Ure Museum Database



Browse
There are 110 objects for which Shape_description contains → bowl
11.10.21 If the foot is restored correctly this is a variant of Ure's type K 2 (Ure 1927, 68), which is the most common Haemonian skyphos, as judged by the Agora material: cf. Agora 23, 60, esp. no. 1516, pl. 103 (with the same type of foot); ABV 565-71, 598-710 Slightly concave black rim; shallow bowl with flat underside; moulded ring foot, with concave inner surface. 2008.99.0780.jpg
13.10.13 Shallow bowl; wide neck with inward rim; flat wide base. 2008.99.0131.jpg
13.10.16 Rounded rim; deep bowl; two small ribbon handles on rim; thin ring foot. 2008.99.0169.jpg
13.10.19 Wheel made open bowl with a concave foot. 2008.99.0139.jpg
13.10.26 Shallow bowl; horizontal rim with two holes for suspension at one side, one of the holes has a thin piece of rope in it (modern?)and clay; the base is slightly bulbous (the shape is slightly irregular leading to an incline of the rim to one side); interior smooth; 'ridges' can be felt on the exterior where the clay was turned on the potter's wheel; short, wide resting surface. 2003.92.0071.jpg
13.10.27 'Cocked hat'; open lamp consisting of a shallow circular bowl; two folded in edges which form a wick rest; small rim visible at back; small central circular foot. 2005.01.0001.jpg
14.9.1 Deep bowl with slightly pinched in, uneven rim; wishbone handle; body tapers to flat base. Typical Late Middle II-Cypriot I shape (perhaps near carination suggests something earlier). 2002.98.0197.jpg
14.9.106 Small bowl, 'later and light', according to Gill 1986; shallow bowl with incurving rim and torus ring foot with concave inner face 2003.97.0523.jpg
2004.8.1 Fragment from the bowl of a Skyphos. 2006.20.0564.jpg
2005.3.33 Fragment of bird kylix - base of the bowl and join of stem 2006.20.0370.jpg
2007.4.107 Fragement perhaps part of a bowl or cup. 2007.30.0015.jpg
2007.4.109 Fragment is semi-circle, perhaps part of small bowl. 2007.30.0024.jpg
2007.4.151 Fragment from base, stem between base and main bowl of pot
2007.4.152 Base of a pot, around half of circular base remains, with stem and a small part of the bowl of the pot
2008.7.113 Round shallow bowl
23.11.1 Bowl with incurving rim, diagonal profile in lower body, and raised base. Previously described as lamp of kothon type. 2003.35.0082.jpg
26.12.33 Slightly incurving lip, with a carination just below the rim, narrowing with convex sides to a flat base, with convex sides just above base. Wire cutting marks in circular design on base. On the interior, the centre of the bowl rises up slightly. 2008.10.0003.jpg
26.12.7 Stemmed. The vessel is slanted to one side, which suggests that the base is not flat or that the body has not been made to rest flat on top of the foot. The wide rim has a flat lip. The base hollow to where the bottom of the bowl rests. 2003.58.0008.jpg
26.2.11 Fragment including part of rim of a very small bowl. 2013.04.0028.jpg
26.2.25 Fragment from a large bowl 2003.45.0092.jpg
26.2.68 Fragment of the bottom part of the cup of a chalice(?)or bowl(?). Single, hexagonal fragment from the floor of the bowl. 2007.03.1175.jpg
26.2.95 Fragment from the bowl. 2013.04.0221.jpg
27.4.1 Deep ovoid bowl with concave rim and rounded lip, narrowing to a disk foot, rounded on the exterior, sharply beveled on the interior, with a flat resting surface and a slightly convex underside. On either side a u-shaped handle, round in cross-section, rises up from just below the rim, top the height of the lip. There is a slight groove at the join of body and foot. 2010.98.0197.jpg
27.4.12 Very shallow bowl. Foot hollow. 2002.97.0239.jpg
27.4.5 Rim turns sharply out, broad and flat on top. Handles rounded at far end and with upward twist. In centre of bowl a well 1.5 cm deep occupies the space interior of the stem. The foot appears in three stages, the first ridge being the narrowest, and the other two getting bigger in sequence. 2003.19.0007.jpg
35.5.34 Fragmentary. Foot, handles, and considerable parts of the bowl missing. 2004.10.0083.jpg
37.11.5 Straight sided, fairly deep, rimless bowl; two horseshoe-shaped horizontal handles attached just below the thin rim; thin groove before base. Flaring ring foot. 2003.97.0555.jpg
39.1.2 Strongly moulded rim, curving into a roughly cylindrical upper body that bulges out into the shallow bowl. Two vertical handles, roughly square in section, with horizontal pointed spurs, level with the rim, rejoin the body at the upper part of the bowl. Two-part moulded foot, with a domed underside. 2010.98.0301.jpg
45.10.2 Two handles on opposite sides and are slightly concave at top with the rest flat and underside has deposits. Inside has interesting deposits but not in centre. Moulded ridge between upper and lower part of bowl with incised lines. Foot same contour inside and out. 2003.34.0099.jpg
45.10.5 Shallow bowl with wide interior, short stem and thick footring. 2011.98.0040.jpg
45.6.38 Stemmed. The bowl is shallow with a flat lip. 2003.31.0011.jpg
47.10.3A-B Lid: tall, conical, flat-topped knob on a sharply sloping conical lid, with plain rim, vertical profile, flat underside, leading to a short flange (0.3) to sit within lekanis. Lekanis: slightly everted, rounded rim with flat lip, on a deep bowl with straight walls in two parts, separated by a sharp carination near the bottom, attached to a short disk foot, angled on inside and out, with a slightly convex underside. From either side of the rim extends a semicircular horizontal handle, round in section, that rises very slightly, flanked by short pointed spurs or lugs on either side of the handle. 2010.98.0012.jpg
47.2.15 Wide, flat rim; shallow bowl; thin footring; concave base. 2008.99.0110.jpg
47.2.3 Castulo cup: large stemless cup with inset lip. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising slightly over the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove. 2008.10.0012.jpg
47.2.5 Rounded thin rim, below which are attached two horizontal round handles, horseshoe-shaped; vertical wall curving into a shallow bowl, on a broad, flaring ring foot with a continuous concave interior surface from the underside through the resting surface. 2008.98.0406.jpg
47.2.6 Slightly flaring rim, flattened at the top, but sloping inwards; angled wall that curves sharply to a shallow bowl; horizontal, horseshoe-shaped strap handle, attached just below the rim and rising slightly above; broad torus ring foot. 2001.99.0123.jpg
47.2.7 Slightly flaring rim, flattened at the top, on an angled wall that curves sharply to a shallow bowl; horizontal strap handle, nearly triangular, attached just below the rim, rising slightly upwards; groove at the junction of body and broad ring foot, slightly convex at centre of underside. 2008.98.0404.jpg
47.2.8 Thickened, slightly everted rim, surmounts a wide shallow bowl; ring torus foot. 2001.99.0128.jpg
47.2.9 Small bowl, 'later and light', according to Gill. Cf. Reading 14.9.106 Shallow bowl with incurving rim, concave on inner face, torus ring foot, circular ridge in middle of underside before convex centre. 2008.98.0431.jpg
47.7.1 Rounded rim, slightly outturned, below which are attached two horizontal round handles, u-shaped, slightly curving upwards; vertical wall curving into shallow bowl, on a broad, flaring ring foot with a convex underside. 2010.98.0267.jpg
48.12.1 Deep bowl; almost vertical sides; two rounded handles progress straight upwards from the middle of the body; slight groove before small foot; concave base 2003.92.0249.jpg
48.12.2 Deep bowl (corresponds to FS [='Furumark Shape'] 285). The shape seems somewhat less deep than most published deep bowls. The best comparison to be found is in Mountjoy 1999, 1.189 Argolid no. 447, from Asine, House I, room 46. Bowl of pinkish fabric with flaring lipless rim, concave sides, tapering in lower part to a high ring base (is it conical?). Two horizontal round handles are attached to the side walls. 2003.98.0127.jpg
49.12.1 Everted, nearly flat rim, with round lip, curves sharply to a cylindrical upper body, somewhat concave, separated from the lower body by a ridge above a flange. The lower body is comprised of four horizontal ribs, above a shallow bowl that narrows to a thin, short stem, that curves continuously into a conical foot, finishing with a broad groove above a rounded edge. The underside is hollowed. Two strap handles, which flare on either side, rise up above the rim and then descend to rejoin the body at the flange. A spur projects from the lower part of each handle, approximately in the middle of the upper body. 2008.98.0387.jpg
49.8.7 Ridge between shallow bowl and outurned rim; two cylindrical handles curve upwards from just below ridge; hole in base where stem was 2004.03.0001.jpg
50.10.2 Slightly everted lip with nearly flat rim, on a cylindrical bowl with concave sides, divided with a a sharp carination from a convex lower that smoothly curves into a short stem on a rounded foot ring, with rounded resting surface, tapering inner wall, and nearly flat underside. Two suspension holes are arranged horizontally just below the rim on one side. 2008.98.0344.jpg
50.10.5 Incurving, rounded on the top rim; fairly deep bowl curves into thick low stem; two tiny grooves at join of stem and base; broad, flat foot; conical underside.
50.10.6 Deep bowl; two horizontal handles emerge from just below the rim; vertical walls taper down to small disk foot; concave underside with central convex circle. 2004.07.0006.jpg
50.12.21 Fragment of bottom of cup or bowl. 2007.01.0147.jpg
50.12.3 Fragment of a bowl with vertical handle. 2003.98.0221.jpg
50.4.10 Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside. 2003.92.0271.jpg
50.4.12 Castulo cup': large stemless cup. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove. 2003.97.0532.jpg
50.4.13 Attic type skyphos (cf. Agora 12, no. 341) except for plain underside, size (somewhat smaller than Attic examples), and perhaps breadth of handles. Rounded rim, below which are two horizontal round handles, horseshoe shaped. Walls continuously curve into a deep bowl, divided from the short torus ring foot by a groove. 2003.97.0646.jpg
50.4.14 Gill classes it as a kantharos of the 'Ampurias class'. Sessile kantharos with low handles. Sparkes 1968, 9, notes that the sessile kantharos with low handles is the most practical, albeit least elegant, of the fifth century kantharoi. Slightly outturned, rounded rim; tall, flaring wall, offset from shallow rounded bowl, divided from moulded ring foot by groove. Two vertical strap handles loop down from rim down to just above junction of wall and bowl. 2003.92.0162.jpg
50.4.15 Rim curved slightly outwards. Inclining neck of roughly equal depth and diameter as bowl. Small vertical handles curving from rim to mid-section. Convex bowl. Torus (tyre shaped) foot with no stem. 2005.02.0014.jpg
50.4.16 Plain, rounded, thickened rim; shallow cup; ridge at junction of bowl and stem; tall stem curving continuously to the upper surface of the foot, which has a slightly concave outer surface, and rises to a small underside. Classed by Gill as a 'plain rim' type; he further notes 'Acrocup type foot and fillet'. 2003.92.0176.jpg
50.4.22 The bowl is a variant of Hoffmann's shape III (see H. Hoffmann, Tarentine Rhyta [Mainz 1966] 2) but the bowl is unusually aligned with the animal head. The Reading example corresponds to Hoffmann's 'main group' of Tarentine ram's-head rhyta, and particularly to his group E, which is 'the first wholly naturalistic representation of the ram-head', which he ascribes to the 'hand of Coroplast Beta' 2003.92.0306.jpg
50.5.5 Large krater with wide, downturned rim that extends sharply from the top of the body; two upcurving handles high on the body, which narrows to a short, cylindrical stem; hollowed pedestal foot, ridged just below the top of the foot. The resting surface is concave and the underside undulates smoothly up to the bottom of the bowl. 2004.04.0002.jpg
51.1.1 Flat outturned rim with rounded lip, sharply curving to nearly cylindrical bowl, slightly concave, which broadens and then tapers in the convex lower part to a disk foot, sloping on the upper part, rounded on the lower part, tapered on the interior, with flat resting surface and nearly flat underside. Just below the rim on one side are two holes for suspension. 2002.97.0233.jpg
51.7.10 Body projects from tall rim; two oblong handles with side projections; deep bowl; conical footring; concave base. 2003.97.0333.jpg
51.7.7 Sessile kantharos, traditionally thought to be an imitation of the 'Saint-Valentin' class of ceramics (Beazley 1947, 219), although Robinson 1997 now says that it is derived from a metallic prototype. Quite standard among its class (Xenon Group kantharoi) in shape (and decoration). Rounded outturned rim, below which are attached two vertical strap handles, rejoined at a slight ledge between upper body and lower body; upper body near cylindrical, whereas lower body is a deep bowl; low flaring ring-foot, ridged on the exterior, with concave face on the interior continuously curving through the resting surface. 2003.93.0234.jpg
52.3.4 Slightly convex, slanted, overhanging lip, rounded at the edge, on a slightly concave tapering rim, slightly offset from the lower bowl that curves sharply to a tall conical foot, rounded at the edge, with flat resting surface and a slightly convex underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs (handle and lugs broken off on one side). 2004.07.0009.jpg
53.8.3 Slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs. 2010.98.0024.jpg
56.8.6 Rounded cup with sharply incurving rim and shallow bowl, on a short hollow stem which broadens to a disk foot with a grooved foot, and deeply concave underside. 2010.98.0102.jpg
58.2.3A Pyxis: Hemispherical bowl with raised base. Matching lid is 58.2.3B 2008.98.0396.jpg
58.2.6 One-handled bowl. Rim is slightly concave. Handle is in wishbone shape. A deep well is in the centre, of a greatly smaller diameter than the rest of the bowl. For general shape cf. Sydney, Nicholson Museum 55.18 (Base-ring wheel-made Ware, Late Cypriot III). 2003.92.0112.jpg
59.6.1 Everted, concave rim, with round lip, offset by a carination from a shallow bowl, tapering sharply to a short stem that broadens to a moulded foot, concave in profile, with a nearly flat resting surface, grooved just within the resting surface, hollowed and conical within; a slightly incurving d-shaped handle rises up, on either side, from the centre of the bowl to the height of the kylix. 2010.98.0333.jpg
60.1.3 Stemless cup with a plain rounded rim. Two horizontal round handles, oblong in shape, incurved and rising over the rim. Handles rise from half-way down the shallow bowl, which is divided from spreading, lipped torus ring foot by a broad groove. 2003.94.0022.jpg
60.8.3A-B Lid: three tiered round knob with central, nearly conical well; short concave stem curving above and below into knob and lid; nearly flat lid tapering gently to a short vertical rim, rounded at both edges. The underside is slightly hollowed under the knob. Lekanis: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls, slightly carinated and narrowing, with convex lower portion, to a very short stem, on a rounded disk foot, with a flat resting surface, curved on the underside, with a rounded point at the centre. A wishbone handle rises from the top of the wall, on either side; a lug protrudes from either side of each handle. Ure 1960, 216 notes that what remains of the one handle indicates that it was pointed (wish-bone shaped) at the centre as well as rounded in section. 2002.97.0575.jpg
61.6.1.5 Small bowl with a thick, uneven rim, concave sides, and small base. 2003.92.0125.jpg
61.6.3 Everted lip with rounded rim, curving out to a short shoulder, then tapering to a conical, deep bowl, with short stem that broadens to a flat, disk foot, with tapering, slightly rounded exterior, gougedresting surface, slightly concave interior, and slightly convex underside. From either side, just below the rim, a u-shaped handle, round in section, rises up to just above the top of the rim. 2010.98.0337.jpg
61.6.5 Lid: Short button knob, with flat band, beveled interior edge, and slightly convex top, curving smoothly to a nearly flat underside that smoothly joins a short, slightly concave stem, that again smoothly joins a flat, tapering smoothly to a short vertical rim, rounded at both edges. The underside is hollowed under the knob. One-handler: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls curving into a convex lower portion then a very short stem, on a rounded disk foot, with a flat resting surface, beveled on the interior, and slightly convex on the underside. A single, recurved horizontal handle, round in section, rises above the rim. 2002.97.0677.jpg
64.7.1 Stemless (of a late type). Thin inturned rim; shallow bowl; one remaining rounded handle curves up slightly higher than the rim from just below the rim; round footring; flat underside with slight moulded circle on base. 2003.57.0002.jpg
78.12.17 'Cocked hat' lamp, Shallow bowl with one half of its rim folded in and pinched to form an open wick rest. Wide rim, base is uneven making lamp sit to left hand side. 2005.01.0099.jpg
78.12.18 'Cocked hat' lamp, shallow open lamp fashioned from a bowl with two sides folded in to provide a wick rest. The rim is thick and very pronounced leading on to a vertical sided shallow reservoir. the base is flat but there is no foot. 2005.01.0281.jpg
80.7.1 Large lekanis with a slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs. 2010.98.0222.jpg
83.9.3 Bowl with outturned rim: cf. Reading 47.2.8 (from Tamassos) and Reading 83.9.4 and 83.9.7 (both from Al Mina). 2006.20.0926.jpg
83.9.4 Bowl with outturned rim: cf. Reading 47.2.8 (from Tamassos) and Reading 83.9.3 and 83.9.7 (both from Al Mina). 2006.20.0923.jpg
83.9.5 Ovaloid bowl with base 2006.20.0127.jpg
83.9.7 Bowl with outturned rim: cf. Reading 47.2.8 (from Tamassos) and Reading 83.9.3 and 83.9.4 (both from Al Mina). 2006.20.0307.jpg
E.62.15 Curved rim fragment, probably from a bowl 2006.20.0687.jpg
E.62.8 Deep sided bowl with curved sides and no significant base meaning bowl is slightly unsteady. There are two incised bands on the outer surface around the rim and a more significant ridge on the inside where bronze has been folded over to make a smooth and safe edge. 2005.88.0070.jpg
L.2011.1.12 Concave shape, maybe a bowl of a vessel, with a concave underside. 2011.97.0165.jpg
L.2011.1.22 Stem of a glass vessel, with a ridge at the junction of the stem with the foot. The stem narrows in its middle part. The bowl seems to be wide, with a flat bottom. 2011.97.0128.jpg
L.2011.1.71 Fragment of a glass cylindrical stem, that narrows in the upper part, at the junction with the bowl, clearly separated. 2011.97.0151.jpg
L.2016.3.9 Base fragment of a flat bowl, with a part of the ring-shaped foot.
REDMG:1934.26.1 Small cup with rounded rim on a flaring lip that sharply joins a shallow bowl with bulging profile; two horizontal round handles, canted up, join at the broadest part of the bowl. The bowl has almost no stem but attaches directly to a raised ring base with diagonal profile, slightly convex resting surface, and slightly pointed underside. 2004.99.0896.jpg
REDMG:1934.51.8 Nearly conical shallow bowl, with a slightly incurving rounded rim, slightly convex side walls, and a thick, small foot, with straight sides on the exterior, tapered on the interior; pointed underside. For shape cf. CVA France 6 (Ensenere) pl. 22 and Lamboglia (Atti di I congr. Intrem di Studi Liguri (1950) 39, forma 26. 2004.99.0795.jpg
REDMG:1934.53.4 Broad flaring lip, convex on the upper surface, with a downturned rim, offset from a concave shallow bowl; hollow high stem offset from plate but spreading at the bottom into a disk foot, hollowed on the interior. 2004.99.0437.jpg
REDMG:1935.87.24 Convex and large. The vessel has an incurving rim, very convex outside and well marked off from rest of bowl. The transition from bowl to and from stem to foot is an unbroken curve.
REDMG:1951.133.1 Shallow ellipsoid bowl with rounded rim, underneath which are attached two horizontal round sections, curving up above the rim, rectangular in shape, and bent in at the tops. Deep angled ring foot, with a narrow, rounded resting surface, convex on the interior vertical surface, and flat on the underside.
REDMG:1951.134.1 Plain rounded rim, body nearly vertical at top and curving into a deep bowl, which narrows to a short stem attached to a disk foot with a rounded resting surface, small underside pointed at centre. Two horseshoe-shaped horizontal round handles, attached slightly below the rim. 2004.99.0768.jpg
REDMG:1951.1715 Rounded rim on incurving lip, curves into a top heavy bowl, with nearly straight, diagonal sides, above a short foot, flat on the underside; rounded interior. 2008.99.0268.jpg
REDMG:1951.1716 Rounded rim on incurving lip, curves into a top heavy bowl, with a slight carination in the lower third, beneath which the walls become slightly concave, above a flat base; rounded interior. 2008.99.0264.jpg
REDMG:1951.1717 Rounded rim on incurving lip, curves into a top heavy bowl; walls become slightly concave just above the flat base; rounded interior. 2008.99.0262.jpg
REDMG:1951.1718 Rounded rim on incurving lip, curves into a top heavy bowl that becomes slightly concave above the flat base; rounded interior. 2008.99.0259.jpg
REDMG:1953.25.38 Lekanis: slightly everted rim with diagonal flange, curves in to a shallow bowl; two flanged ribbon handles, attached horizontally just below rim; pronounced ring foot with vertical sides and raised underside. Lid: Moulded knob with deep circular depression; in centre of sloping lid, which steps down with three fasciae and then a convex lower part decorated with two incised bands; rounded rim. 2003.93.0102.jpg
REDMG:1953.25.45 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
REDMG:1953.25.46 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot. 2004.99.0631.jpg
REDMG:1953.25.47 Rounded everted rim on concave lip, below which are attached two horizontal round handles, oblong in shape, canted and slightly incurved, rising to just below the rim; deep bowl joins a spreading, lipped torus ring foot with a sloping resting surface.
REDMG:1953.25.72 Round uneven rim, lopsided diagonal walls, and a flat base; rough and bumpy on interior of bowl and base. 2004.99.0101.jpg
REDMG:1953.25.76 Shallow bowl with incurved rim; raised base, with grooved resting surface.
REDMG:1953.41.1 Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, slightly incurving. A short stem, slightly concave, attaches the bowl to a thick disk foot, convex on the underside (a continuation of the rounded resting surface) but hollowed through the middle of the stem. 2005.99.0133.jpg
REDMG:1958.117.1 Rounded, slightly incurving rim, which which rise (at slight angles) two high swung strap handles, rejoined at the bottom of the bowl in a continuous curve with the bottom of the bowl; between the handles, the bottom of the bowl is set off from the side walls. A flaring, broad ring foot is convex on the interior; the underside of the bowl is slightly convex. On the interior, the bottom of the bowl is offset from the side walls at a sharp carination. 2004.99.0885.jpg
REDMG:1958.13.1 Small bowl with inverted base and tiny rim. Tiny nub handle and five tiny points project from the rim.
REDMG:1958.16.1 Bowl with rounded body and no base. Wishbone handle and inward rim.
REDMG:1961.150.4 Hemispherical bowl, slightly indented at base, to which is attached a triangular handle with two prongs at the top. 2004.99.0856.jpg
REDMG:1964.1660 Thick rounded rim, slightly overhanging, above a baggy bowl that narrows sharply to a tapering, slightly concave pedestal foot, with a flat base. The interior of the bowl is concave at the centre. Some irregularities such as uneven edge of base.
REDMG:1964.1678 Rounded, slightly outturned concave rim; two horizontal round handles, pi-shaped, applied to the outside of the rim, with tops pressed down across the top; shallow bowl; flat base with wire comb or wire marks.
REDMG:2004.96.1 Palmette. Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, canted and slightly incurved, rising to just below the height of the rim. A short stem, slightly concave, attaches the bowl to a thick disk foot, with a groove at the outer edge of the vertical surface; broad, convex resting surface; hollowed through the middle of the stem. 2004.99.0960.jpg
REDMG:2004.97.1 Plain rounded rim; tapering walls, slightly concave, broaden slightly at the bottom of the bowl, which is moulded with two carinations; diagonal profile to bottom of bowl; tall cylindrical stem, slightly bulging at the middle, curves out to a flat disk foot, with rounded sides, but an indeterminate bottom. Two vertical strap handles swing up from the rim and rejoin the vase at the lower carination, where they comprise a smooth curve with the bottom of the bowl. 2004.99.0889.jpg
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH