Ure Museum Database



Browse
There are 89 objects for which Shape_description contains → broad
13.10.23 Elongated ovoid body, tapering at the bottom to a convex but nearly flat base and at the top, more gradually, to a very short neck with concave sides, then a broad rim, slightly concave on upper and lower sides, with a narrow mouth; two lugs (with wavy ridges), parallel to eachother, on either side of the vase, approximately 1/3 below the rim. 2008.03.0042.jpg
13.10.25 Broad, flat, rim; short neck; long body, widening towards base; almost conical base with small circular indentation in centre 2008.03.0033.jpg
14.9.5 Broad necked amphora with wide mouth; two handles descending from rim to rounded body; small, flat base 2003.92.0236.jpg
22.9.3 Cone shaped body. Vertical ring handles, ribbon. Broad duf-bottomed cap, spreading foot. Shallow depression inside in bottom (cf. CVA pl.19.1,2). 2003.29.0001.jpg
22.9.7 Broad concave rim; short neck flowing into bulbous body; crude, thick strap handle joins body from rim and shoulder; short foot; broad, flat base. 2003.97.0099.jpg
27.4.5 Rim turns sharply out, broad and flat on top. Handles rounded at far end and with upward twist. In centre of bowl a well 1.5 cm deep occupies the space interior of the stem. The foot appears in three stages, the first ridge being the narrowest, and the other two getting bigger in sequence. 2003.19.0007.jpg
29.11.2 Cup mouth. The top of the rim slightly curving upwards. Cylindrical neck. Strap single handle connecting the beginning of the neck with the shoulder. Shoulder curves slightly down to straight body. Broad torus ring foot. Underside flat except conical center. Cf. Smith 2003, BSA 98, p.360, footnote 26, pl. 59 a-b (see also 'Comments'). 2003.97.0743.jpg
29.4.2 Base flared with broad resting surface 2002.97.0513.jpg
45.10.1 High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder. 2004.99.0028.jpg
45.6.17 Flared mouth with flat lip. Handle starts halfway down neck, curves up and then down to join shoulder. Long, narrow body. Broad foot. Central concave section on base. 2003.12.0081.jpg
45.6.33 Outturned rim; tall thin neck leading into broad shoulder with two lugs opposite each other; almost vertically-sided body; flat base surrounded by very slight ridge. 2003.98.0028.jpg
45.6.37 Conical mouth with a thick, slightly convex rim, merging into a short, tubular neck, from the top of which emerges a thick strap handle that loops down to the bottom of the shallow sloping shoulder; ovoid body; broad torus ring foot. 2010.98.0160.jpg
47.2.3 Castulo cup: large stemless cup with inset lip. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising slightly over the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove. 2001.99.0135.jpg
47.2.5 Rounded thin rim, below which are attached two horizontal round handles, horseshoe-shaped; vertical wall curving into a shallow bowl, on a broad, flaring ring foot with a continuous concave interior surface from the underside through the resting surface. 2008.10.0013.jpg
47.2.6 Slightly flaring rim, flattened at the top, but sloping inwards; angled wall that curves sharply to a shallow bowl; horizontal, horseshoe-shaped strap handle, attached just below the rim and rising slightly above; broad torus ring foot. 2001.99.0123.jpg
47.2.7 Slightly flaring rim, flattened at the top, on an angled wall that curves sharply to a shallow bowl; horizontal strap handle, nearly triangular, attached just below the rim, rising slightly upwards; groove at the junction of body and broad ring foot, slightly convex at centre of underside. 2008.98.0404.jpg
47.6.2A-B Powder pyxis (with slip-on lid); for another Sam Wide powder pyxis see London, British Museum E 814 (from Tanagra), showing Herakles at the fountain.T he lid is cylindrical with a plastic ring on the top. The body is conical and the base is a broad, disk-shaped, flat ring. 2007.01.0019.jpg
47.7.1 Rounded rim, slightly outturned, below which are attached two horizontal round handles, u-shaped, slightly curving upwards; vertical wall curving into shallow bowl, on a broad, flaring ring foot with a convex underside. 2010.98.0265.jpg
48.12.10 Long tall neck from the top of which handle loops up and then down to join edge of broad shoulder, curning slightly upwards. Straight body; sturdy, flat foot; concave base. Cf. Smith 2003, BSA 98, p349, footnote 24, pl. 58 d-f (see also 'comments'). 2005.89.0029.jpg
48.12.4 Broad, flat rim; short neck the length of which runs the handle with a hole for suspension; inverted oviod body; rounded base. 2003.92.0261.jpg
49.12.1 Everted, nearly flat rim, with round lip, curves sharply to a cylindrical upper body, somewhat concave, separated from the lower body by a ridge above a flange. The lower body is comprised of four horizontal ribs, above a shallow bowl that narrows to a thin, short stem, that curves continuously into a conical foot, finishing with a broad groove above a rounded edge. The underside is hollowed. Two strap handles, which flare on either side, rise up above the rim and then descend to rejoin the body at the flange. A spur projects from the lower part of each handle, approximately in the middle of the upper body. 2008.98.0387.jpg
49.8.3 Very broad, up sloping rim; two handles start near the top of the body and curve vertically upwards; tall body with vertical sides curves down uninterrupted into stem; thick, flat foot with ridge at top; conical underside. 2004.04.0009.jpg
49.8.4 Flat-bottomed aryballos. Broad, flat rim; tall thin neck; vertical strap handle; rounded body; small footring; slightly convex base. 2008.99.0371.jpg
49.8.5 Broad, flat rim; short strap handle; body shaped rather like a bombylios, with moulded rings; small ring foot; concave base. 2003.97.0247.jpg
50.10.5 Incurving, rounded on the top rim; fairly deep bowl curves into thick low stem; two tiny grooves at join of stem and base; broad, flat foot; conical underside.
50.3.1 Flat rim; shallow mouth; broad neck; two handles curve upwards from near the bottom of the neck to the top of the body; small ridge between neck and shoulder; body tapers into broad, thick, flat base; underside concave. 2001.99.0017.jpg
50.4.12 Castulo cup': large stemless cup. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove. 2001.99.0131.jpg
51.1.3 Thick, wide rim with flat top, broad neck. Two rounded handles curve upwards from the top of the body to the neck, from the middle of which they continue in a broad, vertical strap handle to the rim. The body tapers into the narrower bottom and thick, wide base. 2005.88.0055.jpg
51.7.8 Cup mouth with slightly concave upper surface, tubular neck offset from mouth and shoulder; ridged vertical strap handle loops up from top of neck and descends directly to the shoulder; squat body; broad torus ring foot. 2003.97.0735.jpg
52.3.3 Broad flat rim; short thick neck; handles are comprised of two vertical bars joined at the rim by an overhanging horizontal bar with downward protrusions at either end; body tapers to conical footring; flat base. 2003.95.0050.jpg
56.8.5 Conical, almost acorn shaped knob sits on rounded ring; lid curves down to a ridge; broad, flat edge 2003.92.0217.jpg
60.1.2 Pagenstecher lekythos. (Restored rim); thin neck from the middle of which handle protrudes horizontally before sloping down to rounded body; broad foot; concave underside 2003.99.0039.jpg
60.1.3 Stemless cup with a plain rounded rim. Two horizontal round handles, oblong in shape, incurved and rising over the rim. Handles rise from half-way down the shallow bowl, which is divided from spreading, lipped torus ring foot by a broad groove. 2003.94.0022.jpg
60.1.5 Bell-shaped mouth with high outturned rim and broad, slightly convex lip;long neck widens to shoulder with smooth contour to ovoid body; vertical strap handle rising from top of neck and rejoining at bottom of shoulder; short ring foot. 2008.99.0786.jpg
61.6.1.9 Deep; rounded groove between body and broad foot 2008.99.0491.jpg
62.10.1 Tall vertical rim, with plain round lip, that turns into a barrel-shaped body on a short, broad foot ring, with flat resting surface and underside, with exterior wall comprised of a slanting element above a rounded element, and interior wall slanted . Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim. 2008.98.0333.jpg
69.7.1 Foot-shaped aryballos; Dohan Morrow's Group II, 'network sandals' (Dohan Morrow 1985, 6-9) or Ducat's type B foot-shaped vases (Ducat 1966, 182-84). Foot-shaped aryballos with a broad rim, short vertical strap handle, squared, offset neck; the body of the vase in the shape of a left foot, including ankle, with relief decoration that gives the effect of a sandal enclosing it, and a flat, reserved base. 2005.88.0054.jpg
71.6.3 Two thick, rounded, horizontal handles, one on each side just below rim. Broad body with near horizontal sides; torus ring foot 2008.99.0717.jpg
E.23.27 Broad shouldered jar with thin lip, broad neck, and body that tapers down to a conoidic foot which is slightly raised from the rest of the body. 2002.98.0190.jpg
L.2016.3.31 Ceramic figure of a camel, with raised head and straight posture. He is slightly craning his straightened head upwards, so that his broad neck is a little bent backwards. His eyes appear to be triangular but the iris is round. The mouth is slightly open. The saddle is just schematically depicted with a broad band surrounding the humps, both slightly tapering; the back hump is bent to the left, the front hump to the right. The tail leads down closed to his left leg. His legs are long and thin. There is a hole at the bottom of his rounded belly.
L.2016.3.7 Heavy Alabaster lid with slightly uneven rounded knob, which leads to a short stem. The stem curves into the diagonal lid with rounded rim and short, broad flange, slightly narrowing to its bottom. The underside is concave at centre.
L.2016.3.8 Wide opened mouth with rounded everted lip. The broad, concave neck curves into an almost diagonal shoulder. The body is slightly angled at mid-section and leads directly to the ovoid base.
REDMG:1926.99.50 Flaring broad lip, quite short, above a short neck which curves into a globular body, round bottomed. 2004.99.0952.jpg
REDMG:1926.99.52 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to an ovaloid body with rounded base; small round vertical handle is tucked in under the overhanging lip. 2004.99.0909.jpg
REDMG:1934.53.4 Broad flaring lip, convex on the upper surface, with a downturned rim, offset from a concave shallow bowl; hollow high stem offset from plate but spreading at the bottom into a disk foot, hollowed on the interior. 2004.99.0437.jpg
REDMG:1935.87.21 Broad projecting rim with flat lip, narrow cylindrical neck, sloping shoulders curving into an ovoid body, narrowing to a flat base; flat strap handle extends from the rim to the bottom of the shoulder.
REDMG:1935.87.25 Rounded rim on everted, slightly overhanging lip that curves into a short, broad neck; two vertical strap handles rise up from the neck and rejoin at the shoulder; smooth join to barrel-shaped body; short ring foot, concave on the underside by convex at the centre. 2005.89.0068.jpg
REDMG:1942.5.6.1 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to a globular body with rounded base; flat strap handle falls directly from the rim to the middle of the shoulder. 2003.97.0031.jpg
REDMG:1950.25.1 Type 8B oinochoe. Wide mouth with rounded, slightly overhanging rim flaring out from a broad neck, attached sharply to the top of the barrel-shaped body, with a moulded ring foot, with a vertical upper part and a grooved, slightly broadening lower part; narrow, flat resting surface; slightly concave underside. Two-piece handle, knotted at the top, splays at the attachment to the rim. 2003.93.0334.jpg
REDMG:1951.130.1 Oinochoe with trefoil lip. Broad neck, widening into grooved trefoil lip, from the back of which extends a vertical tripartite strap handle that reattaches at the middle of the shoulder; broad ridge at the bottom of the neck to which is attached the ovoid body, tapering to a broad ring base, convex on the exterior, with a flat resting surface. 2004.99.0353.jpg
REDMG:1951.140.1 Broad rim, slightly convex on upper surface, ridged at the outside edge, with overhanging lip; neck, concave in profile, broadens to a nearly flat shoulder that curves sharply to an ovoid body, which narrows sharply at the bottom, where it is joined to a moulded pedestal foot with a splayed base and concave underside; upper part of foot has tapering straight sides; the profile of the base is decorated with two ridges. Two incurving horizontal handles, round in sectiona, are attached to the upper third of the body; a vertical handle, also round in section, emerges from the top of the neck and curves down to the lower part of the shoulder. 2004.99.0808.jpg
REDMG:1951.141 Flaring rounded rim with flat lip, narrowing to a funnel-shaped body that curves sharply in the lower part to a broad stem that flares into a molded pedestal base, with a slanted exterior, ridged on the upper part, and a concave underside, pointed at the centre; two incurving horizontal round handles are attached just above the centre of the body.
REDMG:1951.142.1 Trefoil mouth attached at the back to a small strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy, bulbous body; broad, angled ring foot, rounded at the bottom, thin resting surface, slightly convex on underside. 2004.99.0702.jpg
REDMG:1951.144.1 Central well, surrounded by a ridge, rising to broad rim with overhanging vertical lip, tapering slightly in; on the underside the plate curves to a short, thick stem that broadens to a moulded foot, concave and flaring on the exterior surface, hollowed on the interior, with a flat resting surface, pointed at centre of plate. 2005.99.0120.jpg
REDMG:1951.147.1 Tall cylindrical neck offset from a squat body, with a curved shoulder, flange below the shoulder, concave side walls (offset at top and bottom), and a broader ring base, curved on the upper surface, with a broad resting surface, offset, slightly concave underside. From the front of the neck extends diagonally a tubular spout, squared at the end. From the back of the spout rises a high curving strap handle, rounded on the outside, which arches in a rectangular form, and descends sharply towards the lower part of the shoulder; which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. Two moulded male heads, bearded, are found on either side of the upper handle attachment. 2005.99.0048.jpg
REDMG:1951.148 Broad rim with slightly convex, tapering upper surface, and overhanging concave lip; rim joins on either side with diagonal spurs at top of round columnar handles (two either side), which descend at a slight diagonal to the shoulder. Broad neck, slightly concave, attached sharply to short curving shoulder from which an ovoid body descends and tapers to the foot. 2003.93.0266.jpg
REDMG:1951.150.1 Flaring rim, curving continuously from the exterior, with an overhanging, convex lip, curving on the underside into a short, thick neck that broadens to a baggy body, sharply joined to a broad pedestal foot, flat on the upper surface, convex on the vertical surface, and hollowed slightly interior, with a cyma molding leading up to a flat underside.The triple-ridged strap handles rise up from the sides of the neck and rejoin at the shoulders. 2005.99.0161.jpg
REDMG:1951.151.1 According to Trendall and Cambitoglou, RFVA 1.278.149, this is a special lekythos shape. Cup mouth, slightly flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the bulbous squat body; short ring base, rounded in profile, with narrow, flat resting surface and recessed underside; strap handle rises from the upper part of the shoulder, along the side of the neck and curves to rejoins at the lowest part of the shoulder.
REDMG:1951.154 Flaring flat, broad lip with convex upper surface and and concave lower surface, curving into a cylindrical neck; vertical ribbon handle emerges from the rim and rejoins the bottom of the neck at a bulge, below which is a conical body, with a rounded base, and a slight conical indentation at the bottom. 2005.99.0098.jpg
REDMG:1951.155 Flaring broad lip with flat upper surface, tapering rim, and concave lower surface; pinched neck to which is attached a small lug handle, with a suspension hole; neck broadens to a baggy, ovoid body, with a rounded base. 2005.99.0095.jpg
REDMG:1951.157.1 Cup mouth, flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the squat, high shouldered body, from which it is offset; tall but narrow ring base with rounded resting surface and slightly convex underside; strap handle rises from the side of the neck and rejoins at the lowest part of the shoulder.
REDMG:1951.158.1 Trefoil mouth attached at the back to a small, ridged strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy body; broad ring foot, squared in section, with a thin resting surface, slightly convex on underside. 2004.99.0782.jpg
REDMG:1951.160.1 Large krater with everted mouth and downturned rim, two recurved horizontal round handles attached to the upper part of the cylindrical body, which narrows to ashort, broad stem that curves into a pedestal foot, with a recessed band above slightly tapering sides, hollowed within. 2003.95.0072.jpg
REDMG:1953.25.13 Globular oinochoe of Archaic shape. Trefoil lip attached at the back to a broad strap handle, high swung and descending vertically to the middle of the shoulder; slight step at top of shoulder, below sharp join with cylindrical neck; squat body; broad, angled ring foot, with flat resting surface; slightly convex underside.
REDMG:1953.25.14 Trefoil mouth attached at the back to a high swung strap handle that reattaches near the bottom of the shoulder; short cylindrical neck with a ridge marking the join with the high-shouldered, squat, rounded body; broad, angled ring foot, slightly concave on underside. For large trefoil oinochoai see Corinth 13, 130-32 fig. 14
REDMG:1953.25.15 Trefoil lip attached at the the back to a broad, high curved strap handle that curves in slightly to the middle of the shoulder; short cylindrical neck joining stepped shoulder in a continuous curve; globular body curves into a short ring foot with diagonal resting surface and slightly concave underside.
REDMG:1953.25.20 Globular body of Archaic shape, with trefoil lip, high swung, broad ribbon handle, moulded ring just below neck, and shallow flaring ring foot.
REDMG:1953.25.26 Cup mouth with flat lip, slightly offset from narrow neck, which broadens to a nearly flat shoulder; thin strap handle rises from under the cup mouth and rejoins at the lower part of the shoulder; below carination is a conical body, with concave side walls, tapering down, and straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside. 2003.93.0394.jpg
REDMG:1953.25.27 Narrow cylindrical neck, broadens to a nearly flat shoulder; thin strap handle rises from the top of the neck and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside. 2005.99.0085.jpg
REDMG:1953.25.33 Central well, surrounded by a ridge and groove; walls rising to broad rim, just beyond a groove on the upper surface, with overhanging vertical lip, tapering slightly out; on the underside the plate is slightly convex and joins a short, thick, angled ring foot, with a tapering resting surface and a slightly convex, pointed underside. 2005.89.0008.jpg
REDMG:1953.25.35 Chimney mouth, bell-shaped, flaring at the top, with a broad rim, convex on the upper surface, and sloping in; the mouth is offset from a short neck that broadens toward the barrel-shaped body, from which it is also offset; thick disk foot, rounded in profile, with a thin resting surface, concave on the underside, pointed at centre; strap handle (missing) rose from the side of the neck and rejoined at the lowest part of the shoulder. 2001.99.0036.jpg
REDMG:1953.25.36 Flaring rim, with a flat lip on the upper surface, at the top of a tall neck with concave sides, alongside which is attached and rises a small strap handle (lopsided) that rejoins at the middle of the shoulder; sharply joins barrel-shaped body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside. 2003.93.0321.jpg
REDMG:1953.25.39 Flanged rim and tapering body, to which are attached broad horizontal strap handles (rounded but almost oblong in shape), slightly canted upwards, with spurs on either side. The lower body is offset from the handle zone, rounded in the lower part where it attached to thick stem broadening to a moulded foot, with spreading upper part, slightly concave, and a broader, rounded lower part, broadening towards the base, with a conical depression on the interior, and a narrow resting surface 2005.99.0148.jpg
REDMG:1953.25.43 Broad projecting rim with slightly convex lip; short narrow neck curving into a globular body with rounded base; flat strap handle extends from the rim to the middle of the shoulder.
REDMG:1953.25.49 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the middle of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base.
REDMG:1953.25.51 Upturned rim, slightly offset from the neck, which is cylindrical and nearly straight, joining an ovoid body, slightly baggy, supported by a broad ring base. Vertical strap handle, grooved, extends horizontally from the rim and curves back into the body, which it joins in the upper part.
REDMG:1953.25.52 Wide mouth with slightly concave lip, and a ridge from which descends a moulded, overhanging rim, which broadens. The rim is concave on the underside and curves into a broad neck that broadens to a piriform body. The vertical strap handle emerges from the rim and descends sharply to the bottom of the shoulder. The raised base is flat on the underside. 2004.99.0216.jpg
REDMG:1953.25.62 Broad mouth with thickened downturned rim. Slender neck sloping to a nearly horizontal shoulder, from which emerge two lug handles, just below a moulded band; finely ribbed body that tapers to a short raised base.
REDMG:1953.25.64 Narrow neck, nearly flat shoulder, curving to a broad body, tapering slightly down, to a slightly raised base, concave at the centre; two pinched triangular round handles rise from the edge of the shoulder, on opposite sides of the bottle. 2003.93.0227.jpg
REDMG:1953.25.65 Flaring broad lip with flat upper surface and a short rim curving into a cylindrical neck above a moulded ring, from which descends the conical body, narrowing slightly to a flat base, with a slightly bevelled edge.
REDMG:1958.111.1 Slightly flaring cup mouth, with a slightly convex upper surface; strap handle (lopsided) rises from the top of the neck and rejoins at the middle of the shoulder; cylindrical neck, broadening at the bottom, offset from the globular body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside. 2004.99.0928.jpg
REDMG:1958.117.1 Rounded, slightly incurving rim, which which rise (at slight angles) two high swung strap handles, rejoined at the bottom of the bowl in a continuous curve with the bottom of the bowl; between the handles, the bottom of the bowl is set off from the side walls. A flaring, broad ring foot is convex on the interior; the underside of the bowl is slightly convex. On the interior, the bottom of the bowl is offset from the side walls at a sharp carination. 2004.99.0885.jpg
REDMG:1961.199.1 Very narrow neck, from which loops up a small, narrow strap handle, which rejoins at the middle of the broad shoulder. The shoulder curves into a bulbous body, grooved just above a slightly raised base. The underside is slightly concave at its centre. Some circular ridges (comb ot wire marks) remain on the underside. 2004.99.0879.jpg
REDMG:1961.199.3 Continuously curving sides: flaring rim, rounded on the upper surface, broad cylindrical neck, nearly diagonal shoulders, ovoid body narrowing to a pinched stem, flaring base, flat (although rough and thus unstable) on the underside.
REDMG:1964.1622 Cup mouth with rounded rim, narrowing to a short neck, at the top of which is attached a small vertical strap handle that extends the lower part of the shoulder; wall curves continuously from neck, broadening to a slim ovoid body joined to a broad raised foot that is diagonal in profile; flat underside. 2004.99.0150.jpg
REDMG:1964.1624 Short, baggy oinochoe with pinched, flaring trefoil lip from the back of which rose a (high swung) vertical strap handle, broad neck and a globular body, slightly elongated at the back where the handle reattaches; rounded base. 2004.99.0139.jpg
REDMG:1964.1647 Large trefoil oinochoe. High swung strap handle emerges from below the trefoil mouth and reattaches at the middle of the shoulder; slightly concave neck with a step at the top of th the slightly sloping shoulder that curves continuously to a squat, rounded body; broad angled foot with slightly raised base.
REDMG:1998.153.4 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the bottom of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base and wire marks. 2004.99.0846.jpg
REDMG:2004.96.1 Palmette. Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, canted and slightly incurved, rising to just below the height of the rim. A short stem, slightly concave, attaches the bowl to a thick disk foot, with a groove at the outer edge of the vertical surface; broad, convex resting surface; hollowed through the middle of the stem. 2004.99.0960.jpg
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH