Ure Museum Database



Browse
There are 385 objects for which Shape_description contains → handle
13.10.10 Fragment. Neck and handle of vase. 2008.03.0032.jpg
13.10.12 Body almost cylindrical, pointed at bottom. Short neck, trefoil lip, handle that joins the shoulder an the lip. 2007.99.0135.jpg
13.10.17 Barrel-shaped jug, deep-spreading lip, half has broken away. One handle, with a raised area along the middle. Clay on body rounded into a point in the middle of either side. 2003.92.0048.jpg
13.10.21 Course jug with fat body, thick rim. The single handle reaches from the neck beneath the rim to the shoulder of the jug. The neck is as wide as the mouth, then tapers inwards slightly to meet the body, the ring foot is short and quite wide. 2010.99.0070.jpg
13.10.22 Fat Body, narrow neck leading to an out turned rim. One handle join the shoulder of the vase to the neck directly beneath the rim. Low ring foot 2008.99.0280.jpg
13.10.3 Nearly rectangular piece, bilaterally symmetrical, with a raised rib down the centre, two parallel rivets, one on either side, at the shoulder, just above the tang (where the blade may have been socketed into a wooden handle. The thickness is uniform for most of the length of the dagger. ) 2008.99.0121.jpg
14.9.1 Deep bowl with slightly pinched in, uneven rim; wishbone handle; body tapers to flat base. Typical Late Middle II-Cypriot I shape (perhaps near carination suggests something earlier). 2002.98.0197.jpg
14.9.2 Fat body, long bottle neck with spreading lip, large U-shaped handle. Two moulded rings round neck at junction with handle. Foot conical. Cf. Sydney, Nicholson 52.418 (with shorter foot and more relief decoration) 2010.99.0056.jpg
14.9.3 Alabastron-shaped jug with one handle that joins the rim to the upper body and a delineated flat base. 2008.99.0106.jpg
14.9.52 Two fragments forming an irregular shaped piece from handle zone of three-handled jar, with the stump of broken handle. 2003.01.0002.jpg
14.9.64 Rectangular with base of handle sticking out near top. 2006.20.0314.jpg
14.9.76 Fragment; perhaps start of handle at left. 2003.20.0087.jpg
2003.6.19 Single fragment from near the attachment of a handle. 2007.03.1216.jpg
2005.3.35 Fragment of bird kylix rim and handle
2005.3.36 Fragment of a bird kylix handle and rim 2006.20.0391.jpg
2006.12.101 Small vessel with two very small handle like protrusions 2007.03.0993.jpg
2006.12.103 4 small protrusions, roughly evenly spaced. 2 seem to be from a broken handle. 2007.03.1002.jpg
2006.12.104 Fragment of small vessel with base, body and one handle.
2006.12.105 Fragment of rim with part of a handle 2007.03.1006.jpg
2006.12.112 Fragment of base or stand of vessel, with handle attached
2006.12.113 Fragment with part of handle
2006.12.115 Fragment with part of broken handle 2007.03.1059.jpg
2006.12.122 Fragment with stub of handle
2006.12.125 Fragment possibly of handle; long thin shap which branches into two thinner broken, curved projections.
2006.12.16 Fragment of handle 2006.78.0028.jpg
2006.12.18 Fragment of rim; with handle previously attached 2007.03.0899.jpg
2006.12.19 Fragment of handle 2005.02.0359.jpg
2006.12.20 Fragment of rim or lid with part of handle 2007.03.0887.jpg
2006.12.32 Two bumps possibly from broken handle 2007.03.0968.jpg
2006.12.66 Fragment with handle attached
2006.12.67 Fragment with handle 2007.03.1098.jpg
2006.12.7 Fragment of rim, possibly with broken off handle 2007.03.0861.jpg
2006.12.93 Very small open vessel with single handle, another handle has been broken off. Size suggests unlikely to have been functional.
2006.12.94 Very small veseel or lid of some sort, unlikely to have been functional. Two small handle like protrusions.
2006.12.97 Small, shallow vessel with handle, possibly originally had a second handle that has since been lost. 2007.03.0995.jpg
2007.4.103 Fragment of handle 2007.03.0605.jpg
2007.4.106 Fragment is possibly part of a handle 2007.30.0022.jpg
2007.4.108 Small vessel with handle, could be lid of some sort 2007.30.0009.jpg
2007.4.116 Fragment of rim with part of handle attached 2007.30.0014.jpg
2007.4.117 Shape suggests fragment of rim with part of handle still attached 2007.30.0029.jpg
2007.4.124 Fragment with part of broken handle 2007.30.0047.jpg
2007.4.132 Fragment from handle 2006.78.0040.jpg
2007.4.148 Fragment of handle
2007.4.15 Perhaps a handle
2007.4.166 Shard of a pot handle: curved
2007.4.17 Perhaps from a handle, or rim.
2007.4.175 Curved pot shard- part of handle coming off
2007.4.181 Curved pot shard with a handle
2007.4.197 Fragment of corded handle
2007.4.201 Fragment with small part of rim and broken handle attached
2007.4.215 Fragment from side of pot, but with very end of handle attached
2007.4.25 Fragment of handle 2007.03.0128.jpg
2007.4.26 Fragment from handle 2007.03.0118.jpg
2007.4.34 Fragment, possibly handle 2007.03.0190.jpg
2007.4.42 Fragment from handle 2007.03.0116.jpg
2007.4.44 Fragment from handle 2007.03.0149.jpg
2007.4.50 Fragment from rim, possibly used to have handle attached 2007.03.0183.jpg
2007.4.52 Fragment from base of handle 2007.03.0188.jpg
2007.4.71 Fragment of handle with bit of rim 2007.03.0669.jpg
2007.4.74 Fragment with part of handle 2007.03.0726.jpg
2007.4.79 Part of large handle ? 2007.03.0718.jpg
2007.4.81 Fragment with part of handle 2007.03.0618.jpg
2007.4.82 Fragment of handle 2007.03.0652.jpg
2007.4.83 Fragment of a handle
2007.4.88 Fragment of handle 2007.03.0640.jpg
2007.4.94 Axe head like shape, could be broken off handle 2007.03.0681.jpg
2008.7.1 U-shaped strap handle attached to a rim fragment
2008.7.101 Part of neck, handle, shoulder, body
2008.7.116 Hexagonal shaped fragment with remnants of rim; remnants of handle base on exterior
2008.7.121 Triangular shaped handle fragment
2008.7.123 Trapzoidal fragment with a small pierced cylindrical handle on the rim (for string?)
2008.7.130 Long rim fragment, slightly curving but steeply angular on exterior of fragment. Almost a long pyramid in shape, with a curved base.Small rounded handle on one broken edge.
2008.7.135 Rim fragment with handle; exterior has a handle with a hole through it, possibly to put string through
2008.7.158 Trapezoidal curved handle fragment.
2008.7.160 Handle fragment
2008.7.29 Narrow thin handle fragment.
2008.7.3 Rectangular fragment thicker at one end and curved sharply at the other. Possibly a handle fragment.
2008.7.35 Irregularly shaped rim fragment; fragment is narrowest up near the rim, then broadens down towards the shoulder, and has broken off near the transition from shoulder to body. Possible point where handle was attached
2008.7.42 Handle fragment from possibly near the base of handle
2008.7.99 Gently curving rectangular handle fragment.
2008.9.35 Long narrow handle fragment
2009.7.99 Gently curving rectangular handle fragment.
2016.3.1 Round body, convex shoulders and concave discus with a regular filling hole, roughly at the lower end of the discus; short round nozzle, leading convexly to the base, and round tip with ovoidal wick hole at centre. Vertical round handle, raising up at rear part of the shoulder. 2016.01.0013.jpg
2016.5.1 Projecting disc-shaped rim with rounded lip from which emerges a short tubular neck which curves into a globular body with a flat bottom. A narrow strap handle curves to the shoulder. The bottom of the vase has a small flat recess in the centre. 2016.01.0001.jpg
2016.5.3 Flaring mouth, wide elongated conical neck, separated from a large ovoid body by a moulded groove. Small round foot. Handle is missing. 2016.01.0031.jpg
22.3.20 Moulded overhanging rim in three sections, reaching to the point of attachment of the handle on the front of the fragment. 2007.03.1169.jpg
22.3.40 Downturned molded rim, from which projects the horizontal element of a ridged strap handle that curves back in and descends to the shoulder. Body drops sharply from shoulder and tapers to raised base. Cf. several examples in Lipari 2, esp. Lipari 2, 138, pl. CXXXVI.4a (tomb 385, 'stile Gnathia') 2003.37.0005.jpg
22.3.42 Open lamp with wide, shallow, circular body, with curved shoulder and a down turned rim. covered flat nozzle with a large oval wick hole. Horizontal band handle which follows the back of the body. Foot is shallow and slightly concave 2004.95.0093.jpg
22.9.5 Sphere with base and one side handle still present. Only half intact with one side handle. Other handle and some other pieces with it but just fragments. Base of cup badly chipped. Underside of cup's base is inverted. 2003.29.0010.jpg
22.9.7 Broad concave rim; short neck flowing into bulbous body; crude, thick strap handle joins body from rim and shoulder; short foot; broad, flat base. 2003.97.0099.jpg
25.6.3 Chimney mouth with flat rim; single curved handle; base has central concave section; foot double stepped. 2011.98.0106.jpg
25.6.7 Rounded handle with small flat part sticking out at part furthest from main pot 2006.20.0538.jpg
25.8.5 The handle is in three tiers, with a point at the tip. 2002.97.0271.jpg
25.8.6 Handle is small and joined from shoulder to neck. Shallow cup mouth. 2003.11.0003.jpg
25.9.3 The rim is wide and sloping, the handle is double, of ellipsoid cross-section and forms an intense curve against the body, which is ovaloid and inflated. The base is ring-shaped and narrower than the rest of the vessel. 2003.31.0095.jpg
26.12.13 Trefoil lip from which a handle curves down to the top of the bulbous body. Deep groove separates body from wide foot. Resting surface slightly concave. 2003.97.0873.jpg
26.12.14 Trefoil lip. Strap handle curves down from rim to shoulder. Bulbous body. Resting surface slightly concave 2003.44.0005.jpg
26.12.19 Single curved handle. Foot in two degrees, top; base has central concave section. 2003.12.0082.jpg
26.12.26 Trefoil lip oinochoe with a banded handle that bears a ribbed back. The body is ovaloid and the foot is conical with a round base. 2003.36.0009.jpg
26.12.8 Piriform, with a small handle. 2007.01.0026.jpg
26.2.57 Fragment: Handle plate and top of handle 2005.02.0480.jpg
26.2.63 Fragment bulging at handle zone.
26.2.84 Large fragment preserving a complete handle and partial shoulder of a vase. 2005.02.0453.jpg
26.2.89 Fragment of handle plate 2005.02.0445.jpg
26.7.8 Bulbous body, wider in the lower part. Projected rim with a very small discus area leading to a irreguar filling hole. Long nozzle with a wide, flat, oval wick hole. Applied strip handle attached to the rim and reaching down to the base. Flat unmarked base. Tall indentation on the left side of the body. 2002.97.0553.jpg
26.8.1 Central vertical handle reaches across middle of vase. 2003.97.0768.jpg
27.4.1 Deep ovoid bowl with concave rim and rounded lip, narrowing to a disk foot, rounded on the exterior, sharply beveled on the interior, with a flat resting surface and a slightly convex underside. On either side a u-shaped handle, round in cross-section, rises up from just below the rim, top the height of the lip. There is a slight groove at the join of body and foot. 2010.98.0197.jpg
28.6.1 Flat, trefoil mouth with single curved handle. 2011.98.0057.jpg
28.6.5 Neck extends up from the side of the piece, approximately one quarter of the way round from the handle, flaring into mouth. 2003.36.0006.jpg
28.9.1 Mouth flares out and rim is flat. High vertical handle joined to rim with surs either side. Body has two horizontal handles. Base has central convex circle. 2003.44.0002.jpg
29.11.2 Cup mouth. The top of the rim slightly curving upwards. Cylindrical neck. Strap single handle connecting the beginning of the neck with the shoulder. Shoulder curves slightly down to straight body. Broad torus ring foot. Underside flat except conical center. Cf. Smith 2003, BSA 98, p.360, footnote 26, pl. 59 a-b (see also 'Comments'). 2003.97.0743.jpg
29.11.3 The mouth is chimney-like, the handle banded, the body is conical and the foot is disk-shaped. 2004.07.0097.jpg
29.11.8 Flaring, slightly convex rim with rounded lip, smoothly joins a short, straight-sided cup that curves sharply to a slightly offset resting surface, slightly concave. A single strap handle curves arches between the walls of the basket on the inside. 2008.99.0397.jpg
29.5.3 Ball aryballos with a disk-shaped wide rim, a vertical banded handle and a spherical body. 2003.57.0088.jpg
33.4.3 The mouth is tall and conical, the back of the handle is inflated and the foot is disk-shaped. 2001.99.0009.jpg
34.10.10 Gill's 'Pheidias shape'. Wide mouth with a flat rim. The handle is in two pieces branching out sideways along the rim at the top. Base is flat. 2003.97.0476.jpg
34.10.11 Rounded body narrowing toward base. Small round handle. Spout protruding from the top. Lid with round knob handle. 2003.35.0083.jpg
34.10.13 Squat lekythos. Flared mouth with flat rim. Thin neck with single curved handle attached at top and finishing at shoulder. Ridge separates the neck from the shoulder. Cf. Agora 12 part 2, no. 1138, pl. 38 2003.97.0474.jpg
34.10.15 Gourd-shaped vessel, with an elongated ovoid body tapering into a cylindrical handle that finally terminates in elongated, rounded tip. Pierced in the bottom of the ovoid part, and ca. 2 cm from the tip. Use as a rattle is indicated by the sound of a pebble inside. 2004.95.0115.jpg
34.10.2 Round ('ball aryballos'). Wide flat rim to mouth with thin neck. Single handle. 2003.04.0001.jpg
34.10.9 Hellenistic jug with twisted rope handle. Handle extends from shoulder to where grooves are at the top of the neck. 2002.97.0663.jpg
34.2.2 Small hydria with plain everted rim, with a round lip, curving continuously to a narrow concave neck and a sloping shoulder, then an ovoid body attached to a short disk foot, tapering on both exterior and interior, with a flat resting surface and a pointed underside. The vertical strap handle, slightly concave on its outer side, reaches from the lip to the widest part of the body, where it curves into the shoulder. Two horizontal d-shaped, upcurving handles, round in section, also rise up from the join of the shoulder and body. 2010.98.0285.jpg
34.8.12 The lid is three-stepped, with a flat disk-shaped surface on top of which there are two, concentric, conical areas and the handle, which is pear-shaped, with a button-like ending. The body is amphi-conical? But the upper surface is rounder and of a smaller diameter. The stem is slim and high, the foot is three-stepped and its bottom is a larger ring-shaped surface. Underneath, the surface is concave and conical. 2005.88.0067.jpg
34.8.3 Flared cup mouth. Single curved handle. Base is slightly concave. 2003.97.0421.jpg
35.4.2 The handle is small and joined from the shoulder to the neck below the mouth and the body is ellipsoid. 2002.97.0682.jpg
35.4.4 Trefoil lip oinochoe, with a handle of ellipsoid cross-section that is raised higher than the lip. The body is spherical and the short foot is conical. Gill's shape 5c. 2003.31.0091.jpg
37.11.4 Type B, formerly called 'glaux'. One horizontal handle and one vertical, both circular. Handles are attached just below rim which curves inwards. 2003.97.0666.jpg
37.11.7 Flaring mouth and wide neck separated from body by a moulded groove. Single curved handle starting at groove and bending to lip. Small foot, base slightly concave. 2003.98.0059.jpg
37.11.8 The vessel has a rope handle at its back with a rotella (connects to the rim with a bit that looks like an anklebone). The other two handles are inclined upwards and of cylindrical shape. They are attached to the upper part of the body in two spots and they are riddled. The foot is quite tall and conical (widening towards the base). 2003.36.0007.jpg
38.4.4 Ladle with one handle and spout in side. 2003.98.0165.jpg
38.4.5 Hand-made, body is wider towards the base, base is flatened. Neck and handle are missing. Small flat lug (mini handle) on either side of the missing handle. 2003.01.0003.jpg
38.4.7 One vertical and two horizontal handles. Mouth tapers to long, wide neck. Vertical handle from top of shoulder almost to top of neck. 2003.95.0088.jpg
44.1.1 Ring-shaped aryballos. The rim is disk-shaped, the handle is banded and the body is inflated and there is no base. 2003.06.0006.jpg
44.6.1 Donut shaped body; rim turns in gradually; the remains of a ribbon handle protrude from one side of the rim; diagonal footring. 2003.35.0091.jpg
45.10.1 High, curved, thick, black handle which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. At the mouth attachment are two moulded heads; spout has central channel and two ridges at moulded rim. The cylindrical neck becomes bell shaped in its lower part, and a ridge marks its attachment to the shoulder, which is slightly concave. Beyond the handle attachment is a flat rim, offset from the shoulder and, more sharply, from the body beneath it, which is upright but slightly convex. The very short ring foot, with broad resting surface, is as broad as the rim around the shoulder. 2004.99.0028.jpg
45.10.4 Central, circular knob handle, with flat top and inset rim. 2007.01.0017.jpg
45.3.1 Everted rim below which is attached a pinched handle with a string hole; elongated piniform body. 2003.97.0266.jpg
45.6.12 Miniature. Handle bends outwards, like lekane-handle and a protrusion each side. 2003.97.0739.jpg
45.6.16 Flared cup mouth. Strap Handle descending from top of neck to sloping shoulder. Base has a central concave section. Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p49 shape class K, pl. 15 no. 80.249 2003.12.0079.jpg
45.6.17 Flared mouth with flat lip. Handle starts halfway down neck, curves up and then down to join shoulder. Long, narrow body. Broad foot. Central concave section on base. 2003.12.0009.jpg
45.6.18 Flared mouth with flat on the top rim. Single strap handle curves from top of shoulder down to top of body. Small torus flat base, divided from the body with a groove. Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p40, lip type j 2003.13.0004.jpg
45.6.34 Bell-shaped mouth tapering to a short neck that broadens to an ovoid body. High swung strap handle joins from neck to shoulder. Conical foot. 'Pagenstecher lekythos' type. Cf. CVA Michigan 1, pl. 27.11 (smaller but similar shape and surface, said to have been found at Taranto) and Lentini inv. 61597: Lagona 1973, no. 85, pl. 11 (more slender). Both of these examples have smaller handles. For Sicilian vessels of this shape (decorated with bands or undecorated) see examples from Selinunte (Anne Kustermann Graf, Selinunte. Necropoli di Manicalunga. Le tombe della Contrada Gaggera [2002] 181 inv. nos. 113/0 952 and 953, pl. 57 [tomb 113]); Camarina (MonAnt 54 [1990] 25, pl. VIII [tomb 590.2]; 54, pl. XXVI [tomb 799.1-2]; and pl. LXXXIII [tombs 1222.5-6 and 1232.2, which are taken to be (imitative of) Corinthian lekythoi). 2002.97.0017.JPG
45.6.37 Conical mouth with a thick, slightly convex rim, merging into a short, tubular neck, from the top of which emerges a thick strap handle that loops down to the bottom of the shallow sloping shoulder; ovoid body; broad torus ring foot. 2010.98.0159.jpg
45.6.5 Single ribbon handle with projecting side pieces. The upper part of body rises sharply at rim. 2003.35.0089.jpg
45.6.70 Circular shallow body with flat shoulder and a concave discus with small filling hole towards the right edge of the discus. Body shallower at the front end and the widest part of the body has a raised band around it. Short rounded nozzle and circular smoke hole. Vertical handle with a circular hole which runs down towards the base. Base demarcated but not raised and slightly off centre. There are two small shoulder lugs on opposing sides. 2005.01.0007.jpg
45.6.71 Circular body with a flat bad around the widest part. Slightly convex shoulder and a concave discus with a small irregular filling hole roughly in the centre. Short nozzle with a rounded tip and circular smoke hole. Vertical handle extends towards base and has a small hole. Base is demarcated but not raised. 2005.01.0010.jpg
45.9.2 Flat-lipped conical mouth, vertical strap handle rising from the bottom of the neck and reattached at the top of the 'ankle' on the body, which is in the shape of a left foot wearing a sandal. The base is a flat surface, separated from the sole by an incised line. 2011.98.0080.jpg
46.5.1A-B Matching lid with knob. The body has lugs on shoulder close to handle and projections on the tops of handles. 2005.89.0055.jpg
46.9.1 'Little lion' shape. Shallow, flaring mouth; thin neck from the top of which a single strap thin handle curves down to the flat shoulder; slight ridge between neck and shoulder; body tapers down to disk foot; base flat with central concave circle. Cf. Agora 12 part 2, no. 1115, pl. 38 2003.92.0149.jpg
46.9.2 Rim set off by ridge at level of upper attachment of handle. Lower part of body grooved in upper reserved half. Side of foot stepped, resting surface grooved. Handles spurred. 2003.19.0003.jpg
47.10.3A-B Lid: tall, conical, flat-topped knob on a sharply sloping conical lid, with plain rim, vertical profile, flat underside, leading to a short flange (0.3) to sit within lekanis. Lekanis: slightly everted, rounded rim with flat lip, on a deep bowl with straight walls in two parts, separated by a sharp carination near the bottom, attached to a short disk foot, angled on inside and out, with a slightly convex underside. From either side of the rim extends a semicircular horizontal handle, round in section, that rises very slightly, flanked by short pointed spurs or lugs on either side of the handle. 2010.98.0012.jpg
47.2.24 Shallow with one wishbone handle (the second is missing) 2003.92.0158.jpg
47.2.6 Slightly flaring rim, flattened at the top, but sloping inwards; angled wall that curves sharply to a shallow bowl; horizontal, horseshoe-shaped strap handle, attached just below the rim and rising slightly above; broad torus ring foot. 2001.99.0123.jpg
47.2.7 Slightly flaring rim, flattened at the top, on an angled wall that curves sharply to a shallow bowl; horizontal strap handle, nearly triangular, attached just below the rim, rising slightly upwards; groove at the junction of body and broad ring foot, slightly convex at centre of underside. 2008.98.0404.jpg
47.6.4 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in centre. 2008.99.0577.jpg
47.6.5 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in the centre. 2008.98.0301.jpg
48.12.10 Long tall neck from the top of which handle loops up and then down to join edge of broad shoulder, curning slightly upwards. Straight body; sturdy, flat foot; concave base. Cf. Smith 2003, BSA 98, p349, footnote 24, pl. 58 d-f (see also 'comments'). 2003.97.0425.jpg
48.12.4 Broad, flat rim; short neck the length of which runs the handle with a hole for suspension; inverted oviod body; rounded base. 2010.98.0358.jpg
48.12.5 Vertical strap handle curves up from rim and joins shoulder, rising slightly over the rim; trefoil lip; long cylindrical neck; half-sphere body; flat base 2003.92.0265.jpg
48.12.6 Disk-shaped mouth with flat rim; cylindrical neck; flat strap handle reaches from rim down to middle of shoulder; body is a slightly flattened ball, round on the bottom. 2002.97.0134.JPG
48.12.7 Flaring neck; upper part of body slopes sharply out to junction with bottom of single curved vertical circular handle. Widest part of body is towards base making a 'squat' shape. Flat base. 2003.97.0296.jpg
48.12.9 Projecting rounded rim with a lip that is flat on the upper surface; ribbed vertical strap handle extending 1/3 down the length of the vessel; slender neck widening to a cucumber shaped body. Flat concave base, the underside of which is outlined with a groove. 2008.99.0514.jpg
48.5.3 Tall jug with rounded rim, cylindrical neck, piriform body, and high arching loop handle that rises from the rim.
49.1.1 Inturned rim with straight sides; ribbon handle; shoulder slopes down to vertical wall, then sharply recedes to vertical footring and sloping underside of the base. 2003.92.0300.jpg
49.12.1 Everted, nearly flat rim, with round lip, curves sharply to a cylindrical upper body, somewhat concave, separated from the lower body by a ridge above a flange. The lower body is comprised of four horizontal ribs, above a shallow bowl that narrows to a thin, short stem, that curves continuously into a conical foot, finishing with a broad groove above a rounded edge. The underside is hollowed. Two strap handles, which flare on either side, rise up above the rim and then descend to rejoin the body at the flange. A spur projects from the lower part of each handle, approximately in the middle of the upper body. 2008.98.0387.jpg
49.4.1 The mouth is conical, with a large aperture, the handle is banded and the foot is two-stepped and disk-shaped, with a small central concave dot underneath. 2005.88.0081.jpg
49.8.1 Unusual form; neck and body are identical to a shape 8M oinochoe (mug) in Boston, Museum of Fine Arts 22.632 (Padgett 1993, 211 no. 142, ill.), as if a fancier rim, handle, and lower part of the foot have been added to this piece. 2008.98.0423.jpg
49.8.10 Trefoil lip; short neck; Ring in the junction of neck and body; thick rounded handle curves up from top portion of bulbous body to back of neck; outturned conical footring; convex underside. 2003.93.0309.jpg
49.8.11 Ball aryballos. Wide concave rim, thin strap handle projecting from the rim and connecting it to the shoulder. Round body, slightly concave underside of the base. 2003.97.0012.jpg
49.8.12 Flaring mouth, flat rim on the top; single strap handle curves down from top of neck to shoulder; body tapers to thick disk foot; flat base except for concave central circle. Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p48, pl. 16 nos. 18.52 & especially 18.62 (feet missing so cannot be compared) 2008.99.0528.jpg
49.8.2 The two-stepped handle has its upper part in the shape of echinus, while the lower part is a smaller, plastic ring. The body is conical and the rim is incurving. 2003.94.0065.jpg
49.8.4 Flat-bottomed aryballos. Broad, flat rim; tall thin neck; vertical strap handle; rounded body; small footring; slightly convex base. 2008.99.0365.jpg
49.8.5 Broad, flat rim; short strap handle; body shaped rather like a bombylios, with moulded rings; small ring foot; concave base. 2003.97.0247.jpg
49.8.6 Trefoil lipped; thin neck; thick strap handle curves down from back of lip to lower body; half-sphere shaped body; flat base. 2008.99.0401.jpg
49.8.8 Trefoil lip; large handle with high sides making central channel curves up from rim, then down to top of body; bulbous body; small, flat base with central sunken disk 2003.97.0621.jpg
49.8.9 Scale aryballos (pointed/piriform). The vessel has a flat, wide, disk-shaped rim, a banded handle and a slim, cylindrical neck. The body is ovaloid (inverted egg) and the base is ring-shaped.
50.10.4 Cup mouth, a vertical, banded handle and a disk-shaped base. 2013.99.0031.jpg
50.12.1 Fragment of rim of krater with part of root of one handle. 2006.20.0161.jpg
50.12.11 Jar fragment with part of handle 2003.98.0112.jpg
50.12.3 Fragment of a bowl with vertical handle. 2003.98.0221.jpg
50.12.33 Fragment of a small jar, handmade, with broken stump of handle 2006.20.0154.jpg
50.12.34 Fragment of cup with base of handle. 2003.98.0095.jpg
50.4.18 Nearly identical to a lidded mug excavated from the Pantanello Necropolis at Metaponto, published by Maria Elliott, in Carter 1998 2.643, fig. 14.2, 667 M3 (T 128-2): the Pantanello mug, which Elliott describes as an 'odd mug' and probably a local imitation of the late 5 c. Attic double handle mug (667), has a knotted handle which is otherwise similar to ours in contour and thickness. For less close comparanda cf. Morel 1981, type 5345a (citing examples from Capua and environs, e.g. CVA Capua 3, Italia 1312 no. 2: less squat, but similar); these Campanian examples are dated to ca. 300. Convex lip with rounded outturned rim, to which is joined a vertical strap handle, tripartite, with two projections on either side of the rim attachment. The handle loops and reattaches at the top of the bulging, ribbed body (ribbing visible on the interior). Tall angled ring foot, the interior of which has an incised spiral (not visible on exterior). 2010.98.0291.jpg
50.4.20 Outward facing lip on a rim folded into a grape leaf shape, shape continues down neck. Neck joins a plain convex shoulder. Tapering lower body joining slightly taurus foot with slightly concave base. Curved vertical handle attached to the lip and the shoulder 2005.02.0003.jpg
50.4.24 Shallow circular body with convex shoulder and a small concave discus; small filling hole at centre. Nozzle is short and has a flat surface at the tip into which a wick hole has been made, slightly off centre. Small vertical ring handle at the back of the lamp. Base is demarcated but flat. 2005.01.0054.jpg
50.4.5 Type 7a. Cut-away neck, with a vertical strap handle attached to the lowest part, rejoining the body at the bottom of the shoulder; cylindrical neck sharply joining sloping shoulder, which curves into the ovoid upper body, tapering into a cylindrical lower body; raised base; reserved on the interior, underside and resting surface. 2008.99.0569.jpg
50.4.6 Flaring mouth with rounded rim on the top. Circular vertical handle rising over the rim, connecting the rim and the shoulder. 2003.92.0363.jpg
50.4.8 Bell-shaped mouth with convex lip and high out-turned rim; tubular neck joined to ovoid body; short thick stem curving out to a carinated moulded foot, concave on the underside; vertical strap handle curves up from the middle of the neck and rejoins at the base of the shoulder. 2003.97.0814.jpg
50.4.9 Trefoil lipped; rounded handle curves up from the rim to the upper part of the body; short neck curves sharply into shoulder and bulbous body; small footring; flat underside. 2008.10.0031.jpg
50.5.1 Trefoil lipped oinochoe with rounded protrusions either side of neck-handle join. Single curved handle that reaches over into mouth, appears to have had an oblong pattern, and is flanked by moulded protrusions at the top and bottom. Wide neck with a groove at juncture with bulbous body. Ring foot reserved and base raised. 2006.20.0092.jpg
50.5.3 Rounded mouth, thin lip. Thick strap handle curves up from bottom of neck before descending to shoulder. Ring at the junction between neck and shoulder. Curivng shoulder towards the neck. Body inverted pear shape. Thin foot. Base convex underneath. 2007.01.0012.jpg
51.1.2 The vertical handle is of ellipsoid cross-section with a banded back. The horizontal handles are riddled, circular and slightly curving upwards. The foot is conical, with a ring-shaped termination and the base has a concave, conical surface with an inflated semi-spherical central part. 2010.98.0180.jpg
51.1.3 Thick, wide rim with flat top, broad neck. Two rounded handles curve upwards from the top of the body to the neck, from the middle of which they continue in a broad, vertical strap handle to the rim. The body tapers into the narrower bottom and thick, wide base. 2005.89.0074.jpg
51.4.1 Fragment of the rim and neck, around the surface of the handle. 2005.90.0010.jpg
51.4.11 Moulded rim, grooved, with flat upper surface and sharp lip, on a short cylindrical neck, with attaches, at a ridge, to an ovoid body, attached below, also at a ridge, to a slightly flaring stand, with splaying foot, slightly ridged on upper edge, bevelled on exterior, hollow on the interior. From the shoulder, on either side, rises an m-shaped handle (half of one chipped off) with short projections in the middle. Three holes (to enable air flow) are drilled into the upper part of the stand, just below the join. 2002.97.0369.jpg
51.4.5 Sack-like body with narrow mouth (missing, as is handle), broadening with slightly convex sides, and rounding gently to a flat base. 2004.06.0004.jpg
51.4.8 The rim is slightly flared and the neck is short; a strap vertical handle curves down from the rim to the shoulder; two smaller, round, horizontal handles protrude from the upper side of the rounded and pear shaped body; the foot is small and flaring; the base is convex
51.4.9 The rim is conical, strap small handle connecting the enck with the shoulder, is banded with an inflated back, shoulder curving slightly upwards, the body is ovaloid, tapering down to a torus foot, conical underneath. Cf. Agora 12 part 2, no. 1117, pl. 38 Cf. "Sixth and Fifth Century Pottery", P.N.Ure (ed.), p43 shape class E, pl. 14 nos. 130.108 & 127.59 2013.99.0165.jpg
51.7.1 Trefoil lipped; high handle with ridge down middle curves up from the shoulder considerably higher than the rim; neck progresses smoothly to body, as body does to foot; foot is stepped with the side reserved; underneath is ruddled and concave with convex centre. 2005.88.0046.jpg
51.7.15 A small mouth, with flaring lip, on a short concave stem, is joined smoothly to a ring aryballos, rectangular in section, approximating a sharp-edged donut, with beveled edges on the inside. A short strap handle rises slightly from the rim and curves smoothly to adhere to the exterior surface of the aryballos. Ure 57: 'Rectangular in section, as is normal in Boeotia'; cf. P.N. Ure, Hesperia 15 (1946) 45-50. Small mouth and handle. Angular shape with side and edge flat 2004.06.0013.jpg
51.7.3 Flaring lip with rounded rim, sharply joined to ovoid body; single round, curved vertical handle rises up from alongside the lip and rejoins at the shoulder; lower part of body sharply joins to a short, flaring foot, concave on the underside, with a pointed underside. 2008.98.0371.jpg
51.7.4 Handle 2002.97.0560.jpg
51.7.5 Bell mouth, flaring at the rim, with a convex upper surface, offset from a narrow neck, broadening and curving sharply into the ovoid body; strap handle rises from the top of the neck and joins the lower part of the shoulder; molded ring base, divded into two concave parts, divied by a ridge at the middle; convex underside. 2008.99.0557.jpg
51.7.8 Cup mouth with slightly concave upper surface, tubular neck offset from mouth and shoulder; ridged vertical strap handle loops up from top of neck and descends directly to the shoulder; squat body; broad torus ring foot. 2003.93.0255.jpg
52.3.2 Flat rim; tall mouth sloping in towards thin neck; handle curves up from top of neck, then down to body; groove separates rounded body from flat foot
52.3.4 Slightly convex, slanted, overhanging lip, rounded at the edge, on a slightly concave tapering rim, slightly offset from the lower bowl that curves sharply to a tall conical foot, rounded at the edge, with flat resting surface and a slightly convex underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs (handle and lugs broken off on one side). 2004.07.0009.jpg
53.8.3 Slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs. 2010.98.0024.jpg
54.2.2 Everted lip; thin, tapering neck; strap handle curves down from rim to spherical, bulbous body; slightly raised flat foot. 2008.98.0329.jpg
54.8.1 or 'Mug'? Slender body, vertical straple handle extending from the rim to the bottom of the body. Flat base. 2008.98.0351.jpg
55.1.1 Rounded outturned rim, narrowing to neck and broadening to baggy body, in a continuous curve down to the angled torus ring foot. Vertical ribbon handle, slightly grooved, loops from just below rim to the upper part of the body. 2003.92.0184.jpg
56.8.2 Tall inslanting rim with plain round lip, sharply turning to a short shoulder that broadens to an ovoid body, which tapers to a tall moulded foot, comprised of a beveled top, two concave elements, a carination, below which a scotia above a torus. The resting surface is ridged and the underside consists of a pointed convex centre, within a tapering concave part. Two u-shaped handles, round in section, rise from the bottom of the shoulder to high above the rim. On either side of each handle is a pointed lug. 2002.97.0579.jpg
56.8.4 Shape 1; trefoil-lip joining at the back to a high curving vertical strap handle, which joins at the shoulder; ring base. 2003.59.0004.jpg
58.2.4 Wide rim with bevelled lip. Long wide neck leading to a short and rounded body, base protrudes from body but has been damaged (during firing process ?). The handle attaches to the top of the body and then again at the join of the rim and the neck. There is a fork shaped spur which follows the curve of the handle and rim and then continues above the main body of the jug. 2003.92.0082.jpg
58.2.5 Round body somewhat pointed at the base. Cut-away neck spout (derived from Anatolian precursors). Handle attaches to the middle of the spout and then rejoins the jug on the shoulder. 2003.92.0321.jpg
58.2.6 One-handled bowl. Rim is slightly concave. Handle is in wishbone shape. A deep well is in the centre, of a greatly smaller diameter than the rest of the bowl. For general shape cf. Sydney, Nicholson Museum 55.18 (Base-ring wheel-made Ware, Late Cypriot III). 2003.92.0112.jpg
59.6.1 Everted, concave rim, with round lip, offset by a carination from a shallow bowl, tapering sharply to a short stem that broadens to a moulded foot, concave in profile, with a nearly flat resting surface, grooved just within the resting surface, hollowed and conical within; a slightly incurving d-shaped handle rises up, on either side, from the centre of the bowl to the height of the kylix. 2010.98.0333.jpg
59.6.3 Single but ornate handle that has pointed oval at bottom, two moulded lines towards top and a piece that curves up separate to the main handle in a 'cobra-like' strike pose. The main piece of the handle extends along rim of vessel in a leaf-like shape with notches in the edges. Mouth is wide and has small rim. Outside body is marked with 4 pairs of incised bands around its sides. Small curve at side of foot. Base is flat but has 6 incised concentric circles and a central sunken dot.
60.1.2 Pagenstecher lekythos. (Restored rim); thin neck from the middle of which handle protrudes horizontally before sloping down to rounded body; broad foot; concave underside 2003.97.0377.jpg
60.1.5 Bell-shaped mouth with high outturned rim and broad, slightly convex lip;long neck widens to shoulder with smooth contour to ovoid body; vertical strap handle rising from top of neck and rejoining at bottom of shoulder; short ring foot. 2008.99.0786.jpg
60.8.2 Rim of the mouth is a little bit wonky, with a ridge on the flat top. Cylindrical short neck. Almost flat shoulder. A single rounded handle curves down to the shoulder from the rim, and two horizontal, horseshoe shaped handles emerge from the top of the body. Body tapers down to small torus foot 2002.97.0709.jpg
60.8.3A-B Lid: three tiered round knob with central, nearly conical well; short concave stem curving above and below into knob and lid; nearly flat lid tapering gently to a short vertical rim, rounded at both edges. The underside is slightly hollowed under the knob. Lekanis: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls, slightly carinated and narrowing, with convex lower portion, to a very short stem, on a rounded disk foot, with a flat resting surface, curved on the underside, with a rounded point at the centre. A wishbone handle rises from the top of the wall, on either side; a lug protrudes from either side of each handle. Ure 1960, 216 notes that what remains of the one handle indicates that it was pointed (wish-bone shaped) at the centre as well as rounded in section. 2002.97.0575.jpg
61.6.1.8 Ovaloid jug with a small mouth, a long neck flaring to a large body, and tapering again to a small, plain base; fat, rounded handle. 2003.92.0127.jpg
61.6.3 Everted lip with rounded rim, curving out to a short shoulder, then tapering to a conical, deep bowl, with short stem that broadens to a flat, disk foot, with tapering, slightly rounded exterior, gougedresting surface, slightly concave interior, and slightly convex underside. From either side, just below the rim, a u-shaped handle, round in section, rises up to just above the top of the rim. 2010.98.0337.jpg
61.6.5 Lid: Short button knob, with flat band, beveled interior edge, and slightly convex top, curving smoothly to a nearly flat underside that smoothly joins a short, slightly concave stem, that again smoothly joins a flat, tapering smoothly to a short vertical rim, rounded at both edges. The underside is hollowed under the knob. One-handler: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls curving into a convex lower portion then a very short stem, on a rounded disk foot, with a flat resting surface, beveled on the interior, and slightly convex on the underside. A single, recurved horizontal handle, round in section, rises above the rim. 2002.97.0677.jpg
62.5.1 FS (='Furumark shape') 220. Shallow cup with flaring rounded rim, one vertical round handle, slightly concave sides that taper sharply below the handle to a raised base that is slightly concave on the underside. 2003.94.0036.jpg
64.7.1 Stemless (of a late type). Thin inturned rim; shallow bowl; one remaining rounded handle curves up slightly higher than the rim from just below the rim; round footring; flat underside with slight moulded circle on base. 2003.57.0002.jpg
65.6.1 The mouth is conical, the handle is of ellipsoid cross-section and the foot is disk-shaped. Cf. 'The Red and the Black: Studies in Greek pottery' by B. A. Sparks, 1996, p20 fig I:12 (see also 'Comments' field). 2003.95.0173.jpg
69.7.1 Foot-shaped aryballos; Dohan Morrow's Group II, 'network sandals' (Dohan Morrow 1985, 6-9) or Ducat's type B foot-shaped vases (Ducat 1966, 182-84). Foot-shaped aryballos with a broad rim, short vertical strap handle, squared, offset neck; the body of the vase in the shape of a left foot, including ankle, with relief decoration that gives the effect of a sandal enclosing it, and a flat, reserved base. 2005.88.0054.jpg
71.12.1 Ovaloid shape. Slightly deep rounded mouth. Strap handle connecting the neck to the shoulder. 2002.97.0702.jpg
71.12.5 Long, thin strigil steeply curved. The handle is thicker at the front and thinner at the back where it bends over to form an oblong. The thinner piece is not attached to the body but curves back on itself and end is a flat circle. 2004.95.0149.jpg
71.12.6 Wide strigil curved in a tight arc. Handle is square and thinner on the back than the front as it bends over to make an oblong shape. The handle adjoins the strigil in a long triangular point with an incised line acting as a border. 2011.98.0027.jpg
76.6.1 Trefoil lipped. Oval shaped body with single handle from mouth to back, with a curled over section at end. Flat base. Small round neck. 2008.99.0388.jpg
78.12.1 Deep circular body, almost flat shoulder, leading to a deep concave discus with two small holes, the frontal one is slightly off centre. Very small rounded nozzle with a large circular wick hole. Vertical handle opposite the nozzle, flat base with no delineation. 2008.99.0677.jpg
78.12.10 Circular body, flat moulded shoulder, small concave discus with a small filling in the front right hand side of the discus. Short flat nozzle, rounded tip with a slightly irregular wick hole that cuts into the shoulder area. Vertical handle which reaches down towards the base and attaches around the shoulder, circular piercing through handle. Circular unmarked base, slightly concave. 2005.01.0114.jpg
78.12.11 Circular body, flat moulded shoulder, small concave discus with a small off center filling hole. Short flat nozzle, rounded tip with a slightly irregular wick hole that cuts into the shoulder area. Vertical handle which reaches down towards the base and attaches around the shoulder. Circular delineated base, slightly concave. 2008.09.0020.jpg
78.12.19 Shallow ovoid body, convex shoulder with a small depressed discus; three small holes in the discus. Nozzle is joined into the body shape and has a rounded tip with a medium oval wick hole. Small vertical handle opposite the nozzle. Base is unmarked but slightly concave. 2005.01.0097.jpg
78.12.3 Circular body, small rounded nozzle with an oval wick hole, Small filing hole on the central axis but not in the centre of the discus. Small single volutes, concave moulded discus. Vertical handle with hole through. No foot, slightly concave base. 2008.99.0724.jpg
78.12.8 Circular body, small convex shoulder with a slightly concave discus, two small holes on the discus, one on the central axis, the other just slightly off to the left. The nozzle is small and flat with a rounded tip and a circular wick hole, just off centre. Vertical handle extending towards the base at the back with a small hole though the centre. Demarcated base is flat except for a small depression. 2008.99.0064.jpg
78.12.9 Large, deep, circular body, small convex shoulder, concave discus with a small filling hole at the center. Medium flat nozzle (broken) concave sides with a small air hole at the base of the nozzle, the start of a rounded tip with a circular wick hole. Space for handle. Circular flat delineated base. 2005.01.0115.jpg
79.1.10 Circular shallow body, concave discus with a small filling hole in the centre. Long flat nozzle with concave sided which meet the tip of the nozzle at an acute angle, the tip is rounded, large circular wick hole. Base is concave with a moulded ring. At the back are the remains of a handle. 2005.01.0034.jpg
79.1.11 Spreading circular body with long flat nozzle and large oval wick hole and rounded tip. Slight anomaly on the underside of the nozzle. Handle is missing. Flat base with no foot, wheel marks. 2005.01.0319.jpg
79.1.13 Large open lamp, deep circular body with a rounded open nozzle. Vertical ring handle at the back, small moulded ring foot. 2005.01.0038.jpg
79.1.15 Fragment of a lamp handle, 2005.01.0091.jpg
79.1.16 Mainly circular body, nozzle is moulded with body disturbing the circular edge back half of body is deeper than the front. Shoulders are convex, discus is concave with a small circular filling hole in the centre. Long deep nozzle, sides follow smoothly on from the body, elongating the circular shape, slightly concave top marked with a ridge on either side, rounded tip and slightly irregular circular wick hole. Remains of small vertical handle attached to the shoulder. Small circular base, slightly concave not lineated. 2005.01.0041.jpg
79.1.17 'Bird-head' lamp, shallow body with one hole nearly at the centre of the discus. nozzle is flat with a splayed tip and concave sides, the smoke hole is circular and almost in the centre of the nozzle. the handle is transverse and has a hole in the centre. The holes all appear to be of the smae size and are all just of centre to the left. 2005.01.0321.jpg
79.1.5 Circular body with convex shoulder and a concave discus with small filling hole. Small raised protruding foot with flat base. Large vertical handle with one incised line along the length of it and a second band laying across the handle at the highest point, also with an incision along it. Long spout with irregular splayed tip, large oval wick hole. joining lines of the handle and the nozzle are apparent. 2005.01.0336.jpg
79.1.6 Circular body with slightly convex shoulder and a slightly concave discus, two holes of differing size are in the discus. The nozzle is small and rounded with an oval wick hole just off center. Vertical handle which reaches to the base which is demarcated with two concentric circles. 2005.01.0083.jpg
80.7.1 Large lekanis with a slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs. 2010.98.0222.jpg
81.9.1 Rounded, everted rim, long neck, piriform body, ring foot. Thick strap handle curves up from the middle of the thick neck and down to the shoulder. 2003.94.0042.jpg
85.3.2 Wide, concave rim; short strap handle from bottom of lip to shoulder; thin short neck curves uninterrupted into bulbous body; slightly concave underside. 2003.97.0051.jpg
91.11.5 handle fragment 2005.02.0232.jpg
E.23.16 Fish shaped, handle is tail, mouth is detailed, possibly a detailed eye, and a whole at the top edge for threading, but this could also be a whale's breathing hole(?). Possibly used for rubing malachite for eye make up.
E.23.26 Everted lip attached to long straight neck, shallow but wide upper body. Lower body gently tapers to an everted foot with a concave base. Handle attaches to just below the top of the neck and rejoins the body at the widest point of the body. 2007.01.0059.jpg
E.23.30 Squat, gourd-like in shape with handle. Neck is long, the handle attaches to the top of the shoulder, follows the handle upwards for a centimetre and the bends back to reattach on the upper body. The body is spherical in shape, tapering to a small disc base.
E.62.19 Hammer shaped handle with a slit where the mirror sat in the top. The top parts are curved over. The handle is rounded and wider at the end.
E.62.40 Three pieces. Lid is circular and flat with a central knob handle, also circular. Second piece is the ring which sits between lid and base and is circular with a central hole cut out and a rim on the underside so it sits in the base. Base is wide at shoulder and tapers to the bottom with smooth walls. At top is a slighlty raised rim to receive ring. Inside is a hollowed out cylinder, not to the contours of the outer wall. 2002.98.0008.jpg
E.62.46 Flat and thin blade with a nail through to both sides, perhaps for attaching a wooden handle. The blade is pointed at one end then widens in a triangle then thins again but not to a point.
E.62.56 Poppy flask, with a fat body, long bottle neck with spreading lip, large handle. Two moulded rings round neck at junction with handle. Foot conical. Cf. Sydney, Nicholson 52.412, from Abydos (Base-ring I Ware) 2003.92.0135.jpg
E.63.18 Portion of a slight oval, cylindrical handle of a sistrum/mirror. 2007.01.0115.jpg
E.65.10 Mirror is very flat; not perfectly round but still circular with a small rectangular section where the mirror would sit into the wooden handle. 2007.01.0179.jpg
E.65.11 Not perfectly round but still circular. Widest from side to side. Has a rectangular extension at base so that the object would have sat in the handle. Flat and thin with slightly sloped edges to avoid making them sharp. 2008.08.0017.jpg
E.65.12 Flat and thin. Not perfectly round but still circular. Small rectangular extension to allow mirror to sit in handle.
L.2011.1.1 Quite cylindrical handle, extending from the rim to the shoulder, slightly rising over the rim. Ridge between rim and neck. Cylindrical neck; torus rim (convex). 2011.97.0034.jpg
L.2011.1.26 Fragmented neck with remnants of a handle. Bulbous neck, wider near the outturned rim. 2011.97.0177.jpg
L.2011.1.36 Almost complete, with handle and nozzle, only one shoulder missing. 2011.97.0307.jpg
L.2011.1.4 Lamp fragment, with a shoulder and one handle. Quite circular shape. The handle is narrower on the top, and it has a triangular section. 2011.97.0350.jpg
L.2011.1.48 Deneuve type VIIA or B. Circular shape, with a small handle. 2011.97.0370.jpg
L.2011.1.51 Fragment of rim and one handle, evidence of the connection of the second handle. Vertical short handle with the right side more protruding, extended from the lower part of the rim to the shoulder. Short cylindrical neck, flaring in a quite horizontal shoulder. 2011.97.0332.jpg
L.2012.9.1 Complete with nozzle, handle and two original holes for use 2013.99.0097.jpg
L.2016.3.10 Miniature dimension. Round, outwards bulged ceramic disc, with very slightly everted, rounded rim and a moulded face at centre of the exterior. A small curved handle, running in a straight line, is attached to the rim and ends at the back side of the left forehead area and the right chin area.
REDMG:1926.99.52 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to an ovaloid body with rounded base; small round vertical handle is tucked in under the overhanging lip. 2004.99.0909.jpg
REDMG:1926.99.54 Chimney mouth (missing), offset slightly from a tall cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap handle arches up from just below the mouth and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, with a profile that is slightly convex; the slightly concave underside has a conical indentation at centre. 2003.93.0391.jpg
REDMG:1926.99.60 Cup mouth, cylindrical neck, to which inside of handle is attached and rises, rejoining at the shoulder; body with straight sides descending from carination at bottom of shoulder; lower body curves in to join molded pedestal foot, with slightly sloping upper surface, scotia above torus on vertical surface, and flat underside. 2004.99.0943.jpg
REDMG:1935.87.1 Trefoil mouth at the back of which is attached an angular strap handle, that rises slightly and then descends sharply to join the lower shoulder; long neck that broadens gradually to a piriform body; short ring foot with rounded profile, flat resting surface, diagonal inside wall, and slightly convex underside. 2005.99.0060.jpg
REDMG:1935.87.15 Plain rim with flat lip, just below which is attached a horseshoe shaped horizontal handle, slightly canted and rising to just above the rim;.flattened hemispherical body attached to a ring foot, rounded on the outer surface, with a flat resting surface, and curved interior wall, offset from pointed underside. 2003.93.0012.jpg
REDMG:1935.87.18A Trefoil-lipped oinochoe with lid tricorn lid (RM.87.35.18B). Wide-bodied, with a tall curved handle, trefoil mouth, and tricorn lid. Body contracting to foot-ring. Cf. Payne NC fig. 10 A-H, esp G. 2003.93.0247.jpg
REDMG:1935.87.20 Trefoil lip oinochoe with lid; shallow sloping shoulder and wide body with wide base; curved handle.
REDMG:1935.87.21 Broad projecting rim with flat lip, narrow cylindrical neck, sloping shoulders curving into an ovoid body, narrowing to a flat base; flat strap handle extends from the rim to the bottom of the shoulder.
REDMG:1935.87.26 Cucumber shape; conical mouth; small handle. 2002.97.0025.JPG
REDMG:1935.87.6 Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards, to which spurs are attached on either side. The lower body is offset from the handle zone, rounded in the lower part where it sharply joins a moulded foot, with groove above a spreading upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface, and a pointed, slightly offset underside.
REDMG:1942.5.6.1 Broad projecting rim with flat upper surface, overhanging lip, and concave underside curving into a short narrow neck that broadens to a globular body with rounded base; flat strap handle falls directly from the rim to the middle of the shoulder. 2003.97.0031.jpg
REDMG:1942.5.6.2 Small trefoil oinochoe, group iii. Pinched trefoil mouth from which rises at the back a high swung strap handle that rejoins the body above the middle; small indentation on lower part of handle; short, wide neck that curves continuously into the baggy body; short, plain ring foot, slightly concave on underside, with central nipple.
REDMG:1950.25.1 Type 8B oinochoe. Wide mouth with rounded, slightly overhanging rim flaring out from a broad neck, attached sharply to the top of the barrel-shaped body, with a moulded ring foot, with a vertical upper part and a grooved, slightly broadening lower part; narrow, flat resting surface; slightly concave underside. Two-piece handle, knotted at the top, splays at the attachment to the rim. 2003.93.0334.jpg
REDMG:1951.130.1 Oinochoe with trefoil lip. Broad neck, widening into grooved trefoil lip, from the back of which extends a vertical tripartite strap handle that reattaches at the middle of the shoulder; broad ridge at the bottom of the neck to which is attached the ovoid body, tapering to a broad ring base, convex on the exterior, with a flat resting surface. 2004.99.0353.jpg
REDMG:1951.132.1 Guttus type askos: swelling rounded body with bearing at the top a large relief medallion (frontal female mask with puffed cheeks and a lock of hair knotted over the forehead) offset and raised from the body; at a distance of ca. 0.5 cm are two incised lines beyond which the body is covered with fine vertical fluting down to its midpoint. A long diagonal spout with slightly concave sides rises obliquely from the shoulder below the medallion, and terminates in a three-stepped flanged mouth. A loop handle (semicircular in cross section) rises from the shoulder at a right angle to the spout. A tall thick foot, offset from the body, with a ridge at the halfway point broadens toward a ring base, slightly rounded on the exterior, with a concave underside offset from a concave element within the narrow resting surface. The foot is particularly tall, and is ridged in the middle: otherwise in shape this askos corresponds to Morel's type 8141h 1 (Morel 1981, pl. 209). 2004.99.0752.jpg
REDMG:1951.140.1 Broad rim, slightly convex on upper surface, ridged at the outside edge, with overhanging lip; neck, concave in profile, broadens to a nearly flat shoulder that curves sharply to an ovoid body, which narrows sharply at the bottom, where it is joined to a moulded pedestal foot with a splayed base and concave underside; upper part of foot has tapering straight sides; the profile of the base is decorated with two ridges. Two incurving horizontal handles, round in sectiona, are attached to the upper third of the body; a vertical handle, also round in section, emerges from the top of the neck and curves down to the lower part of the shoulder. 2004.99.0810.jpg
REDMG:1951.142.1 Trefoil mouth attached at the back to a small strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy, bulbous body; broad, angled ring foot, rounded at the bottom, thin resting surface, slightly convex on underside. 2004.99.0702.jpg
REDMG:1951.143.1 Trefoil mouth at the back of which is attached a nearly L-shaped strap handle, that begins above the height of the mouth and descends to join the lower shoulder; short neck broadening to a piriform body, ribbed below the shoulder under shortly above the foot; short ring foot with flat resting surface, diagonal inside wall, and slightly convex underside. 2001.99.0005.jpg
REDMG:1951.147.1 Tall cylindrical neck offset from a squat body, with a curved shoulder, flange below the shoulder, concave side walls (offset at top and bottom), and a broader ring base, curved on the upper surface, with a broad resting surface, offset, slightly concave underside. From the front of the neck extends diagonally a tubular spout, squared at the end. From the back of the spout rises a high curving strap handle, rounded on the outside, which arches in a rectangular form, and descends sharply towards the lower part of the shoulder; which bends back on itself to attach to mouth and at the back to the lower part of the shoulder. Two moulded male heads, bearded, are found on either side of the upper handle attachment. 2005.99.0048.jpg
REDMG:1951.151.1 According to Trendall and Cambitoglou, RFVA 1.278.149, this is a special lekythos shape. Cup mouth, slightly flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the bulbous squat body; short ring base, rounded in profile, with narrow, flat resting surface and recessed underside; strap handle rises from the upper part of the shoulder, along the side of the neck and curves to rejoins at the lowest part of the shoulder.
REDMG:1951.153.1 Askos in the shape of a duck, with an everted rounded rim on a short cylindrical neck, from the back of which rises a strap handle that curves down to join the vase just above the tail. 2005.90.0025.jpg
REDMG:1951.154 Flaring flat, broad lip with convex upper surface and and concave lower surface, curving into a cylindrical neck; vertical ribbon handle emerges from the rim and rejoins the bottom of the neck at a bulge, below which is a conical body, with a rounded base, and a slight conical indentation at the bottom. 2005.99.0098.jpg
REDMG:1951.155 Flaring broad lip with flat upper surface, tapering rim, and concave lower surface; pinched neck to which is attached a small lug handle, with a suspension hole; neck broadens to a baggy, ovoid body, with a rounded base. 2005.99.0096.jpg
REDMG:1951.156.1 Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem. 2004.07.0008.jpg
REDMG:1951.157.1 Cup mouth, flaring at the top, with a broad rim, convex on the upper surface; the mouth is offset from a short cylindrical neck that broadens toward the squat, high shouldered body, from which it is offset; tall but narrow ring base with rounded resting surface and slightly convex underside; strap handle rises from the side of the neck and rejoins at the lowest part of the shoulder.
REDMG:1951.158.1 Trefoil mouth attached at the back to a small, ridged strap handle that reattaches at the bottom of the shoulder; short cylindrical neck curves into a baggy body; broad ring foot, squared in section, with a thin resting surface, slightly convex on underside. 2004.99.0782.jpg
REDMG:1951.1707 Everted rounded rim, from the back of which extends a round vertical handle that reaches to the middle of the biconical body with a flat, rough base. 2004.99.0399.jpg
REDMG:1951.1708 Everted rounded rim, from the back of which rises a round vertical handle that joins the body at the middle of the slightly baggy body with a flat, rough base.
REDMG:1953.25.1 Type B, formerly known as 'glaux' variety. Slightly incurved rim, below which is attached a one side a round horseshoe-shaped handle, canted slightly up to the level of the rim, and on the other side a ridged strap handle that rejoins just above the middle of the body; convex side walls; torus ring foot with slightly convex underside. 2004.99.0612.jpg
REDMG:1953.25.13 Globular oinochoe of Archaic shape. Trefoil lip attached at the back to a broad strap handle, high swung and descending vertically to the middle of the shoulder; slight step at top of shoulder, below sharp join with cylindrical neck; squat body; broad, angled ring foot, with flat resting surface; slightly convex underside.
REDMG:1953.25.14 Trefoil mouth attached at the back to a high swung strap handle that reattaches near the bottom of the shoulder; short cylindrical neck with a ridge marking the join with the high-shouldered, squat, rounded body; broad, angled ring foot, slightly concave on underside. For large trefoil oinochoai see Corinth 13, 130-32 fig. 14
REDMG:1953.25.15 Trefoil lip attached at the the back to a broad, high curved strap handle that curves in slightly to the middle of the shoulder; short cylindrical neck joining stepped shoulder in a continuous curve; globular body curves into a short ring foot with diagonal resting surface and slightly concave underside.
REDMG:1953.25.16 Trefoil mouth at the back of which is attached a hook-shaped round handle that begins above the height of the mouth and turns back to join the shoulder, with a slight spur; short neck curving into a baggy body in a continuous curve; short ring foot with narrow, rounded resting surface, diagonal inside wall, and pointed underside. Handle attachment is indicative of the Dotted Spray Group 2005.99.0090.jpg
REDMG:1953.25.20 Globular body of Archaic shape, with trefoil lip, high swung, broad ribbon handle, moulded ring just below neck, and shallow flaring ring foot.
REDMG:1953.25.22 Chimney mouth with everted lip, slightly concave on the upper surface, and ridged on the lower surface, offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, slightly flaring at the shoulder, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, comprised of a scotia above a torus; the flat base has a conical indentation at centre. 2005.99.0074.jpg
REDMG:1953.25.23 Chimney mouth (missing), offset from a tall cylindrical neck, which broadens to a flat shoulder. Small strap handle arches up from alongside the neck and rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering towards the base, and then sharply narrowing to a short stem, attached to a moulded pedestal foot, with a profile that is concave above convex; the flat base has a conical indentation at centre. 2005.99.0076.jpg
REDMG:1953.25.25 Tall cylindrical neck, which broadens to a slightly diagonal shoulder. Small strap handle rejoins at the bottom of the shoulder; below a carination at shoulder is a cylindrical body, tapering gently towards the base, which is attached to a moulded pedestal foot, tapering down, with a profile that is slightly convex; the underside has a conical indentation at centre. 2003.93.0392.jpg
REDMG:1953.25.26 Cup mouth with flat lip, slightly offset from narrow neck, which broadens to a nearly flat shoulder; thin strap handle rises from under the cup mouth and rejoins at the lower part of the shoulder; below carination is a conical body, with concave side walls, tapering down, and straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside. 2003.93.0394.jpg
REDMG:1953.25.27 Narrow cylindrical neck, broadens to a nearly flat shoulder; thin strap handle rises from the top of the neck and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then straightening out towards the small disk foot, flaring on its upper edge, rounded on its vertical edge, and with a broad, flat resting surface; nipple at the centre of the underside. 2005.99.0085.jpg
REDMG:1953.25.28 Narrow neck (mostly missing), broadens to a nearly flat shoulder; thin strap handle broadens and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then curving in to a short stem, attached to a small pedestal foot with a raised base; small nipple at the centre of the underside. 2003.93.0396.jpg
REDMG:1953.25.29 Narrow neck (mostly missing) broadens to a nearly flat shoulder; thin strap handle broadens and rejoins at the lower part of the shoulder; below carination is a conical body, tapering and then curving sharply into a short stem, attached to a small pedestal foot, tapering down, with a slightly raised base; small nipple at the centre of the underside. 2003.93.0397.jpg
REDMG:1953.25.30 White-ground lekythos, group iii. Conical mouth with flat rim, slightly offset from cylindrical neck which curves sharply into nearly diagonal shoulder; vertical strap handle (missing) reached from top of neck to bottom of the shoulder, below which a carination marks the join with the straight body that tapers down to a high, molded, pedestal foot, grooved at the top of the slightly convex vertical surface, concave on the underside, with a nipple at the centre.
REDMG:1953.25.32 Kalathos-shaped body, with a flaring rounded rim, to the top of which are attached the looped ends of a pair of strap handles, concave on their exterior surfaces; the tubular ends of the loops rejoin the middle of each handle, and below the bottom of each handle, attached at the bottom of the cup, is a spur. Below a carination, the bottom of the cup narrows to a nearly cylindrical stem, ridged at the center, below which it widens, and smoothly curves into the top of a moulded foot, with three ridges, of increasing diameter, on the exterior surface. Within the narrow resting surface is a concave underside, with a conical hollow at centre. 2005.89.0006.jpg
REDMG:1953.25.35 Chimney mouth, bell-shaped, flaring at the top, with a broad rim, convex on the upper surface, and sloping in; the mouth is offset from a short neck that broadens toward the barrel-shaped body, from which it is also offset; thick disk foot, rounded in profile, with a thin resting surface, concave on the underside, pointed at centre; strap handle (missing) rose from the side of the neck and rejoined at the lowest part of the shoulder. 2001.99.0036.jpg
REDMG:1953.25.36 Flaring rim, with a flat lip on the upper surface, at the top of a tall neck with concave sides, alongside which is attached and rises a small strap handle (lopsided) that rejoins at the middle of the shoulder; sharply joins barrel-shaped body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside. 2003.93.0321.jpg
REDMG:1953.25.39 Flanged rim and tapering body, to which are attached broad horizontal strap handles (rounded but almost oblong in shape), slightly canted upwards, with spurs on either side. The lower body is offset from the handle zone, rounded in the lower part where it attached to thick stem broadening to a moulded foot, with spreading upper part, slightly concave, and a broader, rounded lower part, broadening towards the base, with a conical depression on the interior, and a narrow resting surface 2005.99.0148.jpg
REDMG:1953.25.43 Broad projecting rim with slightly convex lip; short narrow neck curving into a globular body with rounded base; flat strap handle extends from the rim to the middle of the shoulder.
REDMG:1953.25.48 Deep round mouth with concave lip, slightly overhanging, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled ring foot. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
REDMG:1953.25.49 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the middle of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base.
REDMG:1953.25.50 Deep round mouth with concave lip, slightly overhanging attached to a high swung vertical ribbed handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge, a globular body, slightly flattened, and a low, sharply angled foot, with a flat base. Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134. 2004.95.0164.jpg
REDMG:1953.25.51 Upturned rim, slightly offset from the neck, which is cylindrical and nearly straight, joining an ovoid body, slightly baggy, supported by a broad ring base. Vertical strap handle, grooved, extends horizontally from the rim and curves back into the body, which it joins in the upper part.
REDMG:1953.25.52 Wide mouth with slightly concave lip, and a ridge from which descends a moulded, overhanging rim, which broadens. The rim is concave on the underside and curves into a broad neck that broadens to a piriform body. The vertical strap handle emerges from the rim and descends sharply to the bottom of the shoulder. The raised base is flat on the underside. 2004.99.0216.jpg
REDMG:1953.25.53 Incurving rim with concave lip, narrowing to a short neck at the top of which is attached a small vertical strap handle that extends the the shoulder; wall curves continuously from neck, widening to an ovoid body atop a disk foot; underside concave with a slight circular protruberance at centre. Tapering 'cucumber', survival of the Late Corinthian Archaic type (see Corinth 13, 140-41, fig. 15), but with a disk foot. E.g. Corinth T1317: Corinth 13, 222 no. 277-4, pl. 37. Cf. also Rhitsona 50.273. 2002.97.0005.JPG
REDMG:1953.25.54 Wide-mouthed mug. Rounded outturned rim, narrowing at the neck and broadening to a baggy body, in a continuous curve down to the thick torus ring foot, with a thin resting surface, diagonal element, and offset underside; a vertical loop ribbon handle is tucked in just below the rim where it adjoins the upper half of the body.
REDMG:1953.25.55 Wide flaring mouth with rounded rim; short neck narrowing to sharp join to an ovoid body that tapers sharply at the bottom to a flat base; grooved just above the base. Two-piece strap handle splays at the attachment to the rim and rejoins the shoulder (for handle cf. RM.1950.25, which is, however, knotted). 2003.93.0301.jpg
REDMG:1953.25.59 Deep round mouth with rounded rim, concave, slightly overhanging lip, attached to a high swung vertical strap handle, which reattaches at the shoulder. Below the mouth is a short neck with a ridge at the attachment to the globular body, slightly flattened, and a low, sharply angled foot with a flat base.Corinth round-mouthed oinochoe, type A, group i: see Corinth 13, 131 fig. 14, 134.
REDMG:1953.25.60 Round mouth with slightly flaring lip from which extends a short vertical ribbed handle that reattaches at the middle of the shoulder; short, thin neck, which curves out sharply to a nearly flat shoulder that broadens to a squat, rounded body; wide vertical ribbing on widest part of body; short, angled foot, with slightly concave base.
REDMG:1953.25.77 Large circular, deep body, flat shoulder, slightly raised, concave discus with a small filling hole in the centre. the beginnings of two nozzles, both sided are concave with large decorative features protruding from either side. Base of handle remains with half of the hole left. Ring base, slightly concave. 2005.01.0270.jpg
REDMG:1953.25.78 Circular shallow body, concave shoulder leading to a large filling hole. Beginnings of a band handle. Wide shallow nozzle tilts slightly upwards, large oval wick hole. flat unlimited base. 2003.93.0127.jpg
REDMG:1958.111.1 Slightly flaring cup mouth, with a slightly convex upper surface; strap handle (lopsided) rises from the top of the neck and rejoins at the middle of the shoulder; cylindrical neck, broadening at the bottom, offset from the globular body, above a broad ring base, convex in profile, with a thin resting surface and slightly concave underside. 2004.99.0928.jpg
REDMG:1958.112.1 Cup mouth with flat rim, tall cylindrical neck, slightly widening at the top, curving into a diagonal shoulder, below which (from a carination) the body tapers slightly, and then curves sharply to join a tall moulded base, with straight sides, slightly concave on the underside, with a cylindrical depression; a vertical strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination. 2004.99.0934.jpg
REDMG:1958.113.1 Ovoid aryballos, with a rounded mouth (now broken), small round vertical handle reaching from just below the mouth to the bottom of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, bossed on the underside.
REDMG:1958.13.1 Small bowl with inverted base and tiny rim. Tiny nub handle and five tiny points project from the rim.
REDMG:1958.16.1 Bowl with rounded body and no base. Wishbone handle and inward rim.
REDMG:1958.19.1 Jug with tall narrow tapering neck, beak spout, and bulbous body. Vertical strap handle joins the base of the neck near the spout and a thrid where the neck and body are joined.
REDMG:1958.23.1 Wide body that tapers at the bottom towards a slightly convex base. The rounded base forces the jug to lean to one side. The tall narrow neck has an everted rim. Single, wide flat strap handle joins the base of the rim and the shoulder.
REDMG:1958.33.1 Jug with bulbous body with delineated flat base. Single strap handle joins the upper body to the centre of the long neck with a funnel-shaped mouth ending with an everted rim.
REDMG:1958.37.1 Jug with ovoid body and everted rim and slightly concave circular foot. Single strap handle joins rim to centre of the body.
REDMG:1961.150.3 Spreading lip above long cylindrical neck, decorated with a moulded ring at the junction with the thin rounded vertical handle, which arches and rejoins at the broadest part of the biconical body; conical foot. Lopsided. 2004.99.0982.jpg
REDMG:1961.150.4 Hemispherical bowl, slightly indented at base, to which is attached a triangular handle with two prongs at the top. 2004.99.0856.jpg
REDMG:1961.199.1 Very narrow neck, from which loops up a small, narrow strap handle, which rejoins at the middle of the broad shoulder. The shoulder curves into a bulbous body, grooved just above a slightly raised base. The underside is slightly concave at its centre. Some circular ridges (comb ot wire marks) remain on the underside. 2004.99.0879.jpg
REDMG:1962.184.33.21 Cup mouth on cylindrical neck, slightly narrowing and then curving to a slightly diagonal shoulder; narrow strap handle extends from the middle of the neck to the bottom of the shoulder, just above a carination, from which descends the nearly straight side walls; body narrow sharply at the bottom to a short stem attached to a tall moulded base, which tapers down. 2004.99.0874.jpg
REDMG:1964.1601 Circular deep body with small shallow nozzle which is slightly up turned at the tip. Large oval wick hole, filing hole is wide and circular, there is no discus. Ribbon handle around the back of the lamp, attaching to the shoulder in two places. Small, slightly uneven foot with a flat base slighitly carrinated. 2003.93.0124.jpg
REDMG:1964.1603.1 Circular deep body with lower body wider than the upper. Flat , slightly concave rim to a large circular filling hole. nozzle is long and flat with small oval wick hole at the tip and a small depression at the end of the tip. Base is flat and circular, wheel or wire marks still exist on the base. Band handle is attached across the back of the lamp. 2003.93.0122.jpg
REDMG:1964.1604.1 Circular body with small convex shoulder leading to a large circular filling hole. Nozzle is straight sided with a slightly dipped tip, level top and a oval wick hole. Handle was a horizontal band handle around the back. Base is circular, large and has a very slight depression. 2005.01.0201.jpg
REDMG:1964.1609.1 Ovoid body with handle and nozzle included in the shape. Flat shoulder, raised rim of discus and slightly sunken discus with filling hole just off the central axis to the front right. Small straight sided nozzle, rounded tip with large, slightly oval wick hole. Small pinched vertical handle attaching from the discus down towards the base. Small unmarked circular base, slightly concave. joining marks still distinguishable. 2005.01.0235.jpg
REDMG:1964.1610.1 Ovoid body, convex shoulder, medium rounded filling hole in the centre at the highest point. Nozzle is part of the body and is the most acute angle, elongated oval wick hole piercing the body. Irregular flat lateral pinched handle, base is a slightly raised ring mirroring the ovoid shape of the body. 2005.01.0257.jpg
REDMG:1964.1611.1 Circular body with convex shoulder and small concave discus (filling hole is destroyed). Small deep nozzle rounded tip and sides, medium size circular wick hole. Small vertical handle with piercing, attached to the shoulder and to the body, extending towards the base. Single ring base. 2005.01.0258.jpg
REDMG:1964.1612.1 Main body; circular with long nozzle, low girth, rim of large circular filling hole is stepped down from the shoulder. Nozzle is smooth and cylindrical with one side deeper than the other. Large circular, high vertical handle attached to the shoulder opposite the nozzle. Small slightly of centre foot is circular and has a concave base. Kick on the interior of the base.
REDMG:1964.1613.1 Circular shallow body with rounded convex shoulder leading to a concave discus with two small filling/air holes along a central axis. Nozzle is of an average length with a rounded wick hole. large un-pierced pinched vertical handle, small circular, slightly concave demarcated base. 2005.01.0262.jpg
REDMG:1964.1614.1 Deep circular body, nearly straight convex shoulder and a deep concave discus with a small filling hole at the centre. Nozzle was flat and had a small round wick hole and probably a rounded tip. high vertical handle reaching down towards the base, circular piercing through the handle. Circular base is demarcated with a single line and is very slightly concave. 2005.01.0193.jpg
REDMG:1964.1615.1 Circular deep body, convex shoulder, small circular concave discus with reasonably large central filling hole. Small rounded nozzle with a medium sized flat, circular wick hole, at base of nozzle there appears to be a small air hole. Flat vertical handle with circular piercing through it. Handle is high above the body and reaches down towards the base. Base is circular and flat, it is delineated by two moulded bands. 2005.01.0139.jpg
REDMG:1964.1616.1 Ovoid body with handle and nozzle included in the shape. Flat shoulder, raised rim of discus and slightly sunken discus with filling hole just off the central axis to the front right. Small straight sided nozzle, rounded tip with large, slightly oval wick hole. Small pinched vertical handle attaching from the discus down towards the base. Small unmarked circular base, slightly concave. joining marks still distinguishable. 2005.01.0217.jpg
REDMG:1964.1617.1 Circular shallow body, concave shoulder with large circular filling hole. Flat, slightly upward tilting nozzle narrowing towards the rounded tip; large oval wick hole. Beginnings of a band handle. Base not outlined, very slightly concave. 2003.93.0169.jpg
REDMG:1964.1618.1 Main body; circular with long nozzle, low girth, rim of large circular filling hole is stepped down from the shoulder. Nozzle has concave sides, tip is splayed, large oval wick hole. Large circular, high vertical handle attached to the shoulder opposite the nozzle. Small foot is circular and has a concave base very small kick on the interior of the base.
REDMG:1964.1620 Small, squat variant of the Classical round-mouthed oinochoe, type B. Round mouth, slightly concave lip, from which extends a short vertical strap handle that reconnects at the bottom of the shoulder; narrow neck, sloping shoulder, sharply curving to a hemispherical body; high ring foot, slightly angled. 2004.99.0251.jpg
REDMG:1964.1621 Wide mouth with moulded, slightly concave lip, and slightly everted rim, below which the short vertical strap handle emerges, bends, and descends to the shoulder. Globular body attached to an angled ring foot. Shape similar to Corinthian round-mouthed oinochoe, type B (cf. Corinth 13, fig. 14), but with a slightly concave lip, and more globular than Corinth T1712: Corinth 13, 228 no. 296-2, pl. 41. 2008.99.0225.jpg
REDMG:1964.1622 Cup mouth with rounded rim, narrowing to a short neck, at the top of which is attached a small vertical strap handle that extends the lower part of the shoulder; wall curves continuously from neck, broadening to a slim ovoid body joined to a broad raised foot that is diagonal in profile; flat underside. 2004.99.0150.jpg
REDMG:1964.1624 Short, baggy oinochoe with pinched, flaring trefoil lip from the back of which rose a (high swung) vertical strap handle, broad neck and a globular body, slightly elongated at the back where the handle reattaches; rounded base. 2004.99.0139.jpg
REDMG:1964.1625 Trefoil lip, attached to a short neck curving smoothly into a squat, baggy, body; high curving strap handle reaches from back of lip to middle of body; slightly raised base with flat underside. 2004.99.0126.jpg
REDMG:1964.1626 Trefoil mouth attached at the back to a high-swung vertical handle (missing) that reattached at the bottom of the diagonal shoulder; below carination, body bulges and then tapers to a flat base, slightly concave on the underside. For tall trefoil oinochoai see Corinth 13, 131 fig. 14, 133, e.g. Corinth T1298-99: Corinth 13, 312 nos. D 49-f-g, pl. 57. 2004.99.0156.jpg
REDMG:1964.1647 Large trefoil oinochoe. High swung strap handle emerges from below the trefoil mouth and reattaches at the middle of the shoulder; slightly concave neck with a step at the top of th the slightly sloping shoulder that curves continuously to a squat, rounded body; broad angled foot with slightly raised base.
REDMG:1964.1648 Projecting rim, with rounded lip and with slightly concave mouth, from which emerges a narrow cylindrical neck, grooved at the base; sloping shoulder; narrow strap handle that curves down to the middle of the shoulder; globular body with a flat bottom. 2002.97.0026.JPG
REDMG:1964.1649 White-ground lekythos, group iii. Tall cylindrical neck broadening to a diagonal shoulder. Vertical strap handle rises from top of neck to bottom of the shoulder, where it broadens. Below the handle attachment a carination marks the join with the straight body, which narrows at the base to a molded pedestal foot with a slightly concave outer edge, convex underside, indented in the centre.
REDMG:1964.1685.1 Handle 2006.20.0518.jpg
REDMG:1964.1687.1 Fragment of handle and adjacent part of rim.
REDMG:1964.1699.1 Everted rounded rim which tapers to a short neck and then broadens to a body with nearly vertical sides, slightly tapering to a flat base; round vertical handle, twisted, extends from the rim to the shoulder. 2004.99.0389.jpg
REDMG:1964.1707.1 Everted thickened and rounded rim, from the back of which extends a round vertical handle that joins the body at the middle of the biconical body with a flat, rough base.
REDMG:1964.1710.1 Probably had a wishbone handle. Typical Late Cypriot I shape. Rounded base. 2008.99.0253.jpg
REDMG:1997.209.3 Ovoid aryballos, with a rounded mouth, narrow cylindrical neck, pinched round vertical handle reaching from just below the mouth to the middle of the high shoulder, which curves continuously into the body, with convex side walls, narrowing to a slightly flaring raised base, flat on the underside.
REDMG:1998.153.4 Round mouth with slightly flaring lip from which rises a vertical strap handle that reattaches at the bottom of the shoulder; mouth curves into a short, thin neck, which curves out sharply to sloping shoulders on top of a squat, rounded body; broad, slightly angled foot, with slightly concave base and wire marks. 2004.99.0846.jpg
REDMG:2003.92.1 Squat rounded body that tapers towards a ring base. Single strap handle joins the long narrow and leaning neck near the thick rim and shoulder.
REDMG:2003.93.1 Squat wide body that tapers towards a ring base. The body is flat and angled in places. Single-reliefed handle joins the long tapering neck near the thick rim and shoulder.
REDMG:2004.95.1 Phanyllis shape: Cup mouth with flat lip, cylindrical neck broadening to a diagonal shoulder; strap handle extends from the middle of the neck to the bottom of the shoulder, just above the carination, from which descends an ovoid body that narrows at the bottom to a flat disk foot, with a conical depression at the centre of the underside. 2004.99.0868.jpg
REDMG:2004.98.1 Cup mouth, with a slightly convex upper surface; tall cylindrical neck, from which rises a thin vertical strap handle, that rejoins the diagonal shoulder just above the carination; straight sides, taper gently towards the base, to which is attached a molded pedestal foot, slightly concave on the underside, with a cylindrical depression at centre. 2004.99.0924.jpg
TEMP.2003.6.11 Skyphos or Kantharos? The rim is torus-shaped and sloping and the handle is vertical with a central rib.
TEMP.2003.6.12 The handle is riddled, of ellipsoid cross-section, curving upwards, higher than the rim. 2006.20.0466.jpg
TEMP.2003.6.13 Fragment of the double handle of an oinochoe. 2006.20.0629.jpg
TEMP.2003.6.3 (a) Part of a triple handle and part of the area of the body where it was joined. (b) Part of lower body area and ring-shaped base with a concave area, whose central, inflated part is pointed.
TEMP.2003.6.6 Two-handled skyphos. The double, riddled handle is of ellipsoid cross-section and curves upwards (higher than the body). 2006.20.0464.jpg
TEMP.2003.6.7 Two-handled skyphos. The handles are of ellipsoid cross-section, riddled and curving upwards (higher than the body). a) Part of the rim and body. c) Part of the body. d) One handle and part of the body. e) Part of the other handle. f) Tiny bit of the handle. g) Part of the handle and body. 2006.20.0406.jpg
TEMP.2003.6.8 Skyphos with ring-shaped foot and one or two handles, missing. a, b, d, and e) Parts of the rim and body. c)Part of the rim and body and the spring of one handle (completely missing). f) The largest part of the foot, base and lowest part of the body. g) Part of the lower body.
TEMP.2003.7.66 U-shaped handle 2006.20.0493.jpg
TEMP.2007.2.43 Fragment of a handle from a cup-mouth 2007.10.0035.jpg
TEMP.2007.2.47 Handle 2007.10.0047.jpg
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH