Ure Museum Database



Browse
There are 54 objects for which Shape_description contains → everted
34.2.2 Small hydria with plain everted rim, with a round lip, curving continuously to a narrow concave neck and a sloping shoulder, then an ovoid body attached to a short disk foot, tapering on both exterior and interior, with a flat resting surface and a pointed underside. The vertical strap handle, slightly concave on its outer side, reaches from the lip to the widest part of the body, where it curves into the shoulder. Two horizontal d-shaped, upcurving handles, round in section, also rise up from the join of the shoulder and body. 2002.97.0658.jpg
39.8.1 Stemless cup-skyphos with an offset lip terminating in a rounded everted rim; moulded foot comprised of concave element above convex element, interrupted by a ridge at the top. 2003.93.0335.jpg
45.3.1 Everted rim below which is attached a pinched handle with a string hole; elongated piniform body. 2003.39.0002.jpg
47.10.3A-B Lid: tall, conical, flat-topped knob on a sharply sloping conical lid, with plain rim, vertical profile, flat underside, leading to a short flange (0.3) to sit within lekanis. Lekanis: slightly everted, rounded rim with flat lip, on a deep bowl with straight walls in two parts, separated by a sharp carination near the bottom, attached to a short disk foot, angled on inside and out, with a slightly convex underside. From either side of the rim extends a semicircular horizontal handle, round in section, that rises very slightly, flanked by short pointed spurs or lugs on either side of the handle. 2010.98.0012.jpg
47.2.8 Thickened, slightly everted rim, surmounts a wide shallow bowl; ring torus foot. 2001.99.0128.jpg
47.6.4 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in centre. 2008.99.0577.jpg
47.6.5 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in the centre. 2002.97.0491.jpg
49.12.1 Everted, nearly flat rim, with round lip, curves sharply to a cylindrical upper body, somewhat concave, separated from the lower body by a ridge above a flange. The lower body is comprised of four horizontal ribs, above a shallow bowl that narrows to a thin, short stem, that curves continuously into a conical foot, finishing with a broad groove above a rounded edge. The underside is hollowed. Two strap handles, which flare on either side, rise up above the rim and then descend to rejoin the body at the flange. A spur projects from the lower part of each handle, approximately in the middle of the upper body. 2008.98.0387.jpg
50.10.2 Slightly everted lip with nearly flat rim, on a cylindrical bowl with concave sides, divided with a a sharp carination from a convex lower that smoothly curves into a short stem on a rounded foot ring, with rounded resting surface, tapering inner wall, and nearly flat underside. Two suspension holes are arranged horizontally just below the rim on one side. 2008.98.0344.jpg
50.12.29 Fragment of rim from an open vessel with slightly everted rim. 2003.98.0090.jpg
50.3.2 Tall and slightly lopsided. Steep angled wall with a slightly everted rim and a ridge just below; two ridges at bottom of wall, including join with slightly sloping floor; another ridge marks the join with the cylindrical stem, slightly broadening at the bottom; two ridges mark the join with the trumpet-shaped base. Offset on interior at join of wall and floor. Base conical on underside. 2003.97.0304.jpg
50.4.10 Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside. 2008.99.0771.jpg
51.1.4 Slightly everted lip with rounded rim, on a deep plate that is convex at the upper part and then curves, with a near carination to become concave in the lower part, on a flat base that is beveled on the outer part. A single suspension hole is on the lip. 2004.02.0009.jpg
54.2.2 Everted lip; thin, tapering neck; strap handle curves down from rim to spherical, bulbous body; slightly raised flat foot. 2008.98.0329.jpg
59.6.1 Everted, concave rim, with round lip, offset by a carination from a shallow bowl, tapering sharply to a short stem that broadens to a moulded foot, concave in profile, with a nearly flat resting surface, grooved just within the resting surface, hollowed and conical within; a slightly incurving d-shaped handle rises up, on either side, from the centre of the bowl to the height of the kylix. 2010.98.0333.jpg
61.6.3 Everted lip with rounded rim, curving out to a short shoulder, then tapering to a conical, deep bowl, with short stem that broadens to a flat, disk foot, with tapering, slightly rounded exterior, gougedresting surface, slightly concave interior, and slightly convex underside. From either side, just below the rim, a u-shaped handle, round in section, rises up to just above the top of the rim. 2010.98.0338.jpg
70.3.2 Slightly everted rounded rim. 2003.98.0234.jpg
81.9.1 Rounded, everted rim, long neck, piriform body, ring foot. Thick strap handle curves up from the middle of the thick neck and down to the shoulder. 2010.99.0044.jpg
E.23.24 Squat jar with rounded everted lip, short neck, and rounded base. 2002.98.0211.jpg
E.23.25 Slightly everted lip, wide neck, bulbous body, and everted pedestal foot with concave base. 2006.20.0003.jpg
E.23.26 Everted lip attached to long straight neck, shallow but wide upper body. Lower body gently tapers to an everted foot with a concave base. Handle attaches to just below the top of the neck and rejoins the body at the widest point of the body. 2007.01.0059.jpg
E.23.28 Everted lip, carinated body, and pointed foot. 2002.98.0209.jpg
L.2016.3.10 Miniature dimension. Round, outwards bulged ceramic disc, with very slightly everted, rounded rim and a moulded face at centre of the exterior. A small curved handle, running in a straight line, is attached to the rim and ends at the back side of the left forehead area and the right chin area.
L.2016.3.8 Wide opened mouth with rounded everted lip. The broad, concave neck curves into an almost diagonal shoulder. The body is slightly angled at mid-section and leads directly to the ovoid base.
REDMG:1935.87.25 Rounded rim on everted, slightly overhanging lip that curves into a short, broad neck; two vertical strap handles rise up from the neck and rejoin at the shoulder; smooth join to barrel-shaped body; short ring foot, concave on the underside by convex at the centre. 2005.89.0068.jpg
REDMG:1951.153.1 Askos in the shape of a duck, with an everted rounded rim on a short cylindrical neck, from the back of which rises a strap handle that curves down to join the vase just above the tail. 2005.90.0025.jpg
REDMG:1951.156.1 Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem. 2004.07.0008.jpg
REDMG:1951.160.1 Large krater with everted mouth and downturned rim, two recurved horizontal round handles attached to the upper part of the cylindrical body, which narrows to ashort, broad stem that curves into a pedestal foot, with a recessed band above slightly tapering sides, hollowed within. 2003.95.0072.jpg
REDMG:1951.161.1 Overhanging everted lip with rounded rim curves sharply a near cylindrical body, narrowing to a tapering stem, which in turn is joined to a hollowed, moulded pedestal base;.the upper surface of the base is nearly flat, surrounded by a ridge and then a groove from which the nearly vertical sides descend; two incurving round horizontal handles are attached just above the middle of the body. 2005.90.0006.jpg
REDMG:1951.1707 Everted rounded rim, from the back of which extends a round vertical handle that reaches to the middle of the biconical body with a flat, rough base. 2004.99.0402.jpg
REDMG:1951.1708 Everted rounded rim, from the back of which rises a round vertical handle that joins the body at the middle of the slightly baggy body with a flat, rough base.
REDMG:1951.1714 Rounded, slightly everted rim on slightly concave lip, slightly convex lower walls curve into a short foot, with a flat base.
REDMG:1953.25.2 Rounded, slightly everted rim, below which are attached two horizontal handles, rounded on the outsides and slightly flattened on the insides, slightly canted and rising above the rim. Body bulges slightly below handles but otherwise tapers gradually to a thick raised base, which is slightly broader than the lowest part of the body. The underside is circumscribed with a lightly gouged band. 2005.99.0144.jpg
REDMG:1953.25.22 Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, slightly flaring at the shoulder, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, comprised of a scotia above a torus; the flat base has a conical indentation at centre. 2005.99.0074.jpg
REDMG:1953.25.38 Lekanis: slightly everted rim with diagonal flange, curves in to a shallow bowl; two flanged ribbon handles, attached horizontally just below rim; pronounced ring foot with vertical sides and raised underside. Lid: Moulded knob with deep circular depression; in centre of sloping lid, which steps down with three fasciae and then a convex lower part decorated with two incised bands; rounded rim. 2003.93.0102.jpg
REDMG:1953.25.47 Rounded everted rim on concave lip, below which are attached two horizontal round handles, oblong in shape, canted and slightly incurved, rising to just below the rim; deep bowl joins a spreading, lipped torus ring foot with a sloping resting surface.
REDMG:1953.25.57 Cup mouth with slighted everted, rounded rim, concave lip, narrows to neck, which flares to a top-heavy body; round vertical extends horizontally from the rim and descends in slight s-curve to the shoulder; slightly raised base with flat underside, worked with spiral pattern grooved in.
REDMG:1958.23.1 Wide body that tapers at the bottom towards a slightly convex base. The rounded base forces the jug to lean to one side. The tall narrow neck has an everted rim. Single, wide flat strap handle joins the base of the rim and the shoulder.
REDMG:1958.33.1 Jug with bulbous body with delineated flat base. Single strap handle joins the upper body to the centre of the long neck with a funnel-shaped mouth ending with an everted rim.
REDMG:1958.37.1 Jug with ovoid body and everted rim and slightly concave circular foot. Single strap handle joins rim to centre of the body.
REDMG:1964.1154.1 Outturned rounded rim , narrowing to a nearly cylindrical body (broadens slightly below) that narrows sharply to a short, nearly cylindrical stem, attached to a pedestal foot, hollow within, slightly angled on the upper surface, nearly vertical on the sides, flaring to a slighted everted base, with a rounded resting surface 2004.99.0831.jpg
REDMG:1964.1621 Wide mouth with moulded, slightly concave lip, and slightly everted rim, below which the short vertical strap handle emerges, bends, and descends to the shoulder. Globular body attached to an angled ring foot. Shape similar to Corinthian round-mouthed oinochoe, type B (cf. Corinth 13, fig. 14), but with a slightly concave lip, and more globular than Corinth T1712: Corinth 13, 228 no. 296-2, pl. 41. 2008.99.0225.jpg
REDMG:1964.1661 Everted rounded rim with flat upper surface, tapering to a narrow neck that broadens to a piriform body, conical in the lower part, on a tall, slightly flaring foot, with a flat resting surface and conical depression with a nipple at the center. 2004.99.0605.jpg
REDMG:1964.1662 Everted rim with concave upper surface narrow to biconical body, slightly narrower towards flat base, which preserves comb or wire marks.
REDMG:1964.1668.1 Unguent Jar. Miniature amphora with an everted rim, long and narrow neck, and foot with a concave base. Handles on either side and completely attached to the upper body. 2003.93.0254.jpg
REDMG:1964.1669 Rounded everted rim; sides comprised of two concave parts, the upper one larger; flat base. 2003.93.0256.jpg
REDMG:1964.1670 Rounded everted rim; sides comprise two concave parts, the upper one larger; groove inside mouth, approximately 1.0 cm below rim; flat but uneven base with comb or wire marks. 2004.99.0081.jpg
REDMG:1964.1671 Rounded everted rim; sides divided into two concave parts, the upper one larger; flat base with comb or wire marks. 2004.99.0078.jpg
REDMG:1964.1672 Rounded everted and very uneven rim; sides comprise two concave parts, the upper one larger; flat base with comb or wire marks. 2004.99.0061.jpg
REDMG:1964.1673 Rounded everted rim tapering to nearly cylindrical sides; flat base.
REDMG:1964.1674 Flat rim on everted lip, slightly concave on the interior; nearly straight sides which taper sharply to a flat base; (lug) handles. 2003.93.0373.jpg
REDMG:1964.1676 Everted rim, slightly concave on the interior, concave walls broadening to a carination from which the sides taper sharply to a flat base. 2004.99.0503.jpg
REDMG:1964.1699.1 Everted rounded rim which tapers to a short neck and then broadens to a body with nearly vertical sides, slightly tapering to a flat base; round vertical handle, twisted, extends from the rim to the shoulder. 2004.99.0386.jpg
REDMG:1964.1707.1 Everted thickened and rounded rim, from the back of which extends a round vertical handle that joins the body at the middle of the biconical body with a flat, rough base.
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH