Ure Museum Database



Browse
There are 92 objects for which Shape_description contains → horizontal
13.10.26 Shallow bowl; horizontal rim with two holes for suspension at one side, one of the holes has a thin piece of rope in it (modern?)and clay; the base is slightly bulbous (the shape is slightly irregular leading to an incline of the rim to one side); interior smooth; 'ridges' can be felt on the exterior where the clay was turned on the potter's wheel; short, wide resting surface. 2003.92.0071.jpg
14.9.108 Inset rim to receive lid. Two horizontal circular handles with side protrusions, one on each side, are just below rim on each side of lekanis. 2003.30.0010.jpg
2007.9.4 Both long edges are curved, one more greatly so, resulting in the width of fragment being much wider at one end, meetimg the horizontal edge at a small point.
2008.7.192 Rectangular rim fragment, horizontal curvature
2008.7.195 Pentagonal rim fragment; horizontal curvature
2008.7.196 Pentagonal shaped fragment; horizontal curvature
2008.7.54 Hexagonal fragment from possibly neck of a pot as the exterior top of the fragment curves out into what could be a lip; exterior base of fragment also begins to curve outwards; horizontal curvature to the fragment
2008.7.73 Rectanglar fragment with horizontal curvature
2008.7.74 Hexagonal fragment; horizontal curvature; slight vertical curvature at one end of the fragment
2008.7.76 Pentagonal fragment; horizontal curvature; slight vertical curvature at one end of fragment
22.3.40 Downturned molded rim, from which projects the horizontal element of a ridged strap handle that curves back in and descends to the shoulder. Body drops sharply from shoulder and tapers to raised base. Cf. several examples in Lipari 2, esp. Lipari 2, 138, pl. CXXXVI.4a (tomb 385, 'stile Gnathia') 2003.37.0005.jpg
22.3.42 Open lamp with wide, shallow, circular body, with curved shoulder and a down turned rim. covered flat nozzle with a large oval wick hole. Horizontal band handle which follows the back of the body. Foot is shallow and slightly concave 2004.95.0093.jpg
22.3.6 Corinthian type. Handles are circular and horizontal and opposite each other. 2003.97.0574.jpg
23.11.10 Flat base, bulbous lower body to which are attached two horizontal strap handles, which rise slightly; flaring upper body and plain, rounded lip. 2004.98.0008.jpg
23.11.31XXX Female wearing a long patterned skirt. The upper, larger section of the skirt is divided into four vertical bands made up of wide plain, narrow plain, wide plain, and single-line zigzag motifs. These are terminated with two horizontal bands running around the hem. 2003.96.0029.jpg
23.11.31ZZ Female facing right, wearing a long skirt marked with horizontal bands. The straight line of the back projects above the head. One arm is raised in front of the body, and the other is held at waist level. 2005.06.0161.jpg
23.11.8 Flat base; bulbous lower body from which emerge two horizontal handles, circular in cross-section, which rise slightly; carinated at join to upper body which flares broadly to a plain, rounded rim. 2004.98.0024.jpg
26.7.12 Curved, semi-circular then pinched horizontal section form back of pin. Ridge runs down back.
28.9.1 Mouth flares out and rim is flat. High vertical handle joined to rim with surs either side. Body has two horizontal handles. Base has central convex circle. 2003.44.0002.jpg
29.11.6 Two u-shaped horizontal handles placed slightly above the lip, slightly angled upwards. Deep body descending to a groove above the ring base. 2004.05.0024.jpg
29.5.5 Handles move straight out horizontal to the body and both have small horns either side. 2003.19.0005.jpg
34.10.6 Two rounded, horizontal handles at rim on opposite sides; deep, straight sided body; groove; small base 2003.02.0010.jpg
34.2.2 Small hydria with plain everted rim, with a round lip, curving continuously to a narrow concave neck and a sloping shoulder, then an ovoid body attached to a short disk foot, tapering on both exterior and interior, with a flat resting surface and a pointed underside. The vertical strap handle, slightly concave on its outer side, reaches from the lip to the widest part of the body, where it curves into the shoulder. Two horizontal d-shaped, upcurving handles, round in section, also rise up from the join of the shoulder and body. 2010.98.0285.jpg
37.11.4 Type B, formerly called 'glaux'. One horizontal handle and one vertical, both circular. Handles are attached just below rim which curves inwards. 2003.97.0666.jpg
37.11.5 Straight sided, fairly deep, rimless bowl; two horseshoe-shaped horizontal handles attached just below the thin rim; thin groove before base. Flaring ring foot. 2003.97.0555.jpg
37.11.6 Squat skyphos. Horseshoe-shaped horizontal handles widen outwards attached just below rim; groove; cushiony flaring ring-foot. 2008.10.0005.jpg
38.4.7 One vertical and two horizontal handles. Mouth tapers to long, wide neck. Vertical handle from top of shoulder almost to top of neck. 2003.95.0088.jpg
39.1.2 Strongly moulded rim, curving into a roughly cylindrical upper body that bulges out into the shallow bowl. Two vertical handles, roughly square in section, with horizontal pointed spurs, level with the rim, rejoin the body at the upper part of the bowl. Two-part moulded foot, with a domed underside. 2010.98.0301.jpg
47.10.3A-B Lid: tall, conical, flat-topped knob on a sharply sloping conical lid, with plain rim, vertical profile, flat underside, leading to a short flange (0.3) to sit within lekanis. Lekanis: slightly everted, rounded rim with flat lip, on a deep bowl with straight walls in two parts, separated by a sharp carination near the bottom, attached to a short disk foot, angled on inside and out, with a slightly convex underside. From either side of the rim extends a semicircular horizontal handle, round in section, that rises very slightly, flanked by short pointed spurs or lugs on either side of the handle. 2010.98.0012.jpg
47.2.1 Type B, formerly known as 'Glaux'. Rounded, incurved rim, below which are two round handles, one horizontal and one vertical; tall bulbous body tapering towards torus ring foot. 2003.97.0563.jpg
47.2.3 Castulo cup: large stemless cup with inset lip. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising slightly over the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove. 2008.10.0012.jpg
47.2.5 Rounded thin rim, below which are attached two horizontal round handles, horseshoe-shaped; vertical wall curving into a shallow bowl, on a broad, flaring ring foot with a continuous concave interior surface from the underside through the resting surface. 2008.98.0406.jpg
47.2.6 Slightly flaring rim, flattened at the top, but sloping inwards; angled wall that curves sharply to a shallow bowl; horizontal, horseshoe-shaped strap handle, attached just below the rim and rising slightly above; broad torus ring foot. 2001.99.0123.jpg
47.2.7 Slightly flaring rim, flattened at the top, on an angled wall that curves sharply to a shallow bowl; horizontal strap handle, nearly triangular, attached just below the rim, rising slightly upwards; groove at the junction of body and broad ring foot, slightly convex at centre of underside. 2008.98.0404.jpg
47.6.4 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in centre. 2008.99.0577.jpg
47.6.5 Rounded, everted rim, just below which a vertical strap handle emerges and extends to the shoulder, where there are two horizontal strap handles. Concave base, peaked in the centre. 2008.98.0301.jpg
47.7.1 Rounded rim, slightly outturned, below which are attached two horizontal round handles, u-shaped, slightly curving upwards; vertical wall curving into shallow bowl, on a broad, flaring ring foot with a convex underside. 2010.98.0267.jpg
48.12.2 Deep bowl (corresponds to FS [='Furumark Shape'] 285). The shape seems somewhat less deep than most published deep bowls. The best comparison to be found is in Mountjoy 1999, 1.189 Argolid no. 447, from Asine, House I, room 46. Bowl of pinkish fabric with flaring lipless rim, concave sides, tapering in lower part to a high ring base (is it conical?). Two horizontal round handles are attached to the side walls. 2003.98.0127.jpg
48.12.3 Tall, slightly out turned rim; small rounded horizontal handles at the beginning of the body, rising upwards, fairly deep body; thick conical footring; conical underside. 2002.97.0519.jpg
49.12.1 Everted, nearly flat rim, with round lip, curves sharply to a cylindrical upper body, somewhat concave, separated from the lower body by a ridge above a flange. The lower body is comprised of four horizontal ribs, above a shallow bowl that narrows to a thin, short stem, that curves continuously into a conical foot, finishing with a broad groove above a rounded edge. The underside is hollowed. Two strap handles, which flare on either side, rise up above the rim and then descend to rejoin the body at the flange. A spur projects from the lower part of each handle, approximately in the middle of the upper body. 2008.98.0387.jpg
50.10.6 Deep bowl; two horizontal handles emerge from just below the rim; vertical walls taper down to small disk foot; concave underside with central convex circle. 2004.07.0006.jpg
50.4.10 Type C cup. Slightly everted rim with thickened concave lip, from below which emerge two horizontal rounded handles in an oblong shape, that curve up to just below the rim. Shallow bowl flows uninterrupted into a thick stem, which tapers out until a ridge, below which it is cylindrical; thick torus ring foot with slightly sloping upper side and conical underside. 2003.92.0271.jpg
50.4.12 Castulo cup': large stemless cup. Slightly outturned rim with concave lip, inset on interior and exterior, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim. Shallow bowl divided from a spreading, lipped torus ring foot by a broad groove. 2003.97.0532.jpg
50.4.13 Attic type skyphos (cf. Agora 12, no. 341) except for plain underside, size (somewhat smaller than Attic examples), and perhaps breadth of handles. Rounded rim, below which are two horizontal round handles, horseshoe shaped. Walls continuously curve into a deep bowl, divided from the short torus ring foot by a groove. 2003.97.0646.jpg
51.1.2 The vertical handle is of ellipsoid cross-section with a banded back. The horizontal handles are riddled, circular and slightly curving upwards. The foot is conical, with a ring-shaped termination and the base has a concave, conical surface with an inflated semi-spherical central part. 2010.98.0180.jpg
51.4.8 The rim is slightly flared and the neck is short; a strap vertical handle curves down from the rim to the shoulder; two smaller, round, horizontal handles protrude from the upper side of the rounded and pear shaped body; the foot is small and flaring; the base is convex
51.7.11 A large bell krater with a downturned, rounded rim, two recurved horizontal handles high on the body, the lower body sloping sharply to a thick stem, and a thick, molded, angled pedestal foot. 2004.80.0002.jpg
52.3.3 Broad flat rim; short thick neck; handles are comprised of two vertical bars joined at the rim by an overhanging horizontal bar with downward protrusions at either end; body tapers to conical footring; flat base. 2003.95.0050.jpg
52.3.4 Slightly convex, slanted, overhanging lip, rounded at the edge, on a slightly concave tapering rim, slightly offset from the lower bowl that curves sharply to a tall conical foot, rounded at the edge, with flat resting surface and a slightly convex underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs (handle and lugs broken off on one side). 2004.07.0009.jpg
53.8.3 Slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs. 2010.98.0024.jpg
56.8.8 The body is conical, widening towards the top. The rim has horizontal sides and a small lip at the top. The band handles are almost ellipsoid, with peaked terminations. Ribbon handles. The base is in the shape of an inverted echinus (a conical stand?). 2003.95.0104.jpg
60.1.3 Stemless cup with a plain rounded rim. Two horizontal round handles, oblong in shape, incurved and rising over the rim. Handles rise from half-way down the shallow bowl, which is divided from spreading, lipped torus ring foot by a broad groove. 2003.94.0022.jpg
60.8.2 Rim of the mouth is a little bit wonky, with a ridge on the flat top. Cylindrical short neck. Almost flat shoulder. A single rounded handle curves down to the shoulder from the rim, and two horizontal, horseshoe shaped handles emerge from the top of the body. Body tapers down to small torus foot 2002.97.0709.jpg
61.6.5 Lid: Short button knob, with flat band, beveled interior edge, and slightly convex top, curving smoothly to a nearly flat underside that smoothly joins a short, slightly concave stem, that again smoothly joins a flat, tapering smoothly to a short vertical rim, rounded at both edges. The underside is hollowed under the knob. One-handler: shallow bowl with a short nearly vertical flange, rounded at the lip, straight but tapering walls curving into a convex lower portion then a very short stem, on a rounded disk foot, with a flat resting surface, beveled on the interior, and slightly convex on the underside. A single, recurved horizontal handle, round in section, rises above the rim. 2002.97.0677.jpg
71.6.3 Two thick, rounded, horizontal handles, one on each side just below rim. Broad body with near horizontal sides; torus ring foot 2008.99.0717.jpg
78.7.1 Deep skyphos; two rounded, horizontal handles emerging from just below the rim; tall, rounded foot 2008.98.0440.jpg
80.7.1 Large lekanis with a slightly convex, rounded, overhanging lip on a tall, tapering rim, a carination at the junction with the sharply sloping body or bowl of the lekanis, on a tall, sloping ring foot, with flat resting surface, angled walls on exterior and interior, and a nearly flat underside. On either side of the rim is attached a horizontal, u-shaped ribbon handle, between a pair of lugs. 2010.98.0222.jpg
E.23.38 Coffin lid ornament: backbone of Osiris. The object is a cross shape. The horizontal piece of the cross is a square with three horizontal lines carved across it. This is placed about nine-tenths of the way up the vertical piece. Just below the horizontal square are three finer carved lines. 2002.98.0077.jpg
L.2011.1.51 Fragment of rim and one handle, evidence of the connection of the second handle. Vertical short handle with the right side more protruding, extended from the lower part of the rim to the shoulder. Short cylindrical neck, flaring in a quite horizontal shoulder. 2011.97.0332.jpg
REDMG:1934.26.1 Small cup with rounded rim on a flaring lip that sharply joins a shallow bowl with bulging profile; two horizontal round handles, canted up, join at the broadest part of the bowl. The bowl has almost no stem but attaches directly to a raised ring base with diagonal profile, slightly convex resting surface, and slightly pointed underside. 2004.99.0896.jpg
REDMG:1935.87.15 Plain rim with flat lip, just below which is attached a horseshoe shaped horizontal handle, slightly canted and rising to just above the rim;.flattened hemispherical body attached to a ring foot, rounded on the outer surface, with a flat resting surface, and curved interior wall, offset from pointed underside. 2003.93.0012.jpg
REDMG:1935.87.6 Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards, to which spurs are attached on either side. The lower body is offset from the handle zone, rounded in the lower part where it sharply joins a moulded foot, with groove above a spreading upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface, and a pointed, slightly offset underside.
REDMG:1951.113.3 Rounded rim, slightly incurving, below which are attached two nearly triangular horizontal strap handles and ring base, canted slightly up; rounded body broadens slightly and then narrows to an angled ring foot, curved on the resting surface, and offset from the slightly convex underside. Body broader than standard Apulian shape, so that it can't fit easily into the sequence of Gnathian skyphoi.
REDMG:1951.133.1 Shallow ellipsoid bowl with rounded rim, underneath which are attached two horizontal round sections, curving up above the rim, rectangular in shape, and bent in at the tops. Deep angled ring foot, with a narrow, rounded resting surface, convex on the interior vertical surface, and flat on the underside.
REDMG:1951.134.1 Plain rounded rim, body nearly vertical at top and curving into a deep bowl, which narrows to a short stem attached to a disk foot with a rounded resting surface, small underside pointed at centre. Two horseshoe-shaped horizontal round handles, attached slightly below the rim. 2004.99.0768.jpg
REDMG:1951.135.1-2 Pyxis: Flanged rim widening to sharply curved shoulder, rounded below, and tapering to a flat base; round horizontal handles on either side pressed up against rim to form lugs. Lid: cylindrical knob attached to a disk. 2004.99.0428.jpg
REDMG:1951.140.1 Broad rim, slightly convex on upper surface, ridged at the outside edge, with overhanging lip; neck, concave in profile, broadens to a nearly flat shoulder that curves sharply to an ovoid body, which narrows sharply at the bottom, where it is joined to a moulded pedestal foot with a splayed base and concave underside; upper part of foot has tapering straight sides; the profile of the base is decorated with two ridges. Two incurving horizontal handles, round in sectiona, are attached to the upper third of the body; a vertical handle, also round in section, emerges from the top of the neck and curves down to the lower part of the shoulder. 2004.99.0810.jpg
REDMG:1951.141 Flaring rounded rim with flat lip, narrowing to a funnel-shaped body that curves sharply in the lower part to a broad stem that flares into a molded pedestal base, with a slanted exterior, ridged on the upper part, and a concave underside, pointed at the centre; two incurving horizontal round handles are attached just above the centre of the body.
REDMG:1951.146 Plain rim, concave sides, high ring foot; two horizontal round handles, canted slightly up, just below rim.
REDMG:1951.160.1 Large krater with everted mouth and downturned rim, two recurved horizontal round handles attached to the upper part of the cylindrical body, which narrows to ashort, broad stem that curves into a pedestal foot, with a recessed band above slightly tapering sides, hollowed within. 2003.95.0072.jpg
REDMG:1951.161.1 Overhanging everted lip with rounded rim curves sharply a near cylindrical body, narrowing to a tapering stem, which in turn is joined to a hollowed, moulded pedestal base;.the upper surface of the base is nearly flat, surrounded by a ridge and then a groove from which the nearly vertical sides descend; two incurving round horizontal handles are attached just above the middle of the body. 2005.90.0006.jpg
REDMG:1953.25.2 Rounded, slightly everted rim, below which are attached two horizontal handles, rounded on the outsides and slightly flattened on the insides, slightly canted and rising above the rim. Body bulges slightly below handles but otherwise tapers gradually to a thick raised base, which is slightly broader than the lowest part of the body. The underside is circumscribed with a lightly gouged band. 2005.99.0144.jpg
REDMG:1953.25.3 Plain rim, slightly concave on the interior, below which are two horizontal round handles; tapering wall; angled ring foot, with convex resting surface. 2004.99.0355.jpg
REDMG:1953.25.39 Flanged rim and tapering body, to which are attached broad horizontal strap handles (rounded but almost oblong in shape), slightly canted upwards, with spurs on either side. The lower body is offset from the handle zone, rounded in the lower part where it attached to thick stem broadening to a moulded foot, with spreading upper part, slightly concave, and a broader, rounded lower part, broadening towards the base, with a conical depression on the interior, and a narrow resting surface 2005.99.0148.jpg
REDMG:1953.25.4 Plain rim, below which are attached two horizontal round handles; curved sides, nearly vertical at the top and tapering more sharply towards the angled ring foot. Shape corresponds to Corinth black-glazed skyphoi, group iii, although the pattern on this skyphos is quite different. 2003.93.0325.jpg
REDMG:1953.25.40 Rounded rim on tapered flange, below which the walls spread out to a thin element that would have supported the lid; just below this are attached two horizontal horseshoe-shaped strap handles, slightly canted upwards. The body is rounded in the lower part and sharply joins a moulded foot, with an angled upper part and a broader, rounded lower part, hollow on the interior, with a narrow resting surface. 2003.97.0324.jpg
REDMG:1953.25.41 Flanged rim and tapering body, to which are attached horizontal triangular strap handles, slightly canted upwards. The body narrows sharply to short stem, slightly offset from the top of a moulded foot, with a vertical exterior surface and a conical indentation on the underside, and a narrow resting surface. 2005.99.0127.jpg
REDMG:1953.25.44 Flaring rim, with concave profile, joining bulging body at a carination, below which are attached two u-shaped horizontal handles, rounded in section, canted slightly up; below handles body curves sharply towards stem, broken off. 2004.99.0501.jpg
REDMG:1953.25.45 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot.
REDMG:1953.25.46 Rounded rim, slightly incurved, on concave lip, below which are attached two horizontal round handles, oblong in shape, incurved and rising to the height of the rim; deep bowl joins a spreading, lipped torus ring foot. 2004.99.0631.jpg
REDMG:1953.25.47 Rounded everted rim on concave lip, below which are attached two horizontal round handles, oblong in shape, canted and slightly incurved, rising to just below the rim; deep bowl joins a spreading, lipped torus ring foot with a sloping resting surface.
REDMG:1953.25.5 Plain rim below which are attached two horizontal round handles; concave sides tapering down to a narrow, angled ring foot with convex resting surface. Semi-glazed skyphos, type ii: see Corinth 13, 125 fig. 13 2004.99.0200.jpg
REDMG:1953.25.62 Broad mouth with thickened downturned rim. Slender neck sloping to a nearly horizontal shoulder, from which emerge two lug handles, just below a moulded band; finely ribbed body that tapers to a short raised base.
REDMG:1953.25.9 Corinthian type skyphos. Rounded incurved rim below which emerge two horizontal round handles, rising slightly; tall, thin-walled body bulges at top and tapers sharply to a flaring ring foot with a concave resting surface and raised underside.
REDMG:1953.41.1 Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, slightly incurving. A short stem, slightly concave, attaches the bowl to a thick disk foot, convex on the underside (a continuation of the rounded resting surface) but hollowed through the middle of the stem. 2005.99.0133.jpg
REDMG:1964.1604.1 Circular body with small convex shoulder leading to a large circular filling hole. Nozzle is straight sided with a slightly dipped tip, level top and a oval wick hole. Handle was a horizontal band handle around the back. Base is circular, large and has a very slight depression. 2005.01.0201.jpg
REDMG:1964.1628 Plain rim below which are attached two horizontal round handles; concave sides tapering down to a narrow, angled ring foot, concave on underside, with circular protruberance. 2003.93.0115.jpg
REDMG:1964.1631 Very thin walls, with rounded rim, just below which are attached horizontal handles. Walls slightly concave, divided from a spreading, lipped torus ring foot, with a pointed resting surface, by a pair of grooves. This example corresponds to Ure's Class II.C skyphos, particularly (ii) which includes reddish-purple bands just below the level of the handles, perhaps a band at the bottom of the body where it joins the ring foot, and concentric purple bands on the underside (or plain black or reserved undersides). See Ure 1927, 24.
REDMG:1964.1632.1 Deep skyphos. Thin rim, slightly averted, below which u-shaped round horizontal handles are attached, and rise slightly to just above the height of the walls. The sides, tapering down, are slightly convex at the top and concave below, terminating in a groove, just above the short raised base with a flat underside, grooved on the outside. 2006.20.0246.jpg
REDMG:1964.1663 Rounded, slightly raised rim; two pinched round horizontal handles, round in section, rise at a diagonal from the sloping shoulders which curve gently down to a small raised base, concave on the underside. 2003.93.0363.jpg
REDMG:1964.1678 Rounded, slightly outturned concave rim; two horizontal round handles, pi-shaped, applied to the outside of the rim, with tops pressed down across the top; shallow bowl; flat base with wire comb or wire marks.
REDMG:2004.96.1 Palmette. Rounded rim on a concave lip, above shallow bowl; just below lip are attached two round horizontal handles, rectangular in shape, canted and slightly incurved, rising to just below the height of the rim. A short stem, slightly concave, attaches the bowl to a thick disk foot, with a groove at the outer edge of the vertical surface; broad, convex resting surface; hollowed through the middle of the stem. 2004.99.0960.jpg
The Ure Museum is part of
The University of Reading, Whiteknights, PO Box 217, Reading, RG6 6AH