26.7.8 Bulbous body, wider in the lower part. Projected rim with a very small discus area leading to an irregular filling hole. Long nozzle with a wide, flat, oval wick hole. Applied strip handle attached to the rim and reaching down to the base. Flat unmarked base. Tall indentation on the left side of the body. 2002.97.0553.jpg
34.10.15 Gourd-shaped vessel, with an elongated ovoid body tapering into a cylindrical handle that finally terminates in elongated, rounded tip. Pierced in the bottom of the ovoid part, and ca. 2 cm from the tip. Use as a rattle is indicated by the sound of a pebble inside. 2004.95.0115.jpg
34.10.7 Inslanting rim, with plain round lip, that curves into an ovoid body on a tall foot ring, with slanting interior and exterior walls, the latter curving to a flat resting surface, with flat underside. Two u-shaped handles, round in section, rise at a diagonal from the bottom of the shoulder to high above the rim. 2008.98.0461.jpg
34.2.2 Small hydria with plain everted rim, with a round lip, curving continuously to a narrow concave neck and a sloping shoulder, then an ovoid body attached to a short disk foot, tapering on both exterior and interior, with a flat resting surface and a pointed underside. The vertical strap handle, slightly concave on its outer side, reaches from the lip to the widest part of the body, where it curves into the shoulder. Two horizontal d-shaped, upcurving handles, round in section, also rise up from the join of the shoulder and body. 2010.98.0285.jpg
37.11.8 The vessel has a rope handle at its back with a rotella (connects to the rim with a bit that looks like an anklebone). The other two handles are inclined upwards and of cylindrical shape. They are attached to the upper part of the body in two spots and they are riddled. The foot is quite tall and conical (widening towards the base). 2003.36.0007.jpg
39.8.1 Stemless cup-skyphos with an offset lip terminating in a rounded everted rim; moulded foot comprised of concave element above convex element, interrupted by a ridge at the top. 2004.10.0004.jpg
45.10.13 Fragments of an amphora
45.4.5 Miniature? For shape cf. Metapontine examples dated to the end of the fifth century (Carter 1998, 2.729). For an Attic prototype see Beazley's form 5a (Beazley 1963, 1065 n. 5) 2003.92.0395.jpg
45.6.30 Molded, overhanging rim with a lower flange, curving into a thin neck which gradually widens to an ovoid body; molded foot, concave on the underside. For shape cf. bottles found at Metaponto that are similar (in shape and decoration) catalogued by L. Burn in Carter 1998, 2.632-633, especially T 192-6. Cf. also Padova, Museo Civico Archeologico inv. 1746-C: Zampieri 1996, 203-204 no. 58 (ill.). 2003.37.0001.jpg
45.6.34 Bell-shaped mouth tapering to a short neck that broadens to an ovoid body. High swung strap handle joins from neck to shoulder. Conical foot. 'Pagenstecher lekythos' type. Cf. CVA Michigan 1, pl. 27.11 (smaller but similar shape and surface, said to have been found at Taranto) and Lentini inv. 61597: Lagona 1973, no. 85, pl. 11 (more slender). Both of these examples have smaller handles. For Sicilian vessels of this shape (decorated with bands or undecorated) see examples from Selinunte (Anne Kustermann Graf, Selinunte. Necropoli di Manicalunga. Le tombe della Contrada Gaggera [2002] 181 inv. nos. 113/0 952 and 953, pl. 57 [tomb 113]); Camarina (MonAnt 54 [1990] 25, pl. VIII [tomb 590.2]; 54, pl. XXVI [tomb 799.1-2]; and pl. LXXXIII [tombs 1222.5-6 and 1232.2, which are taken to be (imitative of) Corinthian lekythoi). 2002.97.0017.JPG
45.6.68 Small circular body with convex shoulder and reservoir meeting at the widest point to form an angular girth. Large filling hole in the center of the body, encircled by a small depression of the discus. Nozzle is flat with slightly curved sides. The tip of the nozzle is flat with rounded, but unequal sides with an oval wick hole. Small shallow circular foot in the center of the body. 2005.01.0074.jpg
45.9.2 Flat-lipped conical mouth, vertical strap handle rising from the bottom of the neck and reattached at the top of the 'ankle' on the body, which is in the shape of a left foot wearing a sandal. The base is a flat surface, separated from the sole by an incised line. 2011.98.0080.jpg
47.2.7 Slightly flaring rim, flattened at the top, on an angled wall that curves sharply to a shallow bowl; horizontal strap handle, nearly triangular, attached just below the rim, rising slightly upwards; groove at the junction of body and broad ring foot, slightly convex at centre of underside. 2008.98.0404.jpg
49.1.2 A slim alabastron with a small mouth and a projecting rim, an offset neck, lugs on either side of the body near the neck, and a raised three-stepped foot that is slightly concave on the underside. 2004.13.0014.jpg
49.10.2 'Cocked hat' open lamp with pinched in sided that form an unbridged nozzle. Slightly out turned rim. Base is not demarcated and is not completly flat. 2005.01.0015.jpg
50.12.29 Fragment of rim from an open vessel with slightly everted rim. 2003.98.0090.jpg
50.12.38 Fragment from the rim of an open vase. 2003.98.0248.jpg
50.4.10 Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside. 2003.92.0271.jpg
50.4.18 Nearly identical to a lidded mug excavated from the Pantanello Necropolis at Metaponto, published by Maria Elliott, in Carter 1998 2.643, fig. 14.2, 667 M3 (T 128-2): the Pantanello mug, which Elliott describes as an 'odd mug' and probably a local imitation of the late 5 c. Attic double handle mug (667), has a knotted handle which is otherwise similar to ours in contour and thickness. For less close comparanda cf. Morel 1981, type 5345a (citing examples from Capua and environs, e.g. CVA Capua 3, Italia 1312 no. 2: less squat, but similar); these Campanian examples are dated to ca. 300. Convex lip with rounded outturned rim, to which is joined a vertical strap handle, tripartite, with two projections on either side of the rim attachment. The handle loops and reattaches at the top of the bulging, ribbed body (ribbing visible on the interior). Tall angled ring foot, the interior of which has an incised spiral (not visible on exterior). 2010.98.0291.jpg
50.4.25 Circular body, concave discus with a circular filling hole to the frontal left hand side. Flat nozzle with concave sides and single ended volutes, the tip is splayed and ends in an obtuse angle, the wick hole is circular. There is a base demarcated but not raised, the base is slightly concave. 2001.99.0018.jpg
50.5.1 Trefoil lipped oinochoe with rounded protrusions either side of neck-handle join. Single curved handle that reaches over into mouth, appears to have had an oblong pattern, and is flanked by moulded protrusions at the top and bottom. Wide neck with a groove at juncture with bulbous body. Ring foot reserved and base raised. 2006.20.0092.jpg
51.1.2 The vertical handle is of ellipsoid cross-section with a banded back. The horizontal handles are riddled, circular and slightly curving upwards. The foot is conical, with a ring-shaped termination and the base has a concave, conical surface with an inflated semi-spherical central part. 2010.98.0180.jpg
51.4.11 Moulded rim, grooved, with flat upper surface and sharp lip, on a short cylindrical neck, with attaches, at a ridge, to an ovoid body, attached below, also at a ridge, to a slightly flaring stand, with splaying foot, slightly ridged on upper edge, bevelled on exterior, hollow on the interior. From the shoulder, on either side, rises an m-shaped handle (half of one chipped off) with short projections in the middle. Three holes (to enable air flow) are drilled into the upper part of the stand, just below the join. 2002.97.0369.jpg
51.4.9 The rim is conical, strap small handle connecting the enck with the shoulder, is banded with an inflated back, shoulder curving slightly upwards, the body is ovaloid, tapering down to a torus foot, conical underneath. Cf. Agora 12 part 2, no. 1117, pl. 38 Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p43 shape class E, pl. 14 nos. 130.108 & 127.59 2013.99.0165.jpg
51.7.7 Sessile kantharos, traditionally thought to be an imitation of the 'Saint-Valentin' class of ceramics (Beazley 1947, 219), although Robinson 1997 now says that it is derived from a metallic prototype. Quite standard among its class (Xenon Group kantharoi) in shape (and decoration). Rounded outturned rim, below which are attached two vertical strap handles, rejoined at a slight ledge between upper body and lower body; upper body near cylindrical, whereas lower body is a deep bowl; low flaring ring-foot, ridged on the exterior, with concave face on the interior continuously curving through the resting surface. 2003.93.0234.jpg
52.3.3 Broad flat rim; short thick neck; handles are comprised of two vertical bars joined at the rim by an overhanging horizontal bar with downward protrusions at either end; body tapers to conical footring; flat base. 2003.95.0050.jpg
53.8.1 Mesomphalos phiale with a thickened rounded lip, with a slight carination on the inside edge, with convex walls, sloping down to a flat plate, at the centre of which is an omphalos (raised central boss), decorated in relief all around. 2010.98.0071.jpg
56.8.2 Tall inslanting rim with plain round lip, sharply turning to a short shoulder that broadens to an ovoid body, which tapers to a tall moulded foot, comprised of a beveled top, two concave elements, a carination, below which a scotia above a torus. The resting surface is ridged and the underside consists of a pointed convex centre, within a tapering concave part. Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim. On either side of each handle is a pointed lug. 2002.97.0579.jpg
56.8.8 The body is conical, widening towards the top. The rim has horizontal sides and a small lip at the top. The band handles are almost ellipsoid, with peaked terminations. Ribbon handles. The base is in the shape of an inverted echinus (a conical stand?). 2003.95.0104.jpg
71.12.5 Long, thin strigil steeply curved. The handle is thicker at the front and thinner at the back where it bends over to form an oblong. The thinner piece is not attached to the body but curves back on itself and end is a flat circle. 2004.95.0149.jpg
71.12.6 Wide strigil curved in a tight arc. Handle is square and thinner on the back than the front as it bends over to make an oblong shape. The handle adjoins the strigil in a long triangular point with an incised line acting as a border. 2011.98.0027.jpg
78.12.16 Deep circular body with a rounded shoulder terminating in a large filling hole. Long rounded nozzle titling slightly upwards, irregular rounded tip and an oval wick hole. Large splayed foot. Small vertical lug on the right hand side. 2008.99.0799.jpg
78.12.17 'Cocked hat' lamp, Shallow bowl with one half of its rim folded in and pinched to form an open wick rest. Wide rim, base is uneven making lamp sit to left hand side. 2005.01.0099.jpg
78.12.3 Circular body, small rounded nozzle with an oval wick hole, Small filing hole on the central axis but not in the centre of the discus. Small single volutes, concave moulded discus. Vertical handle with hole through. No foot, slightly concave base. 2008.99.0724.jpg
79.1.1 Deep Circular body, concave discus with a wide filling hole. Flat nozzle with an oval wick hole. Small pierced lug on the right hand side of the lamp. Circular foot. 2005.01.0021.jpg
79.1.10 Circular shallow body, concave discus with a small filling hole in the centre. Long flat nozzle with concave sided which meet the tip of the nozzle at an acute angle, the tip is rounded, large circular wick hole. Base is concave with a moulded ring. At the back are the remains of a handle. 2005.01.0034.jpg
79.1.14 large circular shape with a short rounded nozzle. Three bisected un-pierced lugs placed on the shoulder of the lamp equidistantly. The discus is sunken and there is a moulded rim to the discus which runs all the way around the wick hole in a continuous form. The wick hole and the filling hole are the same size and are in line with each other, there is also what appears to be an air hole in-between the channel of moulding. There is a ring base. 2005.01.0290.jpg
79.1.18 Rough oval shape, very flat body with a flat discus and filling hole in the centre. There is no nozzle, just an elongation of the discus with a small circular wick hole. Circular ring base. 2005.01.0044.jpg
79.1.4 Small Circular body with a convex shoulder and a small flat discus with a large filling hole. Small lug on right hand side with dent in the top, this however does not reach through to the bottom. Flat long nozzle, slightly concave sides with a splayed tip and an oval wick hole. Small circular concave foot. 2005.01.0025.jpg
79.1.5 Circular body with convex shoulder and a concave discus with small filling hole. Small raised protruding foot with flat base. Large vertical handle with one incised line along the length of it and a second band laying across the handle at the highest point, also with an incision along it. Long spout with irregular splayed tip, large oval wick hole. joining lines of the handle and the nozzle are apparent. 2005.01.0336.jpg
79.1.6 Circular body with slightly convex shoulder and a slightly concave discus, two holes of differing size are in the discus. The nozzle is small and rounded with an oval wick hole just off center. Vertical handle which reaches to the base which is demarcated with two concentric circles. 2005.01.0083.jpg
79.1.8 Small circular body with a convex shoulder and a small concave discus with an irregular filling hole at the centre. Nozzle is slightly arched and splayed at the tip with concave edges and an obtuse tip. Wick hole is oval. base is a concave small demarcated circle with a circle within. 2005.01.0029.jpg
79.1.9 Deep circular body, small concave shoulder leading to large filling hole. Flat long nozzle with concave sides, a splayed tip and an irregular oval shaped wick hole. Large circular straight sided foot with a concave base. 2005.01.0060.jpg
E.23.26 Everted lip attached to long straight neck, shallow but wide upper body. Lower body gently tapers to an everted foot with a concave base. Handle attaches to just below the top of the neck and rejoins the body at the widest point of the body. 2007.01.0059.jpg
E.23.42.1-4 Group of four red beads, unattached but found together. Two are long and thin, one is a shallow but complete circle and the fourth is an incomplete circle and thick.
E.62.44 Lid is oval with a central circular knob and traces of an incised band on top. (Lid is missing!) Body has a flat rim, same shape and size as lid so they sit together, but with a central circular opening. Thin neck leading to shoulders. Four oblong feet at each 'corner' and the base between is flat. Flat rim on top of body is reserved. The inside is a cylindrical well, not matching the contours or shape of the outside. Heavy object.
E.63.17 Faience beads in half an oval shaped shell. Approximately 150 circular beads and 7 long beads (of varying lengths). 2005.89.0036.jpg
E.65.1 Wide flaring lip with rounded rim, narrowing to a short neck, broadening to an ovoid body, with a pointed base. 2002.98.0045.jpg
L.2016.3.11 Flask made of thin glass. Long, narrow neck leads to an ovoid body with concave base.
L.2016.3.14 Female dancer, slightly turned to her left in a likewise slight step position. Her right arm slopes down, her left arm is raised and she is looking to her left hand, which is bent backwards. A hole in mentioned hand gives rise to the suspicion that she is holding an (missing) object. There is another hole at her left heel.
L.2016.3.8 Wide opened mouth with rounded everted lip. The broad, concave neck curves into an almost diagonal shoulder. The body is slightly angled at mid-section and leads directly to the ovoid base.
REDMG:1926.99.52 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to an ovaloid body with rounded base; small round vertical handle is tucked in under the overhanging lip. 2004.99.0909.jpg
REDMG:1935.87.1 Trefoil mouth at the back of which is attached an angular strap handle, that rises slightly and then descends sharply to join the lower shoulder; long neck that broadens gradually to a piriform body; short ring foot with rounded profile, flat resting surface, diagonal inside wall, and slightly convex underside. 2005.99.0060.jpg
REDMG:1935.87.21 Broad projecting rim with flat lip, narrow cylindrical neck, sloping shoulders curving into an ovoid body, narrowing to a flat base; flat strap handle extends from the rim to the bottom of the shoulder.
REDMG:1935.87.24 Convex and large. The vessel has an incurving rim, very convex outside and well marked off from rest of bowl. The transition from bowl to and from stem to foot is an unbroken curve.
REDMG:1935.87.32 Column krater. The handles have two bars of a cylindrical cross-section and adjoin in a square at the rim, having side-surfaces above the bars. The foot is in the shape of an inverted echinus, a cylindrical stand widening towards the bottom. There is also a plastic ring just below the lowest part of the body. 2005.89.0042.jpg
REDMG:1947.13.1 Large pseudo-panathenaic amphora with a cup-shaped mouth terminating in an outturned rim; offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original). 2005.90.0016.jpg
REDMG:1951.113.3 Rounded rim, slightly incurving, below which are attached two nearly triangular horizontal strap handles and ring base, canted slightly up; rounded body broadens slightly and then narrows to an angled ring foot, curved on the resting surface, and offset from the slightly convex underside. Body broader than standard Apulian shape, so that it can't fit easily into the sequence of Gnathian skyphoi.
REDMG:1951.136.1 Moulded knob, topped by an offset beveled element with inset circle on upper surface; concave stem curves into a diagonal lid, with a slightly incurving lip, with a rounded rim. 2004.99.0633.jpg
REDMG:1951.140.1 Broad rim, slightly convex on upper surface, ridged at the outside edge, with overhanging lip; neck, concave in profile, broadens to a nearly flat shoulder that curves sharply to an ovoid body, which narrows sharply at the bottom, where it is joined to a moulded pedestal foot with a splayed base and concave underside; upper part of foot has tapering straight sides; the profile of the base is decorated with two ridges. Two incurving horizontal handles, round in sectiona, are attached to the upper third of the body; a vertical handle, also round in section, emerges from the top of the neck and curves down to the lower part of the shoulder. 2004.99.0810.jpg
REDMG:1951.148 Broad rim with slightly convex, tapering upper surface, and overhanging concave lip; rim joins on either side with diagonal spurs at top of round columnar handles (two either side), which descend at a slight diagonal to the shoulder. Broad neck, slightly concave, attached sharply to short curving shoulder from which an ovoid body descends and tapers to the foot. 2003.93.0269.jpg
REDMG:1951.150.1 Flaring rim, curving continuously from the exterior, with an overhanging, convex lip, curving on the underside into a short, thick neck that broadens to a baggy body, sharply joined to a broad pedestal foot, flat on the upper surface, convex on the vertical surface, and hollowed slightly interior, with a cyma molding leading up to a flat underside.The triple-ridged strap handles rise up from the sides of the neck and rejoin at the shoulders. 2005.99.0161.jpg
REDMG:1951.152 Moulded grooved rim, with a flat overhanging lip, atop a thin, nearly cylindrical neck, attached to an ovoid body, ridged at the top; raised base, with thin reseting surface and slightly pointed underside.
REDMG:1951.153.1 Askos in the shape of a duck, with an everted rounded rim on a short cylindrical neck, from the back of which rises a strap handle that curves down to join the vase just above the tail. 2005.90.0025.jpg
REDMG:1951.159.1 Large pseudo-panathenaic amphora with an offset neck divided from the shoulder by a plastic ring from which rise two vertical strap handles that curve down to the bottom of the sloping shoulder; ovoid body tapering to a thick stem on a pedestal base (not original). 2005.89.0030.jpg
REDMG:1953.25.40 Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards. The body is rounded in the lower part and sharply joins a moulded foot, with an angled upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface. 2003.97.0324.jpg
REDMG:1953.25.51 Upturned rim, slightly offset from the neck, which is cylindrical and nearly straight, joining an ovoid body, slightly baggy, supported by a broad ring base. Vertical strap handle, grooved, extends horizontally from the rim and curves back into the body, which it joins in the upper part.
REDMG:1953.25.53 Incurving rim with concave lip, narrowing to a short neck at the top of which is attached a small vertical strap handle that extends the the shoulder; wall curves continuously from neck, widening to an ovoid body atop a disk foot; underside concave with a slight circular protruberance at centre. Tapering 'cucumber', survival of the Late Corinthian Archaic type (see Corinth 13, 140-41, fig. 15), but with a disk foot. E.g. Corinth T1317: Corinth 13, 222 no. 277-4, pl. 37. Cf. also Rhitsona 50.273. 2002.97.0005.JPG
REDMG:1953.25.55 Wide flaring mouth with rounded rim; short neck narrowing to sharp join to an ovoid body that tapers sharply at the bottom to a flat base; grooved just above the base. Two-piece strap handle splays at the attachment to the rim and rejoins the shoulder (for handle cf. RM.1950.25, which is, however, knotted). 2003.93.0301.jpg
REDMG:1953.25.69-70 Moulded knob, topped by an offset beveled element with inset circle on upper surface, with a two-part profile, convex on the upper part; concave stem curves into a diagonal lid, with a slightly incurving convex lip that terminates in a rounded rim. 2007.02.0002.jpg
REDMG:1958.23.1 Wide body that tapers at the bottom towards a slightly convex base. The rounded base forces the jug to lean to one side. The tall narrow neck has an everted rim. Single, wide flat strap handle joins the base of the rim and the shoulder.
REDMG:1958.33.1 Jug with bulbous body with delineated flat base. Single strap handle joins the upper body to the centre of the long neck with a funnel-shaped mouth ending with an everted rim.
REDMG:1964.1613.1 Circular shallow body with rounded convex shoulder leading to a concave discus with two small filling/air holes along a central axis. Nozzle is of an average length with a rounded wick hole. large un-pierced pinched vertical handle, small circular, slightly concave demarcated base. 2005.01.0262.jpg
REDMG:1964.1619.1 Rough oval shape, straight sides, slightly upward sloping shoulder, raised rim that runs from the wick hole, around an almost circular discus area and then returns to the wick hole, this rim forms a slight rim for the wick hole too. In the centre of the discus area is small filing hole, the nozzle is deep and in the same form as the body with a large wick hole. Small circular ring base with slight depression. Lamp leans towards the left on the base. 2003.93.0121.jpg
REDMG:1964.1621 Wide mouth with moulded, slightly concave lip, and slightly everted rim, below which the short vertical strap handle emerges, bends, and descends to the shoulder. Globular body attached to an angled ring foot. Shape similar to Corinthian round-mouthed oinochoe, type B (cf. Corinth 13, fig. 14), but with a slightly concave lip, and more globular than Corinth T1712: Corinth 13, 228 no. 296-2, pl. 41. 2008.99.0225.jpg
REDMG:1964.1668.1 Unguent Jar. Miniature amphora with an everted rim, long and narrow neck, and foot with a concave base. Handles on either side and completely attached to the upper body. 2003.93.0254.jpg
REDMG:2003.84.1 Amphora with a wide neck tapering towards an outward rim. Two handles attached horizontally to the shoulder. Wide body tapers towards the delineated, slightly concave base.
REDMG:2004.95.1 Phanyllis shape: Cup mouth with flat lip, cylindrical neck broadening to a diagonal shoulder; strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination, from which descends an ovoid body that narrows at the bottom to a flat disk foot, with a conical depression at the centre of the underside. 2004.99.0868.jpg
REDMG:2004.97.1 Plain rounded rim; tapering walls, slightly concave, broaden slightly at the bottom of the bowl, which is moulded with two carinations; diagonal profile to bottom of bowl; tall cylindrical stem, slightly bulging at the middle, curves out to a flat disk foot, with rounded sides, but an indeterminate bottom. Two vertical strap handles swing up from the rim and rejoin the vase at the lower carination, where they comprise a smooth curve with the bottom of the bowl. 2004.99.0889.jpg
TEMP.2003.6.13 Fragment of the double handle of an oinochoe. 2006.20.0629.jpg
TEMP.2003.6.25 Roughly five sided, although actually seven sided, and looks roughly like an arrow.
TEMP.2005.8.1 Fragment of an opened vessel, form 'Dragendorff 29' (according to M. Fulford) 2007.03.1160.jpg
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH