Ure Museum Database



Browse
There are 35 objects for which Shape_description contains → diagonal
23.11.1 Bowl with incurving rim, diagonal profile in lower body, and raised base. Previously described as lamp of kothon type. 2003.35.0082.jpg
34.10.7 Inslanting rim, with plain round lip, that curves into an ovoid body on a tall foot ring, with slanting interior and exterior walls, the latter curving to a flat resting surface, with flat underside. Two u-shaped handles, round in section, rise at a diagonal from the bottom of the shoulder to high above the rim. 2008.98.0461.jpg
44.6.1 Donut shaped body; rim turns in gradually; the remains of a ribbon handle protrude from one side of the rim; diagonal footring. 2003.35.0091.jpg
70.3.3 Ian McPhee describes it as a Kotyle rather than Skyphos type c (?). Tapering ring base, rounded at the bottom, from which the body rises in a sharp diagonal, curving sharply approximately at the halfway point, from which it rises near vertically and eventually flares slightly to a plain, rounded rim, just below which are attached two horse-shoe shaped handles, almost round in cross section. 2008.98.0449.jpg
L.2016.3.7 Heavy Alabaster lid with slightly uneven rounded knob, which leads to a short stem. The stem curves into the diagonal lid with rounded rim and short, broad flange, slightly narrowing to its bottom. The underside is concave at centre.
L.2016.3.8 Wide opened mouth with rounded everted lip. The broad, concave neck curves into an almost diagonal shoulder. The body is slightly angled at mid-section and leads directly to the ovoid base.
REDMG:1926.99.54 Chimney mouth (missing), offset slightly from a tall cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap handle arches up from just below the mouth and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, with a profile that is slightly convex; the slightly concave underside has a conical indentation at centre. 2003.93.0391.jpg
REDMG:1934.26.1 Small cup with rounded rim on a flaring lip that sharply joins a shallow bowl with bulging profile; two horizontal round handles, canted up, join at the broadest part of the bowl. The bowl has almost no stem but attaches directly to a raised ring base with diagonal profile, slightly convex resting surface, and slightly pointed underside. 2004.99.0896.jpg
REDMG:1935.87.1 Trefoil mouth at the back of which is attached an angular strap handle, that rises slightly and then descends sharply to join the lower shoulder; long neck that broadens gradually to a piriform body; short ring foot with rounded profile, flat resting surface, diagonal inside wall, and slightly convex underside. 2005.99.0060.jpg
REDMG:1951.131.1 Slim alabastron with narrow mouth, projecting rim, slightly convex on the upper surface, and beveled at the edge, flat on the underside; tall, slightly concave neck, offset from a tall ovoid body, with two small lug handles on the upper 1/4 of the body; molded pedestal foot is comprised of a tapering upper element broadening into a disk foot, with a diagonal outer surface, with three ridges, a flat resting surface, and a conical indentation on the underside. 2003.94.0080.jpg
REDMG:1951.132.1 Guttus type askos: swelling rounded body with bearing at the top a large relief medallion (frontal female mask with puffed cheeks and a lock of hair knotted over the forehead) offset and raised from the body; at a distance of ca. 0.5 cm are two incised lines beyond which the body is covered with fine vertical fluting down to its midpoint. A long diagonal spout with slightly concave sides rises obliquely from the shoulder below the medallion, and terminates in a three-stepped flanged mouth. A loop handle (semicircular in cross section) rises from the shoulder at a right angle to the spout. A tall thick foot, offset from the body, with a ridge at the halfway point broadens toward a ring base, slightly rounded on the exterior, with a concave underside offset from a concave element within the narrow resting surface. The foot is particularly tall, and is ridged in the middle: otherwise in shape this askos corresponds to Morel's type 8141h 1 (Morel 1981, pl. 209). 2004.99.0752.jpg
REDMG:1951.136.1 Moulded knob, topped by an offset beveled element with inset circle on upper surface; concave stem curves into a diagonal lid, with a slightly incurving lip, with a rounded rim. 2004.99.0633.jpg
REDMG:1951.138.1 Moulded rounded (‘mushroom’) knob, topped by beveled disk with inset circle, conical indentation on upper surface, surrounded by a groove; cylindrical stem offset from a to a slightly diagonal lid, with a moulded flange on the underside, concave at centre.
REDMG:1951.139.1 Moulded knob, topped by a slightly rounded element with inset circle and conical indentation, on upper surface; lower part of knob curves into a nearly cylindrical stem offset from a diagonal lid, with a tapered lip, with a plain rim. 2004.99.0643.jpg
REDMG:1951.143.1 Trefoil mouth at the back of which is attached a nearly L-shaped strap handle, that begins above the height of the mouth and descends to join the lower shoulder; short neck broadening to a piriform body, ribbed below the shoulder under shortly above the foot; short ring foot with flat resting surface, diagonal inside wall, and slightly convex underside. 2001.99.0005.jpg
REDMG:1951.148 Broad rim with slightly convex, tapering upper surface, and overhanging concave lip; rim joins on either side with diagonal spurs at top of round columnar handles (two either side), which descend at a slight diagonal to the shoulder. Broad neck, slightly concave, attached sharply to short curving shoulder from which an ovoid body descends and tapers to the foot. 2003.93.0266.jpg
REDMG:1951.1715 Rounded rim on incurving lip, curves into a top heavy bowl, with nearly straight, diagonal sides, above a short foot, flat on the underside; rounded interior. 2008.99.0268.jpg
REDMG:1953.25.15 Trefoil lip attached at the the back to a broad, high curved strap handle that curves in slightly to the middle of the shoulder; short cylindrical neck joining stepped shoulder in a continuous curve; globular body curves into a short ring foot with diagonal resting surface and slightly concave underside.
REDMG:1953.25.16 Trefoil mouth at the back of which is attached a hook-shaped round handle that begins above the height of the mouth and turns back to join the shoulder, with a slight spur; short neck curving into a baggy body in a continuous curve; short ring foot with narrow, rounded resting surface, diagonal inside wall, and pointed underside. Handle attachment is indicative of the Dotted Spray Group 2005.99.0090.jpg
REDMG:1953.25.25 Tall cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap handle rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering gently towards the base, which is attached to a moulded pedestal foot, tapering down, with a profile that is slightly convex; the underside has a conical indentation at centre. 2003.93.0393.jpg
REDMG:1953.25.30 White-ground lekythos, group iii. Conical mouth with flat rim, slightly offset from cylindrical neck which curves sharply into nearly diagonal shoulder; vertical strap handle (missing) reached from top of neck to bottom of the shoulder, below which a carination marks the join with the straight body that tapers down to a high, molded, pedestal foot, grooved at the top of the slightly convex vertical surface, concave on the underside, with a nipple at the centre.
REDMG:1953.25.38 Lekanis: slightly everted rim with diagonal flange, curves in to a shallow bowl; two flanged ribbon handles, attached horizontally just below rim; pronounced ring foot with vertical sides and raised underside. Lid: Moulded knob with deep circular depression; in centre of sloping lid, which steps down with three fasciae and then a convex lower part decorated with two incised bands; rounded rim. 2003.93.0102.jpg
REDMG:1953.25.54 Wide-mouthed mug. Rounded outturned rim, narrowing at the neck and broadening to a baggy body, in a continuous curve down to the thick torus ring foot, with a thin resting surface, diagonal element, and offset underside; a vertical loop ribbon handle is tucked in just below the rim where it adjoins the upper half of the body.
REDMG:1953.25.69-70 Moulded knob, topped by an offset beveled element with inset circle on upper surface, with a two-part profile, convex on the upper part; concave stem curves into a diagonal lid, with a slightly incurving convex lip that terminates in a rounded rim. 2007.02.0002.jpg
REDMG:1953.25.72 Round uneven rim, lopsided diagonal walls, and a flat base; rough and bumpy on interior of bowl and base. 2004.99.0101.jpg
REDMG:1958.112.1 Cup mouth with flat rim, tall cylindrical neck, slightly widening at the top, curving into a diagonal shoulder, below which (from a carination) the body tapers slightly, and then curves sharply to join a tall moulded base, with straight sides, slightly concave on the underside, with a cylindrical depression; a vertical strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination. 2004.99.0934.jpg
REDMG:1961.199.3 Continuously curving sides: flaring rim, rounded on the upper surface, broad cylindrical neck, nearly diagonal shoulders, ovoid body narrowing to a pinched stem, flaring base, flat (although rough and thus unstable) on the underside.
REDMG:1962.184.33.21 Cup mouth on cylindrical neck, slightly narrowing and then curving to a slightly diagonal shoulder; narrow strap handle extends from the middle of the neck to the bottom of the shoulder, just above a carination, from which descends the nearly straight side walls; body narrow sharply at the bottom to a short stem attached to a tall moulded base, which tapers down. 2004.99.0872.jpg
REDMG:1964.1622 Cup mouth with rounded rim, narrowing to a short neck, at the top of which is attached a small vertical strap handle that extends the lower part of the shoulder; wall curves continuously from neck, broadening to a slim ovoid body joined to a broad raised foot that is diagonal in profile; flat underside. 2004.99.0150.jpg
REDMG:1964.1626 Trefoil mouth attached at the back to a high-swung vertical handle (missing) that reattached at the bottom of the diagonal shoulder; below carination, body bulges and then tapers to a flat base, slightly concave on the underside. For tall trefoil oinochoai see Corinth 13, 131 fig. 14, 133, e.g. Corinth T1298-99: Corinth 13, 312 nos. D 49-f-g, pl. 57. 2004.99.0156.jpg
REDMG:1964.1649 White-ground lekythos, group iii. Tall cylindrical neck broadening to a diagonal shoulder. Vertical strap handle rises from top of neck to bottom of the shoulder, where it broadens. Below the handle attachment a carination marks the join with the straight body, which narrows at the base to a molded pedestal foot with a slightly concave outer edge, convex underside, indented in the centre.
REDMG:1964.1663 Rounded, slightly raised rim; two pinched round horizontal handles, round in section, rise at a diagonal from the sloping shoulders which curve gently down to a small raised base, concave on the underside. 2003.93.0363.jpg
REDMG:2004.95.1 Phanyllis shape: Cup mouth with flat lip, cylindrical neck broadening to a diagonal shoulder; strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination, from which descends an ovoid body that narrows at the bottom to a flat disk foot, with a conical depression at the centre of the underside. 2004.99.0868.jpg
REDMG:2004.97.1 Plain rounded rim; tapering walls, slightly concave, broaden slightly at the bottom of the bowl, which is moulded with two carinations; diagonal profile to bottom of bowl; tall cylindrical stem, slightly bulging at the middle, curves out to a flat disk foot, with rounded sides, but an indeterminate bottom. Two vertical strap handles swing up from the rim and rejoin the vase at the lower carination, where they comprise a smooth curve with the bottom of the bowl. 2004.99.0889.jpg
REDMG:2004.98.1 Cup mouth, with a slightly convex upper surface; tall cylindrical neck, from which rises a thin vertical strap handle, that rejoins the diagonal shoulder just above the carination; straight sides, taper gently towards the base, to which is attached a molded pedestal foot, slightly concave on the underside, with a cylindrical depression at centre. 2004.99.0926.jpg
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH